6005W1PAU59R20X CONEC
Document overview
- Manufacturer or author: Provided By www.digicamel.com(free datasheet download site)
- PDF pages: 2
Technical content
( 5 : 1 ) AA AA AA AA BB BB BB BB CC CC CC CC DD DD DD DD EE EE EE EE FF FF FF FF AA AA AA AA BB BB BB BB CC CC CC CC DD DD DD DD dim. in mm RR RR date drawn THIS DRAW ING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH d-old norm appd. tolerance material: title: dwg no: DIN- sh: part no: namedate namedescriptionrev.DO NOT ALTER CAD DRAWING BY HAND scale: 15K1A1850 D-SUB COMBINATION MALE 90° SEE NOTES Henneboel12.02.16
12.02.16 Lehmenkühler
with threaded insert, metal bracket and hexlocking screw 2:1 (5:1) 6005W1PAU59R20X a Original 6005W1PAU59R20X CONEC ABC RoHS compliant 16,84 - 0,05 0,2+ 39,4 - 0 0,3+ 21,1 -00,3 SEE NOTE 15 SEE NOTE 10 O-RING 4,8SW 8,26 - 0,03 0,22+ 0,3 3,6 -00,25 SEALING COMPOUND 5,7 -0,18 0,12 AT ALL TIMES WATER RESISTANT CONNECTORS NOT IN USE SHOULD BE COVERED WITH A CONEC WATER RESISTANT CAP OR WATER TIGHT HOOD. 10° 4-40 UNC 6,35\ 0,3 m ax. 2 25 - 0,13 0,12+ 4-40 UNC 9,9 0,2 METAL BRACKET NOTES: 1. FOR WAVESOLDERING (SOLDER BATH TEMPERATURE 240 ° C FOR 5 SEC. AND SOLDER PREHEAT 120° C FOR 120 SEC.) 2. METALSHELLS: COPPER ALLOY; min. 315µin TIN ove r 40-80µin NICKEL 3. INSULATORS: PBT GF UL 94 V-0; GREEN 4. SIGNAL CONTACTS: COPPER ALLOY PLATING: GOLD FLASH over NICKEL 5. HIGH POWER CONTACT 15A: COPPER ALLOY PLATING, MATING AREA: GOLD FLASH over NICKEL PLATING, TERMINATION SIDE: 160-240µin TIN ove r 80µin NICKEL 6. METAL BRACKETS: ZINC DIE CAST; 300µin COPPER/40-120µin NICKEL/120-200µin TIN 7. THREADED INSERTS: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL 8. COLLARS: COPPER ALLOY; NICKEL PLATED 9. HEXLOCKING SCREWS: STAINLESS STEEL 10. FRAME: ZINC DIE CAST; NICKEL PLATED 11. O-RING: SILICON; BLUE 12. SEALING COMPOUND: PUR; BLUE 13. P.C.B. HOLE DRILLINGS and RECOMMENDED PANEL CUT-OUT ON SHEET 2 14. RECOMMENDED TORQUE FOR MOUNTING SCREW 15. CONNECTOR IS PART MARKED: 6005W1PAU59R20X CON EC ABC 4,6 9,4 Pos. 1 4,55 - 0,3 0,5+ 9,84 0,3 Pos. A1 Pos. 3 10,5\ 0,3 5,93 0,3 (4,15) n 1,9 0,6 n 0,05 (4x) 3,18n (2x) 7,15 0,2
dim. in mm RR RR date drawn THIS DRAW ING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH d-old norm appd. tolerance material: title: dwg no: DIN- sh: part no: namedate namedescriptionrev.DO NOT ALTER CAD DRAWING BY HAND scale: 15K1A1850 P.C.B. HOLE DRILLINGS SEE SHEET 1 Henneboel12.02.16 D-SUB COMBINATION MALE 90° SOLDER PIN ANGLED 3:1 SEE SHEET 1 a Original 20,5\ 0,1 11,4 0,1 10°\ 1° 3,1 0,05 n (2x) 25\ 0,1 B A i 0,26 B i 0,26 A RECOMMENDED PANEL CUT OUT 3,4R \ 0,13 4,85 3,63 0,1 25 - 0,13 0,12+ 2,3\ 0,1n 3,1\ 0,1n (2x) 10,75 P.C.B. EDGE FRONTPANEL P.C.B. HOLE DRILLINGS ( P.C.B. TOP SIDE ) 5,54\ 0,1 4,14\ 0,1 1 - 0 0,1+n (4x) 4,7 0,1 2,84 0,1