74ABT16374B PHILIPS
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 10
Technical content
/C0109 /C0110 /C0114 74ABT16374B 74ABTH16374B 16-bit D-type flip-flop; positive-edge trigger (3-State) Product specification Supersedes data of 1995 Sep 28 IC23 Data Handbook
1998 Feb 27
Philips Semiconductors Product specification 74ABT16374B 74ABTH16374B 16-bit D-type flip-flop; positive-edge trigger (3-State)
21998 Feb 27 853-1752 19027
FEATURES
- Two 8-bit positive edge triggered registers
- Live insertion/extraction permitted
- Power-up 3-State
- Power-up reset
- Multiple VCC and GND pins minimize switching noise
- 3-State output buffers
- 74ABTH16373B incorporates bus-hold data inputs which eliminate the need for external pull-up resistors to hold unused inputs
- Bus-hold data inputs eliminate the need for external pull-up resistors to hold unused inputs
- Output capability: +64mA/–32mA
- Latch-up protection exceeds 500mA per JEDEC Std 17
- ESD protection exceeds 2000V per MIL STD 883 Method 3015 and 200V per Machine Model
DESCRIPTION
The 74ABT16374B high-performance BiCMOS device combines low static and dynamic power dissipation with high speed and high output drive. The 74ABT16374B has two 8-bit, edge triggered registers, with each register coupled to eight 3-State output buffers. The two sections of each register are controlled independently by the clock (nCP) and Output Enable (nOE) control gates. Each register is fully edge triggered. The state of each D input, one set-up time before the Low-to-High clock transition, is transferred to the corresponding flip-flop’s Q output. The 3-State output buffers are designed to drive heavily loaded 3-State buses, MOS memories, or MOS microprocessors. Each active-Low Output Enable (nOE ) controls all eight 3-State buffers for its register independent of the clock operation. When nOE is Low, the stored data appears at the outputs for that register. When nOE is High, the outputs for that register are in the High-impedance “OFF” state, which means they will neither drive nor load the bus. Two options are available, 74ABT16374B which does not have the bus-hold feature and 74ABTH16374B which incorporates the bus-hold feature. QUICK REFERENCE DATA SYMBOL PARAMETER CONDITIONS Tamb = 25°C; GND = 0V TYPICAL UNIT tPLH tPHL Propagation delay nCP to nQx C L = 50pF; VCC = 5V 2.6 2.2 ns C IN Input capacitance VI = 0V or VCC 4 pF C OUT Output capacitance VO = 0V or VCC ; 3-State 7 pF ICCZ Quiescent supply current Outputs disabled; VCC = 5.5V 500 µA ICCL Quiescent su ly current Outputs Low; VCC = 5.5V 8 mA
ORDERING INFORMATION
