5KP SECOS

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 4

Technical content

Voltage 5.0V ~ 250V 5000W Peak Power TVS 06-Jul-2015 Rev.A Page 1 of 4 A suffix of "-C" specifies halogen & RoHS compliant

DESCRIPTION

The 5KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.

FEATURES

/circle6 VBR @T J = V BR @25° C x (1+ αT x (T J - 25)) ( αT:Temperature Coefficient) /circle6 Glass passivated chip junction in P600 package /circle6 5000W peak pulse capability at 10/1000 µs waveform, repetition rate (duty cycles):0.01% /circle6 Excellent clamping capability /circle6 Typical failure mode is short from over-specified voltage or current /circle6 Fast response time: typically less than 1.0ps from 0 Volts to BV min /circle6 Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c /circle6 IEC-61000-4-2 ESD 15kV(Air), 8kV (Contact) /circle6 ESD protection of data lines in accordance with IEC 61000-4-2 (IEC801-2) /circle6 EFT protection of data lines in accordance with IEC 61000-4-4 (IEC801-4) /circle6 Low incremental surge resistance /circle6 Typical I R less than 2 µA above 12V /circle6 High temperature soldering guaranteed: 260° C/40 seconds / 0.375”, (9.5mm) lead length, 5 lbs., (2.3kg) tension /circle6 Plastic package has underwriters laboratory flammability classification 94V-O /circle6 Matte tin lead–free plated /circle6 Halogen free and RoHS compliant /circle6 2nd level interconnect is Pb-free per IPC/JEDEC J-STD-609A.01

APPLICATIONS

TVS devices are ideal for the protection of I/O interfaces, VCC bus and other vulnerable circuits used in telecom, computer, industrial and consumer electronic applications. MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (T A=25° C unless otherwise noted) Parameter Symbol Value Unit Peak Pulse Power Dissipation by 10/1000 µs Test Waveform 1 P PPM 5000 W Power Dissipation on infinite heatsink at T L=75° C P D 8.0 W Peak Forward Surge Current, 8.3ms single half sine-wave unidirectional only 2 IFSM 400 A Maximum Instantaneous Forward Voltage at 100A for Unidirectional Only 3 VF 3.5/5.0 V Typical Thermal Resistance Junction to Lead R θJL 8.0 ° C/W Typical Thermal Resistance Junction to Ambient R θJA 40 ° C/W Operating and Storage Temperature Range T J, TSTG -55 ~ 175 ° C Notes: 1. Non-repetitive current pulse , per Fig. 4 and derated above T A = 25° C per Fig. 3. 2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per minute maximum. 3. V F<3.5V for devices of V BR ≤200V and V F<5.0V for devices of V BR ≥201V. Millimeter REF. Min. Max. A 25.4 REF B 8.6 9.1 C 8.6 9.1 D 1.2 1.3 AC B AD R-6

