5KP5.0A MDE

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 3

Technical content

FEATURES

  • Plastic package has Underwriters Laboratory Flammability Classification 94 V-O
  • Glass passivated junction
  • 5000W Peak Pulse Power capability on 10/1000 µs waveform
  • Glass passivated junction
  • Low incremental surge resistance
  • Excellent clamping capability
  • Repetition rate (duty cycle): 0.05%
  • Fast response time: typically less than 1.0 ps from 0 volts to BV
  • Typical IR less than 1µA above 10 V
  • High temperature soldering guaranteed: 265°C/10 seconds/ .375", (9.5mm) lead length, 5lbs., (2.3kg) tension MECHANICAL DATA Case: Molded plastic over glass passivated junction Terminals: Plated Axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denoted positive end (cathode) except Bipolar Mounting Position: Any Weight: 0.07 ounces, 2.1 gram Ratings at 25°C ambient temperature unless otherwise specified. RATING SYMBOL VALUE UNITS Peak Pulse Power Dissipation on 10/1000 µs waveform (NOTE 1, Fig.1) IPPM SEE TABLE 1 Amps Superimposed on Rated Load, (JEDEC Method)(Note 3) Operatings and Storage Temperature Range T J, TSTG -55 +175 °C NOTES: 1. Non-repetitive current pulse, per Fig.3 and derated above Ta=25 °C per Fig.2. 3. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle=4 pulses per minutes maximum. Certified RoHS Compliant UL File # E223026 VOLTAGE-5.0 TO 220.0 Volts

5000 Watt Peak Pulse Power

MAXIMUM RATINGS AND CHARACTERISTICS Electrical characteristics apply in both directions. For Bidirectional use C or CA Suffix for types 5KP5.0 thru types 5KP220 (e.g. 5KP5.0C, 5KP220CA) DEVICES FOR BIPOLAR APPLICATIONS MDE Semiconductor, Inc. 78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel : 760-564-8656 • Fax : 760-564-2414 1-800-831-4881 Email: sales@mdesemiconductor.com Web: www.mdesemiconductor.com GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR Peak Pulse Current of on 10/1000 µs waveform (Note 1,Fig 3) PM(AV) 8.0Steady State Power Dissipation at TL = 75°C Lead lengths .375", 9.5mm (Note 2) Watts PPPM Minimum 5000 Watts IFSM 400 AmpsPeak Forward Surge Current, 8.3ms Single Half Sine-wave

RATING AND CHARACTERISTIC CURVES 5KP SERIES MDE Semiconductor, Inc. 78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel : 760-564-8656 • Fax : 760-564-2414 1-800-831-4881 Email: sales@mdesemiconductor.com Web: www.mdesemiconductor.com 0.1 100 10ms0.1µs 1.0µs 10µs 100µs 1.0ms td - Pulse Width (sec.) Fig. 1 - Peak Pulse Power Rating Curve PPPM-Peak Pulse Power (kW) Non-repetitive pulse waveform shown in Fig.3 T A = 25°C 100 1000 10000 100000 1 10 100 1000 5 Fig. 4 - Typical Junction Capacitance 200 Measured at Stand-off Vottage, Measured at Zero Bias TJ = 25°C f = 1MHZ Vsig = 50mVp- V(br) Breakdown Voltage, Volts CJ, Junction Capacitance (pF) PPM(AV),Steady State Power Dissipation (W) Fig. 5 - Steady State Power Derating Curve TL - Lead Temperature (°C) 0.375" (9.5mm) Lead Lengths Copper Heat Sinks 60Hz Resistive or Inductive Load 3.0 4.0 150 1.0 2.0 tr = 10µsec. Peak Value IPPM TJ = 25°C Pulse Width(td)is defined as the point where the peak current decays to 50% of I PPM 10/1000µsec.Waveform as defined by R.E.A. td Fig.3 - Pulse Waveform 4.0 Half Value- IPPM 100 IPPM - Peak Pulse Current,% IRSM 3.00 12.5 37.5 62.5 87.5 100 0 25 50 75 100 125 150 175 200 Fig.2 - Pulse Derating Curve TA - Ambient Temperatur(°C) PPPM-Peak Pulse Power (kW) 100 150 200 250 300 350 400 1 10 100 Fig.6 - Maximum Non-repetitive Forward Surge current Number of Cycles at 60 HZ IFSM,Peak Forward Surge Currnet (A) 8.3ms Single Half Sine-Wave (JEDEC Method)

5000 Watt TVS

VRWM (V) BREAKDOWN VOLTAGE VBR (V) MIN. @ IT BREAKDOWN VOLTAGE VBR (V) MAX. @ IT TEST CURRENT (IT) mA MAXIMUM CLAMPING VOLTAGE @IPP VC (V) PEAK PULSE CURRENT IPP (A) REVERSE LEAKAGE @ VRWM IR (µA) 5KP90A 5KP90CA 90.00 100.00 111.00 5 146 34.3 10 5KP100A 5KP100CA 100.00 111.00 123.00 5 162 30.9 10 5KP110A 5KP110CA 110.00 122.00 135.00 5 177 28.3 10 5KP120A 5KP120CA 120.00 133.00 147.00 5 193 26.0 10 5KP130A 5KP130CA 130.00 144.00 159.00 5 209 24.0 10 5KP150A 5KP150CA 150.00 167.00 185.00 5 243 20.6 10 5KP160A 5KP160CA 160.00 178.00 197.00 5 259 19.3 10 5KP170A 5KP170CA 170.00 189.00 209.00 5 275 18.2 10 5KP180A 5KP180CA 180.00 200.00 233.00 5 289 17.6 10 5KP190A 5KP190CA 190.00 211.00 233.00 5 310 9.7 10 For bidirectional type having Vrwm of 10 volts and less, the IR limit is double. For parts without A , the VBR is + 10% Certified RoHS Compliant UL File # E223026 MDE Semiconductor, Inc. 78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel : 760-564-8656 • Fax : 760-564-2414 1-800-831-4881 Email: sales@mdesemiconductor.com Web: www.mdesemiconductor.com