Download PDF5KP5.0C EIC
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 4
Technical content
5KP5.0C SERIES BI-DIRECTIONAL TRANSIENT VOLTAGE SUPPRESSOR V RM : 5.0 - 180 Volts PPK : 5000 Watts FEATURES : * 5000W Peak Pulse Power * Excellent clamping capability * Low incremental surge resistance * Fast response time : typically less then 1.0 ps from 0 volt to V BR(min.) * Typical I R less then 1µA above 10V MECHANICAL DATA * Case : Molded plastic * Epoxy : UL94V-O rate flame retardant * Lead : Axial lead solderable per MIL-STD-202, Method 208 guaranteed * Polarity : Cathode polarity band * Mounting position : Any * Weight : 2.1 grams DEVICES FOR UNIPOLAR APPLICATIONS For uni-directional without "C" Electrical characteristics apply in both directions MAXIMUM RATINGS Rating at 25 °C ambient temperature unless otherwise specified. Rating Symbol Value Unit Peak Pulse Power Dissipation at tp = 1ms (Note 1, Fig. 4) Steady State Power Dissipation at T L = 75 °C Lead Lengths 0.375", (9.5mm) (Note 2) Operating and Storage Temperature Range TJ, TSTG - 55 to + 150 °C Notes : (1) Non-repetitive Current pulse, per Fig. 2 and derated above Ta = 25 °C per Fig. 1 (2) Mounted on Copper Leaf area of 0.79 in 2 (20mm2). Page 1 of 4 Rev. 06 : March 25, 2005 PD PPK Minimum 5000 W 8.0 W 0.360 (9.1) 0.340 (8.6) 0.360 (9.1) 0.340 (8.6) 0.052 (1.32) 0.048 (1.22) Dimensions in inches and ( millimeters ) 1.00 (25.4) MIN. 1.00 (25.4) MIN. * Pb / RoHS Free
ELECTRICAL CHARACTERISTICS
Rating at 25 °C ambient temperature unless otherwise specified Breakdown Voltage @ I T Reverse Maximum Maximum Maximum Maximum ( Note 1 ) Stand off Reverse Leakage Peak Pulse Clamping Temperature Voltage @ VRM Current (Note2) Voltage @ I PPM Coefficient VBR (V) IT VRM IR IPPM VC of VBR Min. Max. (mA) (V) (µA) (A) (V) (%/°C) Page 2 of 4 Rev. 06 : March 25, 2005 Type
Rating at 25 °C ambient temperature unless otherwise specified Breakdown Voltage @ I T Reverse Maximum Maximum Maximum Maximum ( Note 1 ) Stand off Reverse Leakage Peak Pulse Clamping Temperature Voltage @ VRM Current (Note2) Voltage @ IPPM Coefficient VBR (V) IT VRM IR IPPM VC of VBR Min. Max. (mA) (V) (µA) (A) (V) (%/°C) 5KP58C 64.4 78.7 5.0 58 10 49 103 0.107 5KP58CA 64.4 71.2 5.0 58 10 53 94 0.107 5KP60C 66.7 81.5 5.0 60 10 47 107 0.108 5KP60CA 66.7 73.7 5.0 60 10 52 97 0.108 5KP64C 71.1 96.9 5.0 64 10 44 114 0.108 5KP64CA 71.1 78.6 5.0 64 10 49 103 0.108 5KP70C 77.6 95.1 5.0 70 10 40 125 0.108 5KP70CA 77.6 86.0 5.0 70 10 44 113 0.108 5KP75C 83.3 102 5.0 75 10 37 134 0.108 5KP75CA 83.3 92.1 5.0 75 10 41 121 0.108 5KP78C 86.7 106 5.0 78 10 36 139 0.108 5KP78CA 86.7 95.8 5.0 78 10 40 126 0.108 5KP85C 94.4 115 5.0 85 10 33 151 0.108 5KP85CA 94.4 104 5.0 85 10 36 137 0.110 5KP90C 100 122 5.0 90 10 31 160 0.110 5KP90CA 100 111 5.0 90 10 34 146 0.110 5KP100C 111 136 5.0 100 10 28 179 0.110 5KP100CA 111 123 5.0 100 10 31 162 0.110 5KP110C 122 149 5.0 110 10 26 196 0.112 5KP110CA 122 135 5.0 110 10 28 177 0.112 5KP120C 133 163 5.0 120 10 24 211 0.112 5KP120CA 133 147 5.0 120 10 26 194 0.112 5KP150C 167 204 5.0 150 10 19 263 0.112 5KP150CA 167 184 5.0 150 10 21 242 0.112 5KP160C 178 217 5.0 160 10 18 281 0.114 5KP160CA 178 196 5.0 160 10 19 258 0.114 5KP180C 200 244 5.0 180 10 16 316 0.114 5KP180CA 200 221 5.0 180 10 17 290 0.114 Note: ( 1 ) V BR measured after I T applied for 300 µs., IT = square wave pulse or equivalent. Page 3 of 4 Rev. 06 : March 25, 2005 Type
RATING AND CHARACTERISTIC CURVES ( 5KP5.0C SERIES ) FIG.1 - PULSE DERATING CURVE FIG.2 - PULSE WAVEFORM 0 25 50 75 100 125 150 175 Ta, AMBIENT TEMPERATURE, ( °C) FIG.3 - STEADY STATE POWER DERATING FIG.4 - PULSE RATING CURVE Page 4 of 4 Rev. 06 : March 25, 2005 120 8.0 100 2.0 6.0 0.1 4.0 1.0 tp, PULSE WIDTH PEAK PULSE DERATING IN % OF PEAK POWER OR CURRENT Pp,PEAK POWER (kW) 100 100 125 1750 25 50 75 150 0.1µs 1.0µs 10µs 100µs 10ms1.0ms 200 TL, LEAD TEMPERATURE (°C) PD, STEADY STATE POWER DISSIPATION (WATTS) tp 100 Tr = 10µs Peak Value IRSM Half Value - IRSM T, TIME(ms) PEAK PULSE CURRENT - % IRMS 1.0 2.0 3.0 4.00 TJ=25 °C Pulse Width (tp) is defined as that point where the peak current decays to 50% of IRSM 10X1000 Waveform as defined by R.E.A. Single Phase Half Wave