660 ETC
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
- Case : melamine/polyester
- Actuator : brass, nickel plated
- Bushing : brass, nickel plated
- Contacts silver
- Panel thickness : 4.5 mm (.177) max.
- Operating temperature : -20 °C to +55 °C (-4 °F to +131 °F) GENERAL SPECIFICATIONS
- Max. current/voltage rating with resistive load : 10 A 30 VDC
- Decrease by 50 % for inductive load
- Initial contact resistance : 10 mΩ max.
- Insulation resistance : 1,000 MΩ min. at 500 VDC
- Dielectric strength : 2,500 Vrms 50 Hz min. between terminals 2,500 Vrms 50 Hz min. between terminals and frame
- Electrical life : 10,000 cycles at full load ELECTRICAL SPECIFICATIONS Four pole models High current/voltage rating Screw terminals DISTINCTIVE FEATURES 660 series Power toggle switches • metal lever The company reserves the right to change specifications without notice. MATERIALS PANEL SWITCHES SW-660-1711
Power toggle switches • metal lever 660 series TERMINALS Screw ( standard) (.25)□ 6.35□ 8.00□ 0.80□ ¯3.00x0.50 SI□ (.118DIAx0.50 IS)□ (.031)□ (.314)□ ELECTRICAL FUNCTIONS KEYWAY 2□3□ 1□ PANEL CUT-OUT (.20)□ (.066)□ (.48DIA)□ 1.70□ ¯12.20□ 5.10□ (.377)□ ¯12.50□ (.492DIA)□ (.137DIA)□ ¯3.50□ 9.60□ ¯12.20□ (.48DIA)□ (.20)□ (.066)□ (.48DIA)□ 1.70□ ¯12.20□ 5.10□ (.377)□ ¯12.50□ (.492DIA)□ (.137DIA)□ ¯3.50□ 9.60□ ¯12.20□ (.48DIA)□ PANEL SWITCHES
Mounting accessories : Standard hardware supplied with all models: 1 hex nut U166, 1 knurled nut U411 and 1 lockwasher U13. Standard and special hardware is presented in the "Accessories" section of website.. On the following page, you will find successively basic part numbers of switches and options. Power toggle switches • metal lever 660 series ABOUT THIS SERIES BASIC PART NUMBER SERIES
6 Four pole
1 ON - OFF
4 ON ON ON
5 MOM - ON
6 ON - ON
7 MOM OFF MOM
8 ON OFF MOM
9 ON OFF ON
BLANK Screw terminals (standard) /2 Solder lug terminals /3 Quick-connect terminals OTHER OPTIONS T Tropicalized case LUXE Chrome finish TK LUXE Front panel sealing + T and LUXE G Black finish GK Black finish + front panel sealing PANEL SWITCHES
6.50□ ¯2.50□ (.098DIA)□ (.255)□ (.098)□ 2.50□ (.196DIA)□ ¯5.00□ (.25x.031)□ (.354)□ 6.35x0.80□ 9.00□ 1185 107 129 C60DT4-1 Echelle 0.6 Serie 600 (.433) (1.378) (.118DIAx0.5 IS) (.472DIAx0.75 IS) A 35.00 11.00 11.00 11.00 (.433) (.433) Ø3.00x0.50 SI Ø12.00x0.75 SI I II III FOUR POLE KEYWAY III 2-1* II I 2-3** BASIC P/N A 661 20° ON - OFF 664 * 28° ON ON ON 665 20° MOM - ON 666 20° ON - ON 667 20° MOM OFF MOM 668 20° ON OFF MOM 669 28° ON OFF ON A = Angle of throw Blank Screw terminals (standard) /2 Solder lug terminals /3 Quick-connect terminals 6.35 x 0.8 (.250 x .031) TERMINAL OPTIONS BASIC P/N /2 /3 BASIC P/N LOCKING LEVERS T Tropicalized diallylphthalate case (-40 °C to +85 °C) (-40 °F to +185 °F) LUXE Chrome plated lever and cap nut U117 TK LUXE Options T and LUXE + front panel sealing by O-ring and sealing washer. See 600H series. G Black finish on bushing, lever and nuts. Includes tropicalization (option T). GK Option G + front panel sealing by O-ring and sealing washer. Power toggle switches • metal lever 660 series * See "Technical information" on website. PANEL SWITCHES