Voltage 5.0V ~ 250V 5000W Peak Power TVS 06-Jul-2015 Rev.A Page 2 of 4 ELECTRICAL CHARACTERISTIC (T A=25° C unless otherwise noted) BREAKDOWN VOLTAGE @I T PART NUMBER REVERSE STANDOFF VOLTAGE MIN MAX TEST CURRENT MAX CLAMPING VOLTAGE VC @I PP PEAK PULSE CURRENT REVERSE LEAKAGE IR @V RRM DIRECTIONAL V R V BR V BR I T V C I PP I R UNI BI V V V mA V A uA 5KP7.0A 5KP7.0CA 7 7.78 8.6 50 12 425 1000 5KP10A 5KP10CA 10 11.1 12.3 5 17 300 15 5KP11A 5KP11CA 11 12.2 13.5 5 18.2 280.2 2 5KP12A 5KP12CA 12 13.3 14.7 5 19.9 256.3 2 5KP13A 5KP13CA 13 14.4 15.9 5 21.5 237.2 2 5KP14A 5KP14CA 14 15.6 17.2 5 23.2 219.8 2 5KP15A 5KP15CA 15 16.7 18.5 5 24.4 209 2 5KP16A 5KP16CA 16 17.8 19.7 5 26 196.2 2 5KP17A 5KP17CA 17 18.9 20.9 5 27.6 184.8 2 5KP18A 5KP18CA 18 20 22.1 5 29.2 174.7 2 5KP20A 5KP20CA 20 22.2 24.5 5 32.4 157.4 2 5KP22A 5KP22CA 22 24 26.9 5 35.5 143.7 2 5KP24A 5KP24CA 24 26.7 29.5 5 38.9 131.1 2 5KP26A 5KP26CA 26 28.9 31.9 5 42.1 121.1 2 5KP28A 5KP28CA 28 31.1 34.4 5 45.4 112.3 2 5KP30A 5KP30CA 30 33.3 36.8 5 48.4 105.4 2 5KP33A 5KP33CA 33 36.7 40.6 5 53.3 95.7 2 5KP36A 5KP36CA 36 40 44.2 5 58.1 87.8 2 5KP40A 5KP40CA 40 44.4 49.1 5 64.5 79.1 2 5KP43A 5KP43CA 43 47.8 52.8 5 69.4 73.5 2 5KP45A 5KP45CA 45 50 55.3 5 72.7 70.2 2 5KP48A 5KP48CA 48 53.3 58.9 5 77.4 65.9 2 5KP51A 5KP51CA 51 56.7 62.7 5 82.4 61.9 2 5KP54A 5KP54CA 54 60 66.3 5 87.1 58.6 2 5KP58A 5KP58CA 58 64.4 71.2 5 93.6 54.5 2 5KP60A 5KP60CA 60 66.7 73.7 5 96.8 52.7 2 5KP64A 5KP64CA 64 71.1 78.6 5 103 49.5 2 5KP70A 5KP70CA 70 77.8 86 5 113 45.1 2 5KP75A 5KP75CA 75 83.3 92.1 5 121 42.1 2 5KP78A 5KP78CA 78 86.7 95.8 5 126 40.5 2 5KP85A 5KP85CA 85 94.4 104 5 137 37.2 2 5KP90A 5KP90CA 90 100 111 5 146 34.9 2 5KP100A 5KP100CA 100 111 123 5 162 31.5 2 5KP110A 5KP110CA 110 122 135 5 177 28.8 2 5KP120A 5KP120CA 120 133 147 5 193 26.4 2 5KP130A 5KP130CA 130 144 159 5 209 24.4 2 5KP150A 5KP150CA 150 167 185 5 243 21 2 5KP160A 5KP160CA 160 178 197 5 259 19.7 2 5KP170A 5KP170CA 170 189 209 5 275 18.5 2 5KP180A 5KP180CA 180 200 221 5 292 17.5 2 5KP190A 5KP190CA 190 211 233 5 310 16.5 2 5KP200A 5KP200CA 200 222 246 5 329.2 15.5 2 5KP210A 5KP210CA 210 233 258 5 349.5 14.6 2 5KP220A 5KP220CA 220 244 270 5 371.1 13.7 2 5KP250A 5KP250CA 250 277 306 5 425 12 2 Notes: 1. For parts without A , the V BR is + 10% and V C is 5% higher than with A parts. 2. For bidirectional type having V R of 10 volts and less, the I R limit is double.

Voltage 5.0V ~ 250V 5000W Peak Power TVS 06-Jul-2015 Rev.A Page 3 of 4 TYPICAL CHARACTERISTICS FIG1- TVS Transients Clamping Waveform FIG2 - Peak Pulse Power Rating Curve FIG3 - Pulse Derating Curve FIG 4 - Pulse Waveform FIG5 - Typical Junction Capacitance FIG6 - Steady State Power Derating Curve

Voltage 5.0V ~ 250V 5000W Peak Power TVS 06-Jul-2015 Rev.A Page 4 of 4 TYPICAL CHARACTERISTICS FIG7 - Maximum Non-Repetitive Peak Forward Surge Current