744821240 WURTH
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 1
Technical content
Bezeichnung : description : XS A 15 max. mm B 7,5 max. mm C 10,0 ± 0,5 mm D 4,5 ± 0,5 mm E 18 max. mm F 2,5 ± 0,5 mm G 0,7 ref. mm Eigenschaften / properties Wert / value Einheit / unit tol. Leerlauf-Induktivität / inductance DC-Widerstand / DC-resistance Nennstrom / nominal current Nennspannung/ nominal voltage 33% +25°C
1500 V, 50 Hz
5mA, 2 sec. MST Version 1 04-10-11 Name Änderung / modification Datum / date Würth Elektronik UL94V-2 Abstandhalter / spacer: Freigabe erteilt / general release: Kunde / customer UL94V-0 Kleber / glue: It is recommended that the temperature of the part does C Lötpad / soldering spec.: B Elektrische Eigenschaften / electrical properties: F Werkstoffe & Zulassungen / material & approvals G Eigenschaften / general specifications: D Prüfgeräte / test equipment: IDC max. ±30% http://www.we-online.com Datum / date Unterschrift / signature Kontrolliert / approved Würth Elektronik eiSos GmbH & Co. KG D-74638 Waldenburg · Max-Eyth-Strasse 1 -3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400 Geprüft / checked 2UEWF (155°C) Betriebstemp. / operating temperature: -40°C - + 125°C Spezifikation für Freigabe / specification for release DATUM / DATE : 2004-10-11 max. VAC Testbedingungen / test conditions 250 mΩ 1,5 Kunde / customer : STROMKOMP. DROSSEL WE-CMB COMMON MODE CHOKE WE-CMB Artikelnummer / part number : 744821240 A Mechanische Abmessungen / dimensions: 1 kHz / 50µA @ 25°C mHLO 4,0 RDC 140,0 Übertemperatur / temperature rise: < 55 K A FLUKE PM 6306 für/for L0/LN UN E Testbedingungen / test conditions: typ. Luftfeuchtigkeit / humidity: not exceed 125°C under worst case operating conditions. HP 34401 A für/for IN und/and RDC Klimabeständigkeit/ climatic class: 40/125/21Sockel / base: UL94V-0 Draht / wire: Umgebungstemperatur / temperature: Prüfspannung / testing voltage D C E F BA G RoHS compliant LF This electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body. In addition, even electronic component in general electronic equipments, when used in electrical circuits that require high safety, reliability functions or performance, the sufficient reliability evaluation-check for the safety must be performed before use. It is essential to give consideration when to install a protective circuit at the design stage. SEITE 1 VON 1