68000 COOPER

Document overview

  • PDF pages: 1

Technical content

Page 1

Bussmann®

PDF page 1 diagram
PDF page 1 diagram

Catalog Symbol: 68150, 68200, 68300, 68400, 68600, 64200, 64300, 64400, and 64600 Welder Limiters Voltage Rating: 600 Volts AC or less; 200,000 AIC

Type Catalog Amp Rating

Fuseholder Number

(Nominal)

A B C D

68150

150 9.63 — — 1.5

68200

200

Class H 68300

300 11.63 — — 2.0

68400

400

68600

600 13.38 — — 2.5

64200

200 5.75 3.0 4.38 1.5

64300

300 7.125 3.38 5.25 2.0

Class J 64400

400 7.125 3.38 5.25 2.0

64600

600 8.0 3.75 6.0 2.5 General Information:

  • Current-limiting devices designed specially for use on welder circuits only.
  • Time-current characteristics are designed to hold on the inter- mittent overloading encountered in welder operation, while pro- viding short-circuit protection to the circuit and equipment.
  • Welder limiters have excess current capacity in the operating range as needed for this type of service.
  • Because of the special characteristics of the welder limiters, they are not intended for application on general-use circuits.

Dimensional Data

PDF page 1 diagram

Dimensions in Inches

Carton

Weight

E F G H J K Qty. Lbs. Kg.

3.31 — 1.25 0.19

— — 1 1.40 0.63

4.31 — 1.63 0.25

— — 1 2.75 1.25

5.16 — 2.0 0.25 — — 1 4.25 1.92

1.38 0.69 1.125 0.19

0.28 0.38 1 1.00 0.45

1.88 0.94 1.63 0.25

0.41 0.53 1 1.75 0.79

1.88 0.94 1.63 0.25

0.41 0.53 1 1.75 0.79

2.125 1.0

2.0 0.38 0.53 0.34 1 3.50 1.59

The only controlled copy of this BIF document is the electronic read-only version located on the Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications.

Form No. Welder Limiter

12-28-98

Page 1 of 1 BIF Doc #1045

SB98107 Rev. A