6MBP15RH060 ETC

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 5

Technical content

DC bus voltage (Surge) DC bus voltage (Short operating) Collector-Emitter voltage Collector current DC 1ms Duty=44.1% Collector power dissipation One transistor Junction temperature Input voltage of power supply for pre-driver Input signal voltage Input singal current Alarm signal voltage Alarm signal current Storage temperature Operating case temperature Isolating voltage (Terminal to base, 50/60Hz sine wave 1min.) Screw torque 6MBP15RH060 IGBT Modules IGBT-IPM R series600V / 15A / 6 in one-package l Absolute maximum ratings (Tc=25˚C unless otherwise specified) n Features

  • Low power loss and soft switching
  • High performance and high reliability IGBT with overheating protection
  • Higher reliability because of a big decrease in number of parts in built-in control circuit n Applications
  • Inverter for motor drive
  • AC and DC servo drive amplifier
  • UPS (Uninterruptible power supply) n Maximum ratings and characteristics Item Symbol Rating Unit VDC VDC (surge) VSC VCES IC ICP –IC PC Tj VCC Vin Iin VALM IALM Tstg Tcop Viso Mounting (M4) 450 500 400 600 150 –0.3 to 20 Vz Vcc –40 to 125 –20 to 100 AC 2500 2.0 V V V V A A A W V V mA V mA V N • m l Electrical characteristics of power circuit (Tc=Tj=25˚C, Vcc=15V) Symbol ICES VCE (sat) VF Condition V CE =600V, Vin open Ic=15A –Ic=15A Min. Max. 1.0 2.7 3.5 Unit mA V V Typ. Item Collector current at off signal input Collector-Emitter saturation voltage Forward voltage of FWD

Min. 0.5 Symbol t on toff trr Unit ms ms ms IGBT Modules6MBP15RH060 l Switching characteristics (Tc=Tj=25˚C, Vcc=15V) Item Condition Ic=15A, VDC =300V Inductive-Load Max. 3.5 0.5 Typ. Switching time (IGBT) See Fig. 3 Switching time (FWD) Fig.1 Definition of OC delay time Fig.2 Definition of tsc Fig.3 Definition of switching time DC bus voltage Operating power supply voltage range of pre-drive Switching frequency Flatness of heat sink Mounting screw torque (M4) Junction to case thermal resistance Case to fin thermal resistance with compound Item Symbol Rth (j-c) Rth (j-c) Rth (c-f) Max. 3.1 5.4 Unit ˚C/W ˚C/W ˚C/W Typ. 0.05 l Thermal characteristics (Tc=Tj=25˚C, Vcc=15V) IGBT FWD Symbol V DC VCC fsw Item Unit V V kHz mm N • m Typ. Min. 200 13.5 –100 1.3 Max. 400 16.5 100 1.7 l Recommendable value Min. Power supply current of P-line pre-driver (one unit) Power supply current of N-line pre-driver Input signal threshold voltage Input zener voltage IGBT chips overheat protection temperature level Hysteresis Collector current protection level OC detecting resistance value Protection delay time Undervoltage protection level Hysteresis Alarm signal hold time mA mA V V V A mV m ms V V ms 1.00 1.25 150 190 11.0 0.2 1.0 2.0 4.0 1.35 1.60 8.0 200 7.5 5.0 2.0 5.0 10.0 1.70 1.95 210 7.0 12.5 0.8 l Electrical characteristics of control circuit (Tc=Tj=25˚C, Vcc=15V) Item Symbol Condition Min. Typ. Max. Unit ICCP ICCN VIn (th) VZ TjoH TjH IOC VOC R OC tDOC VUV VH tALM Vin=H Vin=H Turn-on Turn-off R in=20k Surface of IGBT N-side, (N1-N2 open) Between N1 and N2 Tj=25˚C Fig. 1, Fig. 2

64–1 50.8–0.8 60–0.3 57.6–0.8 16.5–0.8 31.5–0.8 2-ø4.5–0.346.5–1 10–0.5 0.6 16.5–0.5 70–1 2–0.12–0.1 P 11 0 1 5 47 UV W N 1 N 2 2.542.54 4.1 0.3 7.62 7.62 7.62 Shows theory dimensions 0.6 n Block diagram IGBT Modules6MBP15RH060 n Outline drawings, mm Pre-driver 1 includes following functions. (P-side)

  • Amplifier for drive
  • Power supply undervoltage protection
  • IGBT chip overheating protection Pre-driver 2 includes following functions. (N-side)
  • Amplifier for drive
  • Power supply undervoltage protection
  • IGBT chip overheating protection
  • Overcurrent protection
  • Alarm signal output Mass : 50g

n Characteristics (Representative) Collector current vs. Collector-emitter voltage Collector current vs. Collector-emitter voltage Switching losses vs. Collector current Switching losses vs. Collector current Switching time vs. Collector current Switching time vs. Collector current

Forward voltage vs. Forward current Forward voltage vs. Forward current Transient thermal resistance Power supply current vs. Switching frequency Overcurrent protection vs. Case temperature