PACKAGES TEMPERATURE RANGE OUTSIDE NORTH AMERICA NORTH AMERICA DWG NUMBER 48-Pin Plastic SSOP Type III –40°C to +85°C 74ABT16374B DL BT16374B DL SOT370-1 48-Pin Plastic TSSOP Type II –40°C to +85°C 74ABT16374B DGG BT16374B DGG SOT362-1 48-Pin Plastic SSOP Type III –40°C to +85°C 74ABTH16374B DL BH16374B DL SOT370-1 48-Pin Plastic TSSOP Type II –40°C to +85°C 74ABTH16374B DGG BH16374B DGG SOT362-1 PIN DESCRIPTION PIN NUMBER SYMBOL FUNCTION 47, 46, 44, 43, 41, 40, 38, 37 36, 35, 33, 32, 30, 29, 27, 26 1D0 – 1D7 2D0 – 2D7 Data inputs 13, 14, 16, 17, 19, 20, 22, 23 1Q0 – 1Q7 2Q0 – 2Q7 Data outputs 1, 24 1OE , 2OE Output enable inputs (active-Low) 48, 25 1CP, 2CP Clock pulse inputs (active rising edge) 4, 10, 15, 21, 28, 34, 39, 45GND Ground (0V) 7, 18, 31, 42 VCC Positive supply voltage LOGIC SYMBOL 1Q0 1Q1 1Q2 1Q3 47 46 44 43 1D0 1D1 1D2 1D3 1Q4 1Q5 1Q6 1211 1Q7 41 40 38 37 1D4 1D5 1D6 1D7 1CP 1OE 1413 17 16 36 35 33 32 2019 23 22 30 29 27 26 2Q0 2Q1 2Q2 2Q3 2D0 2D21 2D2 2D3 2Q4 2Q5 2Q6 2Q7 2D4 2D5 2D6 2D7 2CP 2OE SH00078
Philips Semiconductors Product specification 74ABT16374B 74ABTH16374B 16-bit D-type flip-flop; positive-edge trigger (3-State)
1998 Feb 27 3
LOGIC SYMBOL (IEEE/IEC) 1EN 1 ∇ 2EN 2 ∇2D SH00077 2326 1OE 1CP 2OE 2CP 1D0 1D1 1D2 1D3 1D4 1D5 1D6 1D7 2D0 2D1 2D2 2D3 2D4 2D5 2D6 2D7 1Q0 1Q1 1Q2 1Q3 1Q4 1Q5 1Q6 1Q7 2Q0 2Q1 2Q2 2Q3 2Q4 2Q5 2Q6 2Q7 PIN CONFIGURATION 1OE 1Q0 1Q1 GND 1Q2 1Q3 1Q4 1Q5 GND 1Q6 1Q7 2Q0 2Q1 GND 2Q3 VCC 2Q4 VCC 2Q2 2Q5 GND 2Q7 2OE 2Q6 1CP 1D0 1D1 GND 1D2 1D3 1D4 1D5 GND 1D6 1D7 2D0 2D1 GND 2D3 VCC 2D4 VCC 2D2 2D5 GND 2D7 2CP 2D6 SA00326 LOGIC DIAGRAM CP Q D nD0 nQ0 CP Q D nD1 CP Q D nD2 CP Q D nD3 CP Q D nD4 CP Q D nD5 CP Q D nD6 CP Q D nD7 nQ1 nQ2 nQ3 nQ4 nQ5 nQ6 nQ7 nCP nOE SA00327
Philips Semiconductors Product specification 74ABT16374B 74ABTH16374B 16-bit D-type flip-flop; positive-edge trigger (3-State)
1998 Feb 27 4
nOE nCP nDx REGISTER nQ0 – nQ7 OPERATING MODE L L l h L H L H Load and read register L ↑ X NC NC Hold H H X nDx NC nDx Z Z Disable outputs H = High voltage level h = High voltage level one set-up time prior to the High-to-Low E transition L = Low voltage level l = Low voltage level one set-up time prior to the High-to-Low E transition NC= No change X = Don’t care Z = High impedance “off” state ↑ = Low-to-High clock transition = Not a Low-to-High clock transition ABSOLUTE MAXIMUM RATINGS 1, 2 SYMBOL PARAMETER CONDITIONS RATING UNIT VCC DC supply voltage –0.5 to +7.0 V IIK DC input diode current VI < 0 –18 mA VI DC input voltage3 –1.2 to +7.0 V IOK DC output diode current VO < 0 –50 mA VOUT DC output voltage3 output in Off or High state –0.5 to +5.5 V IO DC output current output in Low state 128 mAIOUT DC output current output in High state –64 mA Tstg Storage temperature range –65 to 150 °C NOTES: 1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. 2. The performance capability of a high-performance integrated circuit in conjunction with its thermal environment can create junction temperatures which are detrimental to reliability. The maximum junction temperature of this integrated circuit should not exceed 150°C. 3. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. RECOMMENDED OPERATING CONDITIONS SYMBOL PARAMETER LIMITS UNITSYMBOL PARAMETER MIN MAX UNIT VCC DC supply voltage 4.5 5.5 V VI Input voltage 0 VCC V VIH High-level input voltage 2.0 V VIL Low-level Input voltage 0.8 V IOH High-level output current –32 mA IOL Low-level output current 64 mA Δt/Δv Input transition rise or fall rate 0 10 ns/V Tamb Operating free-air temperature range –40 +85 °C
