602W2CPXX59S40X CONEC

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(free datasheet download site)
  • PDF pages: 2

Technical content

dim. in mm RR RR date drawn THIS DRAW ING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH d-old norm appd. tolerance material: title: dwg no: DIN- sh: part no: namedate namedescriptionrev.DO NOT ALTER CAD DRAWING BY HAND scale: 15K1A1213 D-SUB COMBINATION MALE SEE NOTES Henneboel09.11.12

09.11.12 Koch

with threaded insert, metal bracket, snap and hexlocking screw 2:1 (5:1) 602W2CPXX59S40X a Original 602W2CPXX59S40X CONEC ABC Directive 2002/95/EC RoHS compliant 16,84-0,05 0,2+ 39,4-0 0,3+ 21,1 -00,3 SEE NOTE 15 SEE NOTE 10 O-RING 4,8SW 8,26-0,23 0,02+ 5,93 0,3 3,6 -00,25 ( 5 : 1 ) SEALING COMPOUND 5,7 -0,18 0,12 AT ALL TIMES WATER RESISTANT CONNECTORS NOT IN USE SHOULD BE COVERED WITH A CONEC WATER RESISTANT CAP OR WATER TIGHT HOOD. 10° 4-40 UNC 3,2\ 0,2 10,5\ 0,3 6,35\` 0,3 1,9 Ø (2x) m ax. 2 25 -0,13 0,12+ 4-40 UNC 5,65 0,2 9,9 0,2 PCB-SNAP PRESS FOR FIXING ON PCB METAL BRACKET NOTES: 1. FOR WAVESOLDERING (SOLDER BATH TEMPERATURE 240 ° C FOR 5 SEC. AND SOLDER PREHEAT 120° C FOR 120 SEC.) 2. METALSHELLS: COPPER ALLOY; min. 315µin TIN over 40-80µin NICKEL 3. INSULATOR: PBT GF UL 94 V-0, GREEN 4. HIGH POWER CONTACTS 15A: COPPER ALLOY PLATING MATING AREA: GOLD FLASH over NICKEL PLATING TERMINATION SIDE: 160-240µin TIN over 80µin NICKEL 5. METAL BRACKETS: ZINC DIE CAST; 300µin COPPER/40-120µin NICKEL/120-200µin TIN 6. THREADED INSERTS: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL 7. COLLARS: COPPER ALLOY; NICKEL PLATED 8. PCB-SNAP: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL PCB-HOLE: Ø3,1±0,1mm; PCB THICKNESS 1,6mm 9. HEXLOCKING SCREWS: STAINLESS STEEL 10. FRAME: ZINC DIE CAST; NICKEL PLATED 11. O-RING: SILICON; BLUE 12. SEALING COMPOUND: PUR; BLUE 13. P.C.B. HOLE DRILLINGS and RECOMMENDED PANEL CUT-OUT ON SHEET 2 14. RECOMMENDED TORQUE FOR MOUNTING SCREW 15. CONNECTOR IS PART MARKED: 602W2CPXX59S40X CONEC ABC

dim. in mm RR RR date drawn THIS DRAW ING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH d-old norm appd. tolerance material: title: dwg no: DIN- sh: part no: namedate namedescriptionrev.DO NOT ALTER CAD DRAWING BY HAND scale: 15K1A1213 PANEL CUT-OUT SEE SHEET 1 Henneboel09.11.12 with threaded insert, metal bracket, snap and hexlocking screw 3:1 SEE SHEET 1 a Original 20,5\ 0,1 11,4 0,1 10°\ 1° 3,1 0,05 Ø (2x) 25\ 0,1 B A i 0,26B i 0,26A RECOMMENDED PANEL CUT OUT 3,4R \ 0,13 3,35 3,63 0,1 3,43\` 0,1 25 -0,12 0,13+ 9,25 P.C.B. EDGE FRONTPANEL P.C.B. HOLE DRILLINGS ( P.C.B. TOP SIDE )