74ABT16373B PHILIPS
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 10
Technical content
/C0109 /C0110 /C0114 74ABT16373B 74ABTH16373B 16-bit transparent latch (3-State) Product specification Supersedes data of 1995 Aug 03 IC23 Data Handbook
1998 Feb 27
Philips Semiconductors Product specification 74ABT16373B 74ABTH16373B16-bit transparent latch (3-State)
21998 Feb 27 853-1751 19027
FEATURES
- 16-bit transparent latch
- Multiple VCC and GND pins minimize switching noise
- Power-up 3-State
- Live insertion/extraction permitted
- Power-up reset
- 3-State output buffers
- 74ABTH16373B incorporates bus-hold data inputs which eliminate the need for external pull-up resistors to hold unused inputs
- Output capability: +64mA/–32mA
- ICCL –19 mA maximum
- Latch-up protection exceeds 500mA per JEDEC Std 17
- ESD protection exceeds 2000V per MIL STD 883 Method 3015 and 200V per Machine Model
DESCRIPTION
The 74ABT16373B high-performance BiCMOS device combines low static and dynamic power dissipation with high speed and high output drive. The 74ABT16373B device is a dual octal transparent latch coupled to two sets of eight 3-State output buffers. The two sections of the device are controlled independently by Enable (nE) and Output Enable (nOE ) control gates. The data on each set of D inputs are transferred to the latch outputs when the Latch Enable (nE) input is High. The latch remains transparent to the data inputs while nE is High, and stores the data that is present one setup time before the High-to-Low enable transition. The 3-State output buffers are designed to drive heavily loaded 3-State buses, MOS memories, or MOS microprocessors. Each active-Low Output Enable (nOE ) controls eight 3-State buffers independent of the latch operation. When nOE is Low, the latched or transparent data appears at the outputs. When nOE is High, the outputs are in the High-impedance “OFF” state, which means they will neither drive nor load the bus. Two options are available, 74ABT16373B which does not have the bus-hold feature and 74ABTH16373B which incorporates the bus-hold feature. PIN CONFIGURATION 1OE 1Q0 1Q1 GND 1Q2 1Q3 1Q4 1Q5 GND 1Q6 1Q7 2Q0 2Q1 GND 2Q3 VCC 2Q4 VCC 2Q2 2Q5 GND 2Q7 2OE 2Q6 1D0 1D1 GND 1D2 1D3 1D4 1D5 GND 1D6 1D7 2D0 2D1 GND 2D3 VCC 2D4 VCC 2D2 2D5 GND 2D7 2D6 SA00379 QUICK REFERENCE DATA SYMBOL PARAMETER CONDITIONS Tamb = 25°C; GND = 0V TYPICAL UNIT tPLH tPHL Propagation delay Dn to Qn C L = 50pF; VCC = 5V 2.5 2.0 ns C IN Input capacitance VI = 0V or VCC 4 pF C OUT Output capacitance VO = 0V or VCC ; 3-State 7 pF ICCZ Quiescent supply current Outputs disabled; VCC = 5.5V 500 µA ICCL Quiescent su ly current Outputs low; VCC = 5.5V 8 mA
ORDERING INFORMATION