Philips Semiconductors Product specification 74ABT16374B 74ABTH16374B 16-bit D-type flip-flop; positive-edge trigger (3-State)
1998 Feb 27 5
DC ELECTRICAL CHARACTERISTICS LIMITS SYMBOL PARAMETER TEST CONDITIONS Tamb = +25°C Tamb = –40°C to +85°C UNIT MIN TYP MAX MIN MAX VIK Input clamp voltage VCC = 4.5V; IIK = –18mA –0.9 –1.2 –1.2 V VCC = 4.5V; IOH = –3mA; VI = VIL or VIH 2.5 2.9 2.5 VOH High-level output voltageVCC = 5.0V; IOH = –3mA; VI = VIL or VIH 3.0 3.4 3.0 V VCC = 4.5V; IOH = –32mA; VI = VIL or VIH 2.0 2.4 2.0 VOL Low-level output voltageVCC = 4.5V; IOL = 64mA; VI = VIL or VIH 0.42 0.55 0.55 V VRST Power-up output voltage3 VCC = 5.5V; IO = 1mA; VI = GND or VCC 0.13 0.55 0.55 V Input leakage currentI Input leakage current VCC =55 V;V =V CC or GND 00 1 ±1 ±1 µAII g 74ABT16374B VCC = 5.5V; VI = VCC or GND 0.01 ±1 ±1 µAI 74ABT16374B CC I CC µ Input leakage current VCC = 5.5V; VI = VCC or GND Control pins ±0.01 ±1 ±1 II In ut leakage current 74ABTH16374B VCC = 5.5V; VI = VCC Data pins5 0.01 1 1 µA VCC = 5.5V; VI = 0 Data pins5 –1 –3 –5 B H ld t i t 6 VCC = 4.5V; VI = 0.8V 50 50 IHOLD Bus Hold current inputs6 74ABTH16374B VCC = 4.5V; VI = 2.0V –75 –75 µA74ABTH16374B VCC = 5.5V; VI = 0 to 5.5V ±800 IOFF Power-off leakage currentVCC = 0.0V; VO or VI ≤ 4.5V ±5.0 ±100 ±100 µA IPU/PD Power-up/down 3-State output current4 VCC = 2.1V; VO = 0.5V; VI = GND or VCC ; VOE = GND ±5.0 ±50 ±50 µA IOZH 3-State output High currentVCC = 5.5V; VO = 2.7V; VI = VIL or VIH 0.5 10 10 µA IOZL 3-State output Low currentVCC = 5.5V; VO = 0.5V; VI = VIL or VIH –0.5 –10 –10 µA ICEX Output High leakage currentVCC = 5.5V; VO = 5.5V; VI = GND or VCC 5.0 50 50 µA IO Output current1 VCC = 5.5V; VO = 2.5V –50 –70 –180 –50 –180 mA ICCH VCC = 5.5V; Outputs High, VI = GND or VCC 0.5 2 2 mA ICCL Quiescent supply currentVCC = 5.5V; Outputs Low, VI = GND or VCC 8 19 19 mA ICCZ VCC = 5.5V; Outputs 3-State; VI = GND or VCC 0.5 2 2 mA ΔICC Additional supply current per input pin2 74ABT16374B VCC = 5.5V; one input at 3.4V, other inputs at VCC or GND 5 100 100 µA ΔICC Additional supply current per input pin2 74ABTH16374B VCC = 5.5V; one input at 3.4V, other inputs at VCC or GND 0.5 1.5 1.5 mA NOTES: 1. Not more than one output should be tested at a time, and the duration of the test should not exceed one second. 2. This is the increase in supply current for each input at 3.4V. 3. For valid test results, data must not be loaded into the flip-flops (or latches) after applying the power. 4. This parameter is valid for any V CC between 0V and 2.1V with a transition time of up to 10msec. From VCC = 2.1V to VCC = 5V ± 10% a transition time of up to 100µsec is permitted. 5. Unused pins at VCC or GND. 6. This is the bus hold overdrive current required to force the input to the opposite logic state.
