74ABT240 FAIRCHILD

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 8

Technical content

Features

I Output sink capability of 64 mA, source capability of 32 mA I Guaranteed latchup protection I High impedance glitch free bus loading during entire power up and power down cycle I Nondestructive hot insertion capability Ordering Code: Device also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering code. Pb-Free package per JEDEC J-STD-020B. Connection Diagram Pin Descriptions Truth Tables H /c32 HIGH Voltage Level L /c32 LOW Voltage Level X /c32 Immaterial Z /c32 High Impedance Order Number Package Number Package Description 74ABT240CSC M20B 20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide 74ABT240CSJ M20D Pb-Free 20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 74ABT240CMSA MSA20 20-Lead Shrink Small Outline Package (SSOP), JEDEC MO-150, 5.3mm Wide 74ABT240CMTC MTC20 20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Pin Names Description OE 1, OE2 3-STATE Output Enable Inputs I0–I7 Inputs O 0–O 7 Outputs Inputs Outputs OE 1 In (Pins 12, 14, 16, 18) LL H LH L HX Z Inputs Outputs OE 2 In (Pins 3, 5, 7, 9) LL H LH L HX Z

www.fairchildsemi.com 2 74ABT240 Absolute Maximum Ratings(Note 1) Recommended Operating Conditions Note 1: Absolute maximum ratings are values beyond which the device may be damaged or have its useful life impaired. Functional operation under these conditions is not implied. Note 2: Either voltage limit or current limit is sufficient to protect inputs. Note 3: Guaranteed, but not tested. Note 4: For 8 bits toggling, ICCD /c31 0.8 mA/MHz. Storage Temperature /c16 65/c113 C to /c14 150/c113 C Junction Temperature under Bias /c16 55/c113 C to /c14 150/c113 C VCC Pin Potential to Ground Pin /c16 0.5V to /c14 7.0V Input Voltage (Note 2) /c16 0.5V to /c14 7.0V Input Current (Note 2) /c16 30 mA to /c14 5.0 mA Voltage Applied to Any Output in the Disabled or Power-Off State /c16 0.5V to 5.5V in the HIGH State /c16 0.5V to VCC Current Applied to Output in LOW State (Max) twice the rated I OL (mA) DC Latchup Source Current (Across Comm Operating Range) /c16 150 mA Over Voltage Latchup (I/O) 10V Free Air Ambient Temperature /c16 40/c113 C to /c14 85/c113 C Supply Voltage /c14 4.5V to /c14 5.5V Minimum Input Edge Rate (/c39 V//c39 t) Data Input 50 mV/ns Enable Input 20 mV/ns Symbol Parameter Min Typ Max Units VCC Conditions VIH Input HIGH Voltage 2.0 V Recognized HIGH Signal VIL Input LOW Voltage 0.8 V Recognized LOW Signal VCD Input Clamp Diode Voltage /c16 1.2 V Min I IN /c32 /c16 18 mA VOH Output HIGH Voltage 2.5 V Min I OH /c32 /c16 3 mA

2.0 V Min I OH /c32 /c16 32 mA

VOL Output LOW Voltage 0.55 V Min I OL /c32 64 mA IIH Input HIGH Current 1 /c80 AM a x VIN /c32 2.7V (Note 3) 1V IN /c32 VCC IBVI Input HIGH Current Breakdown Test 7 /c80 AM a x V IN /c32 7.0V IIL Input LOW Current /c16 1 /c80 AM a x VIN /c32 0.5V (Note 3) /c16 1V IN /c32 0.0V VID Input Leakage Test 4.75 V 0.0 I ID /c32 1.9 /c80 A All Other Pins Grounded IOZH Output Leakage Current 10 /c80 A0 /c16 5.5V VOUT /c32 2.7V; OEn /c32 2.0V IOZL Output Leakage Current /c16 10 /c80 A0 /c16 5.5V VOUT /c32 0.5V; OEn /c32 2.0V IOS Output Short-Circuit Current /c16 100 /c16 275 mA Max V OUT /c32 0.0V ICEX Output HIGH Leakage Current 50 /c80 AM a x V OUT /c32 VCC IZZ Bus Drainage Test 100 /c80 A0 . 0 V OUT /c32 5.5V; All Others GND ICCH Power Supply Current 50 /c80 A Max All Outputs HIGH ICCL Power Supply Current 30 mA Max All Outputs LOW ICCZ Power Supply Current 50 /c80 AM a x O E n /c32 VCC ; All Others at VCC or Ground ICCT Additional ICC /Input Outputs Enabled 1.5 mA Max VI /c32 VCC /c16 2.1V Outputs 3-STATE 1.5 mA Enable Input V I /c32 VCC /c16 2.1V Outputs 3-STATE 50 /c80 A Data Input V I /c32 VCC /c16 2.1V All Others at VCC or Ground ICCD Dynamic ICC No Load mA/ Max Outputs Open (Note 3) 0.1 MHz OE n /c32 GND, (Note 4) One Bit Toggling, 50% Duty Cycle

3 www.fairchildsemi.com 74ABT240 Capacitance Note 5: C OUT is measured at frequency f /c32 1 MHz, per MIL-STD-883, Method 3012. TA /c32 /c14 25/c113 CT A /c32 /c16 55/c113 C to /c14 125/c113 CT A /c32 /c16 40/c113 C to /c14 85/c113 C VCC /c32 /c14 5V V CC /c32 4.5V–5.5V V CC /c32 4.5V–5.5V Symbol Parameter C L /c32 50 pF C L /c32 50 pF C L /c32 50 pF Units Min Typ Max Min Max Min Max ns ns ns Symbol Parameter Typ Units Conditions TA /c32 25/c113 C C IN Input Capacitance 5.0 pF V CC /c32 0V C OUT (Note 5) Output Capacitance 9.0 pF V CC /c32 5.0V

www.fairchildsemi.com 4 74ABT240 AC Loading *Includes jig and probe capacitance Standard AC Test Load Test Input Signal Levels Test Input Signal Requirements AC Waveforms Propagation Delay, Pulse Width Waveforms 3-STATE Output HIGH and LOW Enable and Disable Times Propagation Delay Waveforms for Inverting and Non-Inverting Functions Setup Time, Hold Time and Recovery Time Waveforms Amplitude Rep. Rate t W tr tf 3.0V 1 MHz 500 ns 2.5 ns 2.5 ns

5 www.fairchildsemi.com 74ABT240 Physical Dimensions inches (millimeters) unless otherwise noted 20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide Package Number M20B

www.fairchildsemi.com 6 74ABT240 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) Pb-Free 20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Package Number M20D

7 www.fairchildsemi.com 74ABT240 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 20-Lead Shrink Small Outline Package (SSOP), JEDEC MO-150, 5.3mm Wide

www.fairchildsemi.com 8 74ABT240 Octal Buffer/Line Driver with 3-STATE Outputs Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD ’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be rea- sonably expected to result in a significant injury to the user. 2. A critical component in any component of a life support device or system whose failure to perform can be rea- sonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com