6003W3PXX61B30X CONEC

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(free datasheet download site)
  • PDF pages: 2

Technical content

( 5 : 1 ) A A B B C C D D E E F F A A B B C C D D dim. in mm RR RR date drawn Inventor 10 THIS DRAW ING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH d-old norm appd. tolerance material: title: dwg no: DIN- sh: part no: namedate namedescriptionrev.DO NOT ALTER CAD DRAWING BY HAND scale: CUSTOMER APPROVAL DATE: NAME: TITLE: COMPANY NAME: APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # AP PROVAL APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # AP PROVAL 15K1A683 D-SUB COMBINATION MALE SEE NOTES Lehmenkühler02.07.10

05.07.10 Fischer

with threaded insert and hexlocking screw 2:1 (5:1) 6003W3PXX61B30X a Origin 6003W3PXX61B350X CONEC ABC NOTES: 1. RECOMMENDED SOLDER INSTRUCTION SEE SHEET 2 2. METALSHELLS: COPPER ALLOY; min. 315µin TIN over 40-80µin NICKEL 3. INSULATOR: PBT GF UL 94 V-0, GREEN 4. HIGH POWER CONTACTS 10A: COPPER ALLOY PLATING MATING AREA: 8µin HARD GOLD over min. 50µin NICKEL PLATING TERMINATION SIDE: 8µin HARD GOLD over min. 50µin NICKEL SOLDER CUP ACCEPTS CABLE AWG 16-20 5. THREADED INSERTS: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL 6. COLLARS: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL 7. HEXLOCKING SCREWS: STAINLESS STEEL 8. FRAME: ZINC DIE CAST; NICKEL PLATED 9. O-RING: SILICON; BLUE 10. RUBBER GASKET: TPE; BLACK 11. RECOMMENDED PANEL CUT-OUT ON SHEET 2 12. RECOMMENDED TORQUE FOR MOUNTING SCREW 13. CONNECTOR IS PART MARKED: 6003W3PXX61B30X CON EC ABC AT ALL TIMES WATER RESISTANT CONNECTORS NOT IN USE SHOULD BE COVERED WITH A CONEC WATER RESISTANT CAP OR WATER TIGHT HOOD. 47,7 0,3+ 21,1 -00,3 O-RING SEE NOTE 13 14,23 -0,38 0,12 3,6 -00,25 5,7 -0,18 0,12 SEALING COMPOUND 4-40 UNC SEE NOTE 8 4,8SW 25,17-0,05 0,2+ 10° 1,8n (3x) 8,26-0,03 0,22+ RUBBER GASKET PLACED ON TOP SURFACE OF MALE INSULATOR 33,3-0,1 0,15+ 4-40 UNC 9,4 4,6

A A B B C C D D E E F F A A B B C C D D dim. in mm RR RR date drawn Inventor 10 THIS DRAW ING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH d-old norm appd. tolerance material: title: dwg no: DIN- sh: part no: namedate namedescriptionrev.DO NOT ALTER CAD DRAWING BY HAND scale: CUSTOMER APPROVAL DATE: NAME: TITLE: COMPANY NAME: APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # AP PROVAL APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION APPROVAL # FREIGABE # DEBLOCAGE # AUTORIZACION # AP PROVAL 15K1A683 RECOMMENDED PANEL CUT-OUT SEE SHEET 1 Lehmenkühler02.07.10 D-SUB COMB. MALE 3W3P SOLDER CUP with threaded insert and hexlocking screw 5:1 SEE SHEET 1 a Origin RECOMMENDED PANEL CUT-OUT Solder Instruction 1. Cable should be prepared for soldering. The cable/wires must be pretinned. 2. Insert cable/wire into solder cup. 3. Operate the soldering iron at 350° C, 100 Watt max. and use a pencil tip. 4. Put tip to wire in solder cup. 5. After 1 second bring in solder. 6. Heat for 5 seconds longer. Do not heat contact more than 6 seconds in total. 7. Remove soldering iron. 8. Wait until solder gets rigid again. 9. Do not solder adjacent contacts consecutively, alternate position within the connector to minimize heat build up. 3,4 R 0,13 11,4 0,1 28,8\ 0,1 3,1 0,05 n (2x) i 0,26B i 0,26A 10°\ 1° 33,32\` 0,1 B A