6025W3PAT59S20X CONEC
Document overview
- Manufacturer or author: Provided By www.digicamel.com(free datasheet download site)
- PDF pages: 1
Technical content
dim. in mm RR RR date drawn THIS DRAW ING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH d-old norm appd. tolerance material: title: dwg no: DIN- sh: part no: namedate namedescriptionrev.DO NOT ALTER CAD DRAWING BY HAND scale: 15K1A1586 D-SUB COMBINATION MALE 90° SEE NOTES Henneboel08.12.14
08.12.14 Lehmenkühler
threaded insert, metal bracket, hexlocking screw 2:1 (5:1) 6025W3PAT59S20X a Original 6025W3PAT59S20X CONEC ABC NOTES: 1. FOR WAVESOLDERING (SOLDER BATH TEMPERATURE 240 ° C FOR 5 SEC. AND SOLDER PREHEAT 120° C FOR 120 SEC.) 2. METALSHELLS: COPPER ALLOY; min. 315µin TIN ove r 40-80µin NICKEL 3. INSULATORS: PBT GF UL 94 V-0, GREEN 4. SIGNAL CONTACTS: COPPER ALLOY PLATING: GOLD FLASH over NICKEL 5. HIGH POWER CONTACTS 15A: COPPER ALLOY PLATING, MATING AREA: GOLD FLASH over NICKEL PLATING, TERMINATION SIDE: 160-240µin TIN ove r 80µin NICKEL 6. METAL BRACKETS: ZINC DIE CAST; 300µin COPPER/40-120µin NICKEL/120-200µin TIN 7. THREADED INSERTS: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL 8. COLLARS: COPPER ALLOY; NICKEL PLATED 9. HEXLOCKING SCREWS: STAINLESS STEEL 10. FRAME: ZINC DIE CAST; NICKEL PLATED 11. O-RING: SILICON; BLUE 12. RUBBER GASKET: TPE, BLACK 13. SEALING COMPOUND: PUR; BLUE 14. P.C.B. HOLE DRILLINGS and RECOMMENDED PANEL CUT-OUT ON SHEET 2 15. RECOMMENDED TORQUE FOR MOUNTING SCREW 16. CONNECTOR IS PART MARKED: 6025W3PAT59S20X CONE C ABC RUBBER GASKET PLACED ON TOP SURFACE OF MALE INSULATER AT ALL TIMES WATER RESISTANT CONNECTORS NOT IN USE SHOULD BE COVERED WITH A CONEC WATER RESISTANT CAP OR WATER TIGHT HOOD. RoHS compliant 8,26 - 0,03 0,22+ 5,7 -0,31 3,6 -00,25 4,69 0,3 7,53 0,3 3,3 - 0,3 0,5+ 6,35\ 0,3 5,93 0,3 10,5\ 0,3 1,9 Ø (3x) 0,6 0,05 Ø (22x) 4,8SW 5,65 0,2 9,9 0,2 4-40 UNC 4,6 9,4 m ax. 2 SEALING COMPOUND METAL BRACKET 4-40 UNC 21,1 -00,3 78 - 0 0,3+ 63,5\` 0,13 55,3 - 0 0,25+ 10°POS. A1 POS.1 POS.12 2,25 SEE NOTE 16 3,18n (2x) SEE NOTE 10