Download PDF66400 MICROPAC
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 2
Technical content
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION · 725 E.Walnut St., Garland, TX 75040 · (972)272-3571 · Fax (972)487-6918 www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM
66400 MICROCOUPLER, PHOTODARLINGTON OUTPUT
Features:
- Photodarlington output
- Small size saves real estate
- Large thick film gold bond pads
- Element evaluation on request
- Electrically similar to 6N140 Applications:
- Eliminate ground loops
- Level shifting
- Line receiver
- Solid state switching
- Switching power supplies
DESCRIPTION
The 66400 microcoupler is a single channel optocoupler consisting of an LED optically coupled to a light sensitive photodarlington transistor. Each microcoupler is provided with full 100% DC testing (+125°C test option upon request) or 100% element evaluation. All microcouplers are capable of operating over the full military temperature range. Package Dimensions Schematic Diagram SHIELD ANODE 1 3 GND CATHODE 6 5 VCC
4 VOUT
0.100 0.110 0.050 0.030 0.092 0.055 MAX. ALL DIMENSIONS ARE IN INCHES. 0.015 DEVICE TYPE IDENTIFIER DOT (COLOR CODE - YELLOW)
ELECTRICAL CHARACTERISTICS
TA = -55°C to 125°C unless otherwise specified. PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDITIONS NOTE 300 IF = 0.5mA, VO = 0.4V, VCC = 4.5V 300 IF = 1.6mA, VO = 0.4V, VCC = 4.5V Current Transfer Ratio CTR 200 IF = 5.0mA, VO = 0.4V, VCC = 4.5V Logic Low Output Voltage VOL 0.2 0.4 V IF = 5.0mA, IOL = 10mA, VCC =4.5V Logic High Output Current IOH 0.005 250 µA IF = 2.0µA, VO = 18.0V, VCC = 18.0V Logic High Supply Current ICCH 0.01 40 µA IF = 0mA, VCC = 18V Low Level Supply Current ICCL 0.8 2 mA IF = 1.6mA, VCC = 18V Input Forward Voltage VF 0.9 1.7 V IF = 2.0mA Input Reverse Current IR 10 µA VR = 5.0V Input-Output Insulation Leakage Current II— O 1.0 µA VI— 0 = 1500VDC, R.H. < 50% TA = 25°C 2 5 60 IF = 0.5mA (pulsed), VCC = 5.0V, RL = 4.7KΩ , Cbypass = 0.1µF Propagation Delay Time To High Output Level TPLH 10 30 µs IF = 5.0mA (pulsed), VCC = 5.0V, RL = 680Ω , Cbypass = 0.1µF Figure 1 8 100 IF = 0.5mA (pulsed), VCC = 5.0V, RL = 4.7KΩ , Cbypass = 0.1µF Propagation Delay Time To Low Output Level TPHL 2 10 µs IF = 5.0mA (pulsed), VCC = 5.0V, RL = 680Ω , Cbypass = 0.1µF Figure 1 1. Current Transfer Ratio is defined as the ratio of output collector current, IO, to the forward LED input current., IF , times 100%. 2. Measurement between pins 1 and 6 shorted together and pins 2, 3, 4, and 5 shorted together for duration of 1 second. 3. Pulsed at F = 10KHz, 50% Duty Cycle and Amplitude adjusted for indicated forward LED current through IF monitor resistor.
1.5 V VOL
Figure 1. Switching Test Circuit