PACKAGES TEMPERATURE RANGE OUTSIDE NORTH AMERICA NORTH AMERICA DWG NUMBER 48-Pin SSOP type III –40°C to +85°C 74ABT16373B DL BT16373B DL SOT370-1 48-Pin TSSOP type II –40°C to +85°C 74ABT16373B DGG BT16373B DGG SOT362-1 48-Pin SSOP type III –40°C to +85°C 74ABTH16373B DL BH16373B DL SOT370-1 48-Pin TSSOP type II –40°C to +85°C 74ABTH16373B DGG BH16373B DGG SOT362-1
Philips Semiconductors Product specification 74ABT16373B 74ABTH16373B16-bit transparent latch (3-State)
1998 Feb 27 3
PIN NUMBER SYMBOL FUNCTION 30, 29, 27, 26 1D0 – 1D7 2D0 – 2D7 Data inputs 22, 23 1Q0 – 1Q7 2Q0 – 2Q7 Data outputs 1, 24 1OE , 2OE Output enable inputs (active-Low) 48, 25 1E, 2E Enable inputs (active-High) 39, 45 GND Ground (0V) 7, 18, 31, 42 VCC Positive supply voltage LOGIC SYMBOL 1Q0 1Q1 1Q2 1Q3 47 46 44 43 1D0 1D1 1D2 1D3 1Q4 1Q5 1Q6 1211 1Q7 41 40 38 37 1D4 1D5 1D6 1D7 1LE 1OE 1413 17 16 36 35 33 32 2019 23 22 30 29 27 26 2Q0 2Q1 2Q2 2Q3 2D0 2D21 2D2 2D3 2Q4 2Q5 2Q6 2Q7 2D4 2D5 2D6 2D7 2LE 2OE SA00044 LOGIC SYMBOL (IEEE/IEC) 1EN 1 ∇ 2EN 2 ∇ SA00380 1OE 2OE 1D0 1D1 1D2 1D3 1D4 1D5 1D6 2D0 2D1 2D2 2D3 2D4 2D5 2D6 2D7 1Q0 1Q1 1Q2 1Q3 1Q4 1Q5 1Q6 1Q7 2Q0 2Q1 2Q2 2Q3 2Q4 2Q7 1D7 2Q5 2Q6 LOGIC DIAGRAM E Q D nD0 nQ0 EQ D nD1 EQ D nD2 EQ D nD3 EQ D nD4 EQ D nD5 EQ D nD6 EQ D nD7 nQ1 nQ2 nQ3 nQ4 nQ5 nQ6 nQ7 nLE nOE SA00046
Philips Semiconductors Product specification 74ABT16373B 74ABTH16373B16-bit transparent latch (3-State)
1998 Feb 27 4
nOE nE nDx REGISTER nQ0 – nQ7 OPERATING MODE L L H H L H L H L H Enable and read register L L i h L H L H Latch and read register L L X NC NC Hold H H L H X Dn NC Dn Z Z Disable outputs H = High voltage level h = High voltage level one set-up time prior to the High-to-Low E transition L = Low voltage level l = Low voltage level one set-up time prior to the High-to-Low E transition NC= No change X = Don’t care Z = High impedance “off” state ↓ = High-to-Low E transition ABSOLUTE MAXIMUM RATINGS 1, 2 SYMBOL PARAMETER CONDITIONS RATING UNIT VCC DC supply voltage –0.5 to +7.0 V IIK DC input diode current VI < 0 –18 mA VI DC input voltage3 –1.2 to +7.0 V IOK DC output diode current VO < 0 –50 mA VOUT DC output voltage3 output in Off or High state –0.5 to +5.5 V IO DC output current output in Low state 128 mAIOUT DC output current output in High state –64 mA Tstg Storage temperature range –65 to 150 °C NOTES: 1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. 2. The performance capability of a high-performance integrated circuit in conjunction with its thermal environment can create junction temperatures which are detrimental to reliability. The maximum junction temperature of this integrated circuit should not exceed 150°C. 3. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. RECOMMENDED OPERATING CONDITIONS SYMBOL PARAMETER LIMITS UNITSYMBOL PARAMETER MIN MAX UNIT VCC DC supply voltage 4.5 5.5 V VI Input voltage 0 VCC V VIH High-level input voltage 2.0 V VIL Low-level Input voltage 0.8 V IOH High-level output current –32 mA IOL Low-level output current 64 mA Δt/Δv Input transition rise or fall rate 0 10 ns/V Tamb Operating free-air temperature range –40 +85 °C