Philips Semiconductors Product specification 74ABT16374B 74ABTH16374B 16-bit D-type flip-flop; positive-edge trigger (3-State)
1998 Feb 27 6
GND = 0V, tR = tF = 2.5ns, CL = 50pF, RL = 500Ω LIMITS SYMBOL PARAMETER WAVEFORM Tamb = +25°C VCC = +5.0V Tamb = –40 to +85°C VCC = +5.0V ±0.5V UNIT MIN TYP MAX MIN MAX fMAX Maximum clock frequency 1 180 260 MHz tPLH tPHL Propagation delay nCP to nQx 1 1.7 1.4 2.6 2.2 4.0 3.4 1.7 1.4 4.7 3.9 ns tPZH tPZL Output enable time to High and Low level 1.3 1.3 2.4 2.3 3.7 3.4 1.3 1.3 4.7 4.6 ns tPHZ tPLZ Output disable time from High and Low level 1.9 1.7 3.1 2.6 4.6 4.0 1.9 1.7 5.5 4.4 ns AC SETUP REQUIREMENTS GND = 0V, tR = tF = 2.5ns, CL = 50pF, RL = 500Ω LIMITS SYMBOL PARAMETER WAVEFORM Tamb = +25°C VCC = +5.0V Tamb = –40 to +85°C VCC = +5.0V ±0.5V UNIT MIN TYP MIN ts(H) ts(L) Setup time, High or Low nDx to nCP 2 1.0 1.0 0.3 0.1 1.0 1.0 ns th(H) th(L) Hold time, High or Low nDx to nCP 2 1.0 1.0 –0.1 –0.3 1.0 1.0 ns tw (H) tw (L) nCP pulse width High or Low 1 2.8 2.8 1.2 1.5 2.8 2.8 ns AC WAVEFORMS VM = 1.5V, VIN = GND to 3.0V VM VM VM VM VM 1/fMAX tw (H) t w (L) tPHL tPLH nCP nQx SA00328 Waveform 1. Propagation Delay, Clock Input to Output, Clock Pulse Width, and Maximum Clock Frequency ÉÉÉ ÉÉÉ ÉÉÉÉÉÉÉÉ ÉÉÉÉÉÉÉÉ ÉÉÉ ÉÉÉ VMnDx VM VM VM VM VM nCP ts(H) t h(H) t s(L) t h(L) NOTE: The shaded areas indicate when the input is permitted to change for predictable output performance. SA00329 Waveform 2. Data Setup and Hold Times
Philips Semiconductors Product specification 74ABT16374B 74ABTH16374B 16-bit D-type flip-flop; positive-edge trigger (3-State)
1998 Feb 27 7
VOH –0.3V Waveform 3. 3-State Output Enable Time to High Level and Output Disable Time from High Level OE tPZL tPLZ nQx VM VM VM SH00080 VOL VOL + 0.3V Waveform 4. 3-State Output Enable Time to Low Level and Output Disable Time from Low Level TEST CIRCUIT AND WAVEFORM PULSE GENERATOR R T VIN D.U.T. VOUT R L VCC R L 7.0V Test Circuit for 3-State Outputs VM VM tW AMP (V) NEGATIVE PULSE 10% 10% 90% 90% VM VM tW AMP (V) POSITIVE PULSE 90% 90% 10% 10% tTHL (tF) tTLH (tR )t THL (tF) tTLH (tR ) VM = 1.5V Input Pulse Definition DEFINITIONS R L = Load resistor; see AC CHARACTERISTICS for value. C L = Load capacitance includes jig and probe capacitance; see AC CHARACTERISTICS for value. R T = Termination resistance should be equal to ZOUT of pulse generators. INPUT PULSE REQUIREMENTS FAMILY Amplitude Rep. Rate t W tR tF 74ABT/H16 3.0V 1MHz 500ns 2.5ns 2.5ns SWITCH POSITION TEST SWITCH tPLZ closed tPZL closed All other open SA00018 C L
Philips Semiconductors Product specification 74ABT16374B 74ABTH16374B Dual octal D-type flip-flop; positive-edge trigger (3-State)
1998 Feb 27 8
SSOP48: plastic shrink small outline package; 48 leads; body width 7.5 mm SOT370-1
Philips Semiconductors Product specification 74ABT16374B 74ABTH16374B Dual octal D-type flip-flop; positive-edge trigger (3-State)
1998 Feb 27 9
TSSOP48: plastic thin shrink small outline package; 48 leads; body width 6.1mm SOT362-1
Philips Semiconductors Product specification 74ABT16374B 74ABTH16374B 16-bit D-type flip-flop; positive-edge trigger (3-State) yyyy mmm dd 10 Definitions Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Disclaimers Life support — These products are not designed for use in life support appliances, devices or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes — Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Philips Semiconductors
811 East Arques Avenue
P.O. Box 3409 Sunnyvale, California 94088–3409 Telephone 800-234-7381 Copyright Philips Electronics North America Corporation 1998 All rights reserved. Printed in U.S.A. print code Date of release: 05-96 Document order number: 9397-750-03492 /C0109 /C0110 /C0114 Data sheet status Objective specification Preliminary specification Product specification Product status Development Qualification Production Definition [1] This data sheet contains the design target or goal specifications for product development. Specification may change in any manner without notice. This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make chages at any time without notice in order to improve design and supply the best possible product. This data sheet contains final specifications. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Data sheet status [1] Please consult the most recently issued datasheet before initiating or completing a design.