5KP5.0A LITTELFUSE

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 4

Technical content

298 www.littelfuse.com

FEATURES

  • RoHS Compliant
  • 5.0 to 220 Volts
  • Glass passivated chip junction
  • Uni-directional and Bi-directional
  • 5000W Peak Pulse Power capability on 10/1000µs waveform
  • Excellent clamping capability
  • Repetition rate (duty cycle): 0.05%
  • Low incremental surge resistance
  • Fast response time: typically less than 1.0ps from 0 Volts to BV
  • Typical IR less than 1µA for VBR>=10V
  • High temperature soldering guaranteed: 265˚C/10 seconds/.375"(9.5mm) lead length, 5lbs., (2.3kg) tension Agency Approvals: Recognized under the Components Program of Underwriters Laboratories. Agency File Number: E128662 5KP C A Voltage Bi-Directional 5% Voltage Tolerance Packaging Option B = Bulk (500 pcs) T = Tape and reeled (800 pcs)

ORDERING INFORMATION

5000 Watt Axial Leaded Transient Voltage Suppressor

MAXIMUM RATINGS AND CHARACTERISTICS @25˚C AMBIENT TEMPERATURE (unless otherwise noted) UNIT Watts Amps Watts Amps Notes: 1. Non-repetitive current pulse, per Fig.3 and derated above TA= 25˚C per Fig.2 2. Mounted on Copper Pad area of 0.8x0.8"(20x20mm) per Fig.5. 3. 8.3 ms single half sine-wave, or equivalent square wave, Duty cycle= 4 pulses per minutes maximum. SYMBOL PPPM IPPM PM(AV) IFSM Tj, TSTG VALUE Min 5000 SEE TABLE 1 400 -55 to +175 RATING Peak Pulse Power Dissipation on 10/1000µs waveform(Note 1, FIG. 1) Peak Pulse Current of on 10/1000µs waveform (Note 1, FIG. 3) Steady State Power Dissipation at TL=75˚C, Lead lengths .375", (9.5mm)(Note 2) Peak Forward Surge Current, 8.3ms Single Half Sine-Wave Superimposed on Rated Load, (JEDEC Method) (Note 3) Operating junction and Storage Temperature Range The 5KP Series is designed specifically to protect sensitive electronics equipment from voltage transients induced by lightning and othertransient voltage events. These devices are ideal for the protection of I/O interfaces, Vcc bus and other vulnerable circuits used in automotive, industrial and consumer electronic applications. Mechanical Specifications: Weight: 0.07 ounce, 2.1 gram Case: Molded plastic over glass passivated junction Mounting Position: Any Polarity: Color band denotes positive end (cathode) except Bipolar Terminal: Plated Axial leads, solderable per MIL-STD-750, Method 2026 RoHS

299www.littelfuse.com 6SILICON DIODE ARRAYS VBR (Volts) @ IT Maximum Reverse Leakage IR @ VR (µA) Maximum Clamping Voltage VC @ IPP (Volts) Maximum Peak Pulse Current IPP (A) ELECTRICAL SPECIFICATION @ Tamb 25°C Reverse Stand off Voltage V R (Volts) Test Current IT (mA) For bidirectional type having Vrwm of 30 volts and less, the IR limit is double. For parts without A , the VBR is + 10% MIN MAXUni-Polar Bi-Polar 5KP SeriesRoHS

300 www.littelfuse.com Fig. 1 Peak Pulse Power Rating Curve Fig. 2 Pulse Derating Curve Fig. 3 Pulse Waveform Fig. 4- Typical Junction Capacitance Fig. 6- Maximum Non-repetitive Forward Surge Current IFSM, Peak Forward Surge Current (A) 100 150 200 250 300 350 400 100101 Number of Cycles at 60HZ Fig. 5 Steady State Power Derating Curve IPPM- Peak Pulse Current, % I RSM 100 150 1.0 2.0 3.0 4.0 tr=10µsec Peak Value IPPM Half Value IPPM TJ=25˚C Pulse Width(td) is defined as the point where the peak current decays to 50% of IPPM 10/1000µsec. Waveform as defined by R.E.A td t-Time (ms) TL- Lead Temperature (˚C) Steady State Power Dissipation (W) 00 25 50 75 100 125 150 175 200 L=0.375(9.5mm) Lead Lengths 0.8x0.8x.040'' (20x20mm) Copper Heat Sinks 60HZ Resistive or Inductive Load TA- Ambient Temperature (˚C) Peak Pulse Power (KW) 100 100 125 150 175 200 CJ-Junction Capacitance (pF) 1000 100 10000 100000 10 100 200 Vbr, Breakdown Voltage TJ=25˚C f=1MH2Vsig=50mVp-p Measured at Stand-off Voltage 8.3ms Single Half Sine-Wave PPPM- Peak Pulse Power (kW) 0.1µs 1.0µs 10µs 100µs 1.0ms 10ms 0.1 100 td- Pulse Width (sec.) Non-repetitive pulse waveform shown in Fig.3 TA=25˚C Ratings and Characteristic Curves TA=25˚C unless otherwise noted 5KP SeriesRoHS

301www.littelfuse.com 6SILICON DIODE ARRAYS Package Outline Dimensions 0.360 (9.1) 0.340 (8.6) DIA. 1.0 (25.4) MIN. 0.360 (9.1) 0.340 (8.6) 1.0 (25.4) MIN.0.052 (1.32) 0.048 (1.22) DIA. Case Style P600 Dimensions in inches and (millimeters) 5KP SeriesRoHS