Philips Semiconductors Product specification 74ABT16373B 74ABTH16373B16-bit transparent latch (3-State)
1998 Feb 27 5
DC ELECTRICAL CHARACTERISTICS LIMITS SYMBOL PARAMETER TEST CONDITIONS Tamb = +25°C Tamb = –40°C to +85°C UNIT MIN TYP MAX MIN MAX VIK Input clamp voltage VCC = 4.5V; IIK = –18mA –0.9 –1.2 –1.2 V VCC = 4.5V; IOH = –3mA; VI = VIL or VIH 2.5 2.9 2.5 V VOH High-level output voltageVCC = 5.0V; IOH = –3mA; VI = VIL or VIH 3.0 3.4 3.0 V VCC = 4.5V; IOH = –32mA; VI = VIL or VIH 2.0 2.4 2.0 V VOL Low-level output voltageVCC = 4.5V; IOL = 64mA; VI = VIL or VIH 0.42 0.55 0.55 V VRST Power-up output voltage3 VCC = 5.5V; IO = 1mA; VI = GND or VCC 0.13 0.55 0.55 V I Input leakage current VCC =55 V;V =V CC or GND ±00 1 ±1 ±1 µAII g 74ABT16373B VCC = 5.5V; VI = VCC or GND ±0.01 ±1 ±1 µA VCC = 5.5V; VI = VCC or GND Control pins ±0.01 ±1 ±1 µA II Input leakage current 74ABTH16373B VCC = 5.5V; VI = VCC Data pins5 0.01 1 1 µA74ABTH16373B VCC = 5.5V; VI = 0 Data pins5 –1 –3 –5 µA VCC = 4.5V; VI = 0.8V 50 50 IHOLD Bus Hold current A inputs6 74ABTH16373B VCC = 4.5V; VI = 2.0V –75 –75 µA74ABTH16373B VCC = 5.5V; VI = 0 to 5.5V ±800 IOFF Power-off leakage currentVCC = 0.0V; VO or VI ≤ 4.5V ±5.0 ±100 ±100 µA IPU /IPD Power-up/down 3-State output current4 VCC = 2.1V; VO = 0.5V; VI = GND or VCC ; VOE = GND ±5.0 ±50 ±50 µA IOZH 3-State output High currentVCC = 5.5V; VO = 5.5V; VI = VIL or VIH 0.5 10 10 µA IOZL 3-State output Low currentVCC = 5.5V; VO = 0.0V; VI = VIL or VIH –0.5 –10 –10 µA IO Output current1 VCC = 5.5V; VO = 2.5V –50 –70 –180 –50 –180 mA ICEX Output High leakage current VCC = 5.5V; VO = 5.5V; VI = GND or VCC 0.1 50 50 µA ICCH VCC = 5.5V; Outputs High, VI = GND or VCC 0.5 2 2 mA ICCL Quiescent supply currentVCC = 5.5V; Outputs Low, VI = GND or VCC 8 19 19 mA ICCZ VCC = 5.5V; Outputs 3-State; VI = GND or VCC 0.5 2 2 mA ΔICC Additional supply current per input pin2 74ABT16373B VCC = 5.5V; one input at 3.4V, other inputs at VCC or GND 5 100 100 µA ΔICC Additional supply current per input pin2 74ABTH16373B VCC = 5.5V; one input at 3.4V, other inputs at VCC or GND 0.5 1.5 1.5 mA NOTES: 1. Not more than one output should be tested at a time, and the duration of the test should not exceed one second. 2. This is the increase in supply current for each input at 3.4V. 3. For valid test results, data must not be loaded into the flip-flops (or latches) after applying the power. 4. This parameter is valid for any V CC between 0V and 2.1V, with a transition time of up to 10msec. From VCC = 2.1 to VCC = 5V ± 10% a transition time of up to 100µsec is permitted. 5. Unused pins at VCC or GND. 6. This is the bus hold overdrive current required to force the input to the opposite logic state.
