Download PDF6A05 SSC
Document overview
- PDF pages: 3
Technical content
Page 1
General Purpose Plastic Rectifiers
PRODUCT SUMMARY
Reverse Voltage 50 to 1000 Volts Forward Current 6.0 Amperes
FEATURES
Low forward voltage drop High current capability High reliability High surge current capability TJ is 150oC (Max.) and TSTG is 175oC (Max.) with PI glue
MECANICAL DATA
Cases: Molded plastic R-6 Epoxy: UL 94V-O rate flame retardant Lead: Axial leads, solderable per MIL-STD-202, Method 208 guaranteed Polarity: Color band denotes cathode end High temperature soldering guaranteed: 250oC/10 seconds .375" (9.5mm) lead lengths at 5 lbs., (2.3kg) tension Weight: 0.074 ounce, 2.1 grams
Pb-free; RoHS-compliant
02/15/2008 Rev.1.00 www.SiliconStandard.com 1
Page 2
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
o
Ratings at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%
Notes: 1. Measured at 1 MHz and Applied Reverse Voltage of 4.0 V D.C. 2. Thermal Resistance from Junction to Ambient .375” (9.5mm) Lead Length
02/15/2008 Rev.1.00 www.SiliconStandard.com 2
Page 3
RATINGS AND CHARACTERISTIC CURVES
(TA=25oC unless otherwise noted)
Information furnished by Silicon Standard Corporation is believed to be accurate and reliable. However, Silicon Standard Corporation makes no guarantee or warranty, expressed or implied, as to the reliability, accuracy, timeliness or completeness of such information and assumes no responsibility for its use, or for infringement of any patent or other intellectual property rights of third parties that may result from its use. Silicon Standard reserves the right to make changes as it deems necessary to any products described herein for any reason, including without limitation enhancement in reliability, functionality or design. No license is granted, whether expressly or by implication, in relation to
the use of any products described herein or to the use of any information provided herein, under any patent or other intellectual property rights of Silicon Standard Corporation or any third parties.
02/15/2008 Rev.1.00 www.SiliconStandard.com 3