6017W2SAM61B50X CONEC

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(free datasheet download site)
  • PDF pages: 2

Technical content

dim. in mm RR RR date drawn Inventor 10 THIS DRAW ING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH d-old norm appd. tolerance material: title: dwg no: DIN- sh: part no: namedate namedescriptionrev.DO NOT ALTER CAD DRAWING BY HAND scale: CUSTOMER APPROVAL DATE: NAME: TITLE: COMPANY NAME: APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # AP PROVAL APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # AP PROVAL 15K1A741 D-SUB COMBINATION FEMALE SEE NOTE Henneboel29.10.10

29.10.10 Fischer

with threaded lock and hexlocking screw 2:1 (5:1) 6017W2SAM61B50X a Origin 6017W2SAM61B50X CONEC ABC 38,5 - 0,25 0 + 61,4 - 0 0,3+ 21,1 -00,3 4-40 UNC 10° O-RING SEE NOTE 14 SEE NOTE 9 ( 5 : 1 ) 14,25 0,3 7,1 0,3 3,6 -00,25 5,73 -0,08 0,17 8 - 0,23 0,02+ 4-40 UNC 4,6 6,1 4,8SW SEALING COMPOUND 1,16n (15x) NOTES: 1. RECOMMENDED SOLDER INSTRUCTION SEE SHEET 2 2. METALSHELLS: COPPER ALLOY; min. 315µin TIN ove r 40-80µin NICKEL 3. INSULATORS: PBT GF UL 94 V-0, GREEN 4. SIGNAL CONTACTS: COPPER ALLOY PLATING: GOLD FLASH over NICKEL SOLDER CUP ACCEPTS CABLE AWG 20 5. HIGH POWER CONTACTS 10A: COPPER ALLOY PLATING MATING AREA: GOLD FLASH over NICKEL SOLDER CUP ACCEPTS CABLE AWG 16-20 6. THREADED LOCKS: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL 7. COLLARS: COPPER ALLOY; min. 200µin TIN over 80 µin NICKEL 8. SEALING COMPOUND: PUR; BLUE 9. FRAME: ZINC DIE CAST; NICKEL PLATED 10. O-RING: SILICON; BLUE 11. HEXLOCKING SCREWS: STAINLESS STEEL 12. RECOMMENDED PANEL CUT-OUT SEE SHEET 2 13. RECOMMENDED TORQUE FOR MOUNTING SCREW 35Ncm 14. CONNECTOR IS PART MARKED: 6017W2SAM61B50X CON EC ABC AT ALL TIMES WATER RESISTANT CONNECTORS NOT IN USE SHOULD BE COVERED WITH A CONEC WATER RESISTANT CAP OR WATER TIGHT HOOD. 1,8n (2x) 47,04\` 0,13 9,4 4 Ø

dim. in mm RR RR date drawn Inventor 10 THIS DRAW ING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH d-old norm appd. tolerance material: title: dwg no: DIN- sh: part no: namedate namedescriptionrev.DO NOT ALTER CAD DRAWING BY HAND scale: CUSTOMER APPROVAL DATE: NAME: TITLE: COMPANY NAME: APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # AP PROVAL APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # AP PROVAL 15K1A741 PANEL CUT-OUT SEE SHEET 1 Henneboel29.10.10 D-SUB COM. FEMALE 17W2S SOLDER CUP with threaded lock and hexlocking screw 2:1 SEE SHEET 1 a Origin 2,1 R \ 0,13 0,1 2,8 -00,1 n (2x) 47,04\ 0,1 42,9\` 0,1 i 0,20 B B A i 0,20 A RECOMMENDED PANEL CUT-OUT Solder Instruction 1. Cable should be prepared for soldering. The cable/wires must be pretinned. 2. Insert cable/wire into solder cup. 3. Signal Contact 3.1. Operate the soldering iron at 350° C, 50 Watt max. and use a pencil tip. 3.2. Put tip to wire in solder cup. 3.3. After 1 second bring in solder. 3.4. Heat for 3 seconds longer. Do not heat contact more than 4 seconds in total. 4. Power Contact 4.1. Operate the soldering iron at 350° C, 100 Watt max. and use a pencil tip. 4.2. Put tip to wire in solder cup. 4.3. After 1 second bring in solder. 4.4. Heat for 5 seconds longer. Do not heat contact more than 6 seconds in total. 5. Remove soldering iron. 6. Wait until solder gets rigid again. 7. Do not solder adjacent contacts consecutively, alternate position within the connector to minimize heat build up.