74ABT20 PHILIPS

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 3

Technical content

Philips Semiconductors Product specification 74ABT20Dual 4-input NAND gate

11995 Sep 22 853-1811 15793

Tamb = 25°C; GND = 0V TYPICAL UNIT tPLH tPHL Propagation delay An, Bn, Cn, Dn to Y n C L = 50pF; VCC = 5V 2.7 2.2 ns tOSLH tOSHL Output to Output skew CC 0.3 ns C IN Input capacitance VI = 0V or VCC 3 pF ICC Total supply current Outputs disabled; V CC = 5.5V 50 µA PIN CONFIGURATION GND VCC NC NC SA00350 PIN DESCRIPTION PIN NUMBER SYMBOL NAME AND FUNCTION 1, 2, 4, 5, 9, 10, 12, 13 An, Bn, Cn, Dn Data inputs 6, 8 Yn Data outputs

7 GND Ground (0V)

14 VCC Positive supply voltage

VCC = Pin 14 GND = Pin 7 SA00351 LOGIC DIAGRAM VCC = Pin 14 GND = Pin 7 SA00352 LOGIC SYMBOL (IEEE/IEC) SF00068 FUNCTION TABLE INPUTS OUTPUT An Bn Cn Dn Yn L X X X H X L X X H X X L X H X X X L H H H H H L NOTES: H = High voltage level L = Low voltage level X = Don’t care

ORDERING INFORMATION

PACKAGES TEMPERATURE RANGE OUTSIDE NORTH AMERICA NORTH AMERICA DWG NUMBER 14-Pin Plastic DIP –40°C to +85°C 74ABT20 N 74ABT20 N SOT27-1 14-Pin plastic SO –40°C to +85°C 74ABT20 D 74ABT20 D SOT108-1 14-Pin Plastic SSOP Type II –40°C to +85°C 74ABT20 DB 74ABT20 DB SOT337-1 14-Pin Plastic TSSOP Type I –40°C to +85°C 74ABT20 PW 74ABT20PW DH SOT402-1

Philips Semiconductors Product specification 74ABT20Dual 4-input NAND gate

1995 Sep 22 2

ABSOLUTE MAXIMUM RATINGS 1, 2 SYMBOL PARAMETER CONDITIONS RATING UNIT VCC DC supply voltage –0.5 to +7.0 V IIK DC input diode current VI < 0 –18 mA VI DC input voltage3 –1.2 to +7.0 V IOK DC output diode current VO < 0 –50 mA VOUT DC output voltage3 output in Off or High state –0.5 to +5.5 V IOUT DC output current output in Low state 40 mA Tstg Storage temperature range –65 to 150 °C NOTES: 1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. 2. The performance capability of a high-performance integrated circuit in conjunction with its thermal environment can create junction temperatures which are detrimental to reliability. The maximum junction temperature of this integrated circuit should not exceed 150°C. 3. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. RECOMMENDED OPERATING CONDITIONS SYMBOL PARAMETER LIMITS UNITSYMBOL PARAMETER MIN MAX UNIT VCC DC supply voltage 4.5 5.5 V VI Input voltage 0 VCC V VIH High-level input voltage 2.0 V VIL Low-level input voltage 0.8 V IOH High-level output current –15 mA IOL Low-level output current 20 mA Δt/Δv Input transition rise or fall rate 0 10 ns/V Tamb Operating free-air temperature range –40 +85 °C DC ELECTRICAL CHARACTERISTICS SYMBOL PARAMETER TEST CONDITIONS LIMITS UNITSYMBOL PARAMETER TEST CONDITIONS Tamb = +25°C Tamb = –40°C to +85°C UNIT MIN TYP MAX MIN MAX VIK Input clamp voltage VCC = 4.5V; IIK = –18mA –0.9 –1.2 –1.2 V VOH High-level output voltageVCC = 4.5V; IOH = –15mA; VI = VIL or VIH 2.5 2.9 2.5 V VOL Low-level output voltage VCC = 4.5V; IOL = 20mA; VI = VIL or VIH 0.35 0.5 0.5 V IOFF Power-off leakage currentVCC = 0.0V; VO or VI ≤ 4.5V ±5.0 ±100 ±100 µA ICEX Output High leakage currentVCC = 5.5V; VO = 5.5V; VI = GND or VCC 5.0 50 50 µA IO Output current1 VCC = 5.5V; VO = 2.5V –50 –75 –180 –50 –180 mA ICC Quiescent supply current VCC = 5.5V; VI = GND or VCC 2 50 50 µA ΔICC Additional supply current per input pin2 VCC = 5.5V; One data input at 3.4V, other inputs at VCC or GND 0.25 500 500 µA NOTES: 1. Not more than one output should be tested at a time, and the duration of the test should not exceed one second. 2. This is the increase in supply current for each input at 3.4V. 3. For valid test results, data must not be loaded into the flip-flop or latch after applying the power.

Philips Semiconductors Product specification 74ABT20Dual 4-input NAND gate

1995 Sep 22 3

GND = 0V; tR = tF = 2.5ns; CL = 50pF, RL = 500Ω SYMBOL PARAMETER WAVEFORM LIMITS UNITSYMBOL PARAMETER WAVEFORM Tamb = +25°C VCC = +5.0V Tamb = –40°C to +85°C VCC = +5.0V ±0.5V UNIT MIN TYP MAX MIN MAX tPLH tPHL Propagation delay An, Bn, Cn, Dn to Yn 1 1.0 1.0 2.7 2.2 3.9 3.4 1.0 1.0 4.6 3.8 ns tOSHL tOSLH 1 Output to Output skew An or Bn to Yn 2 0.3 0.5 0.5 ns NOTE: 1. Skew is defined as the absolute value of the difference between the actual propagation delay for any two separate outputs of the same device. The specification applies to any outputs switching in the the same direction, either HIGH–to-LOW (tOSHL ) or LOW-to-HIGH (tOSLH ); parameter guaranteed by design. AC WAVEFORMS VM = 1.5V, VIN = GND to 3.0V VMVM VMVM Yn An, Bn, Cn, Dn tPHL tPLH SA00353 Waveform 1. Propagation Delay for Inverting Outputs OUTPUT N same part INPUT SA00381 OUTPUT tPLH MIN tPHL MIN tPLH MAX tPHL MAX tOSLH tOSHL Waveform 2. Common edge skew TEST CIRCUIT AND WAVEFORMS PULSE GENERATOR R T VIN D.U.T. VOUT C L R L VCC Test Circuit for Outputs VM VM tW AMP (V) NEGATIVE PULSE 10% 10% 90% 90% VM VM tW AMP (V) POSITIVE PULSE 90% 90% 10% 10% tTHL (tF) tTLH (tR )t THL (tF) tTLH (tR ) VM = 1.5V Input Pulse Definition DEFINITIONS R L = Load resistor; see AC CHARACTERISTICS for value. C L = Load capacitance includes jig and probe capacitance; see AC CHARACTERISTICS for value. R T = Termination resistance should be equal to ZOUT of pulse generators. INPUT PULSE REQUIREMENTS FAMILY 74ABT SH00067 Amplitude Rep. Rate t W tF 3.0V 1MHz 500ns 2.5ns tR 2.5ns