744224 WURTH
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 2
Technical content
Bezeichnung : description : A 9,2 ± 0,3 mm B 6,0 ± 0,3 mm C 5,0 ± 0,2 mm D 2,0 ref. mm E 2,54 ± 0,2 mm F 5,7 ref. mm G 1,4 ref. mm H 1,0 ± 0,1 @@FRM 1@@ Eigenschaften / properties Wert / value Einheit / unit tol. Induktivität / inductance Nennspannung/ rated voltage DC-Widerstand / DC-resistance Nennstrom / rated curren t Impedanz / impedance 33% +20°C Betriebstemp. / operating temperature: -40°C - + 125°C Umgebungstemp. / ambient temperature: -40°C - + 85°C It is recommended that the temperature of the part does not exceed 125°C under worst case operating conditions. Spannungsfestigkeit / High-Pot Test:(60Hz 3mA 3sec.) 500 VAC MST Version 5 2004-10-11 MST Version 4 2004-03-29 AG Version 3 2003-04-15 MST Version 2 2003-03-04 MST Version 1 2002-04-17 Name Änderung / modification Datum / date Ω HP 4274 A für/for L und/and Q L1-4;2-3 250 IDC UDC 80 Ω Luftfeuchtigkeit / humidity: Kunde / customer : 744224 STROMKOMP. SMD LINE FILTER WE-SL2 COMMON MODE SMD LINE FILTER WE-SL2 Artikelnummer / part number : µH RDC 5mV / 100 KHz Spezifikation für Freigabe / specification for release DATUM / DATE : 2004-10-11 max. A Testbedingungen / test conditions 1,20 max. V 0,13 ± 50% http://www.we-online.com Datum / date Unterschrift / signature Kontrolliert / approved Würth Elektronik eiSos GmbH & Co. KG D-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400 Geprüft / checked C Lötpad / soldering spec. : B Elektrische Eigenschaften / electrical properties : Basismaterial / base material: max.Z 1800 HP 34401 A für/for IDC und/and RDC Draht / wire: Gehäuse / Housing: UL94-V0 A Mechanische Abmessungen / dimensions : Ferrit / ferrite Class F F Werkstoffe & Zulassungen / material & approvals : G Eigenschaften / granted properties : D Prüfgeräte / test equipment : E Testbedingungen / test conditions : Umgebungstemperatur / temperature: Freigabe erteilt / general release: Kunde / customer Würth Elektronik 2,54 2,0 9,5 1,2 Ee D H BC A 2 1 F G = = = = = WE RoHS compliant LF SEITE 1 VON 2
Bezeichnung : description : MST Version 5 04-10-11 MST Version 4 2004-03-29 AG Version 3 2003-04-15 MST Version 2 2003-03-04 MST Version 1 2002-04-17 Name Änderung / modification Datum / date Spezifikation für Freigabe / specification for release Kunde / customer : Artikelnummer / part number : 744224 STROMKOMP. SMD LINE FILTER WE-SL2 COMMON MODE SMD LINE FILTER WE-SL2 DATUM / DATE : 2004-10-11 H Impedanzverlauf / impedance curve : Freigabe erteilt / general release: Kunde / customer Datum / date Unterschrift / signature Würth Elektronik Würth Elektronik eiSos GmbH & Co. KG D-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400 http://www.we-online.com Geprüft / checked Kontrolliert / approved = = = = = common mode = = = = = differential mode 100 1000 10000 0,1 1 10 100 Frequenz / frequency [MHz] Impedanz / impedance [Ohm] Z (com) Z (dif) IF BW 10kHz POWER 0 dBm SWP 134,5 msec START 1 MHz STOP 100 MHz This electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body. In addition, even electronic component in general electronic equipments, when used in electrical circuits that require high safety, reliability functions or performance, the sufficient reliability evaluation-check for the safety must be performed before use. It is essential to give consideration when to install a protective circuit at the design stage. SEITE 2 VON 2