Philips Semiconductors Product specification 74ABT16373B 74ABTH16373B16-bit transparent latch (3-State)
1998 Feb 27 6
GND = 0V, tR = tF = 2.5ns, CL = 50pF, RL = 500Ω LIMITS SYMBOL PARAMETER WAVEFORM Tamb = +25°C VCC = +5.0V Tamb = –40 to +85°C VCC = +5.0V ±0.5V UNIT MIN TYP MAX MIN MAX tPLH tPHL Propagation delay nDx to nQx 2 1.5 1.1 2.5 2.0 3.8 3.1 1.5 1.1 4.4 3.8 ns tPLH tPHL Propagation delay nE to nQx 1 1.6 1.3 2.5 2.1 3.8 3.1 1.6 1.3 4.4 3.6 ns tPZH tPZL Output enable time to High and Low level 1.2 1.3 2.3 2.3 3.5 3.5 1.2 1.3 4.6 4.5 ns tPHZ tPLZ Output disable time from High and Low level 1.9 1.7 3.1 2.6 4.5 3.8 1.9 1.7 5.3 4.2 ns AC SETUP REQUIREMENTS GND = 0V, tR = tF = 2.5ns, CL = 50pF, RL = 500Ω LIMITS SYMBOL PARAMETER WAVEFORM Tamb = +25°C VCC = +5.0V Tamb = –40 to +85°C VCC = +5.0V ±0.5V UNIT MIN TYP MIN ts(H) ts(L) Setup time, High or Low nDx to nE 3 1.0 1.0 0.0 0.3 1.0 1.0 ns th(H) th(L) Hold time, High or Low nDx to nE 3 0.5 0.5 –0.2 0.0 0.5 0.5 ns tw (H) Enable pulse width High 1 2.5 1.0 2.5 ns AC WAVEFORMS For all waveforms, VM = 1.5V. tw (H) tPHL tPLH nE nQx SA00047 VM VM VM VM VM Waveform 1. Propagation Delay, Enable to Output, and Enable Pulse Width nDx VM tPLH tPHL nQx VM VM VM SA00048 Waveform 2. Propagation Delay for Data to Outputs
Philips Semiconductors Product specification 74ABT16373B 74ABTH16373B16-bit transparent latch (3-State)
1998 Feb 27 7
NOTE: The shaded areas indicate when the input is per- mitted to change for predictable output performance. ÉÉÉ ÉÉÉ ÉÉÉ ÉÉÉÉÉÉÉÉ ÉÉÉÉÉÉÉÉ ÉÉÉÉÉÉÉÉ ÉÉÉ ÉÉÉ ÉÉÉ VMnDx VM VM VM VM nE ts(H) th(H) ts(L) th(L) SA00049 VM Waveform 3. Data Setup and Hold Times nOE VM tPZH tPHZ nQx VM VM SA00050 VOH VOH – 0.3V Waveform 4. 3-State Output Enable Time to High Level and Output Disable Time from High Level nOE tPZL tPLZ nQx VM VM VM SA00051 VOL + 0.3V VOL Waveform 5. 3-State Output Enable Time to Low Level and Output Disable Time from Low Level TEST CIRCUIT AND WAVEFORM PULSE GENERATOR R T VIN D.U.T. VOUT R L VCC R L 7.0V Test Circuit for 3-State Outputs VM VM tW AMP (V) NEGATIVE PULSE 10% 10% 90% 90% VM VM tW AMP (V) POSITIVE PULSE 90% 90% 10% 10% tTHL (tF) tTLH (tR )t THL (tF) tTLH (tR ) VM = 1.5V Input Pulse Definition DEFINITIONS R L = Load resistor; see AC CHARACTERISTICS for value. C L = Load capacitance includes jig and probe capacitance; see AC CHARACTERISTICS for value. R T = Termination resistance should be equal to ZOUT of pulse generators. INPUT PULSE REQUIREMENTS FAMILY Amplitude Rep. Rate t W tR tF 74ABT/H16 3.0V 1MHz 500ns 2.5ns 2.5ns SWITCH POSITION TEST SWITCH tPLZ closed tPZL closed All other open SA00018 C L
Philips Semiconductors Product specification 74ABT16373B 74ABTH16373B16-bit transparent latch (3-State)
1998 Feb 27 8
SSOP48: plastic shrink small outline package; 48 leads; body width 7.5 mm SOT370-1
Philips Semiconductors Product specification 74ABT16373B 74ABTH16373B16-bit transparent latch (3-State)
1998 Feb 27 9
TSSOP48: plastic thin shrink small outline package; 48 leads; body width 6.1mm SOT362-1
Philips Semiconductors Product specification 74ABT16373B 74ABTH16373B16-bit transparent latch (3-State) yyyy mmm dd 10 Definitions Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Disclaimers Life support — These products are not designed for use in life support appliances, devices or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes — Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Philips Semiconductors
811 East Arques Avenue
P.O. Box 3409 Sunnyvale, California 94088–3409 Telephone 800-234-7381 Copyright Philips Electronics North America Corporation 1998 All rights reserved. Printed in U.S.A. print code Date of release: 05-96 Document order number: 9397-750-03491 /C0109 /C0110 /C0114 Data sheet status Objective specification Preliminary specification Product specification Product status Development Qualification Production Definition [1] This data sheet contains the design target or goal specifications for product development. Specification may change in any manner without notice. This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make chages at any time without notice in order to improve design and supply the best possible product. This data sheet contains final specifications. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Data sheet status [1] Please consult the most recently issued datasheet before initiating or completing a design.