5KP130CA

5KP_18 SECOS

Document overview

• Manufacturer or author: Provided By digicamel.com
• PDF pages: 4

Technical content

Voltage 5V~190V 5000W Peak Power TVS Elektronische Bauelemente 24-May-2018 Rev. B Page 1 of 4 http://www.SeCoSGmbH.com/ Any changes of specification will not be informed individually. RoHS Compliant Product A suffix of “-C” specifies halogen & lead-free

DESCRIPTION

The 5KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.

FEATURES

/circle6 VBR @T J = V BR @25° C x (1+ αT x (T J - 25)) (αT:Temperature Coefficient) /circle6 Glass passivated chip junction in P600 package /circle6 5000W peak pulse capability at 10/1000 µs waveform, repetition rate (duty cycles): 0.01% /circle6 Excellent clamping capability /circle6 Typical failure mode is short from over-specified voltage or current /circle6 Fast response time: typically less than 1.0ps from 0 Volts to BV min /circle6 Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c /circle6 IEC-61000-4-2 ESD 15kV(Air), 8kV (Contact) /circle6 ESD protection of data lines in accordance with IEC 61000-4-2 (IEC801-2) /circle6 EFT protection of data lines in accordance with IEC 61000-4-4 (IEC801-4) /circle6 Low incremental surge resistance /circle6 Typical I R less than 2 µA above 12V /circle6 High temperature soldering guaranteed: 260° C/40 seconds / 0.375”, (9.5mm) lead length, 5 lbs., (2.3kg) tension /circle6 Plastic package has underwriters laboratory flammability classification 94V-O /circle6 Matte tin lead–free plated /circle6 2nd level interconnect is Pb-free per IPC/JEDEC J-STD-609A.01

APPLICATIONS

TVS devices are ideal for the protection of I/O interfaces, VCC bus and other vulnerable circuits used in telecom, computer, industrial and consumer electronic applications. ORDER INFORMATION MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (T A=25° C unless otherwise noted) Parameter Symbol Ratings Unit Peak Power Dissipation with a 10/1000 µs waveform P PP 5000 W Power Dissipation on infinite heatsink @TL=75° C P D 8 W Peak forward Surge Current @8.3ms single half sine-wave unidirectional only

1 IFSM 500 A

Operating and Storage Temperature Range T J, TSTG -55~150 ° C Note: 1. Measured on 8.3ms single half sine-wave or equivalent square wave, duty cycle=4 pulses per minute maximum. REF. Millimeter Min. Max. A 25.4 REF B 8.6 9.1 C 8.6 9.1 D 1.2 1.3 Part Number Type 5KP SERIES Lead (Pb)-free 5KP SERIES-C Lead (Pb)-free and Halogen-free AC B AD R-6 Functional Diagram

Voltage 5V~190V 5000W Peak Power TVS Elektronische Bauelemente 24-May-2018 Rev. B Page 2 of 4 http://www.SeCoSGmbH.com/ Any changes of specification will not be informed individually. ELECTRICAL CHARACTERISTIC (T A=25° C unless otherwise noted) Part Number Reverse Standoff Voltage Breakdown Voltage @I T Test Current Max. Clamping Voltage VC @I PP Peak Pulse Current Reverse Leakage IR @V RRM Min. Max. Directional V R V BR V BR I T V C I PP I R Uni Bi V V V mA V A uA 5KP10A 5KP10CA 10 11.1 12.3 5 17 294.12 15 5KP11A 5KP11CA 11 12.2 13.5 5 18.2 274.73 2 5KP12A 5KP12CA 12 13.3 14.7 5 19.9 251.26 2 5KP13A 5KP13CA 13 14.4 15.9 5 21.5 232.56 2 5KP14A 5KP14CA 14 15.6 17.2 5 23.2 215.52 2 5KP15A 5KP15CA 15 16.7 18.5 5 24.4 204.92 2 5KP16A 5KP16CA 16 17.8 19.7 5 26 192.31 2 5KP17A 5KP17CA 17 18.9 20.9 5 27.6 181.16 2 5KP18A 5KP18CA 18 20 22.1 5 29.2 171.23 2 5KP19A 5KP19CA 19 21.1 23.3 5 30.8 162.44 2 5KP20A 5KP20CA 20 22.2 24.5 5 32.4 154.32 2 5KP22A 5KP22CA 22 24.4 26.9 5 35.5 140.85 2 5KP24A 5KP24CA 24 26.7 29.5 5 38.9 128.53 2 5KP26A 5KP26CA 26 28.9 31.9 5 42.1 118.76 2 5KP28A 5KP28CA 28 31.1 34.4 5 45.4 110.13 2 5KP30A 5KP30CA 30 33.3 36.8 5 48.4 103.31 2 5KP33A 5KP33CA 33 36.7 40.6 5 53.3 93.81 2 5KP36A 5KP36CA 36 40 44.2 5 58.1 86.06 2 5KP40A 5KP40CA 40 44.4 49.1 5 64.5 77.52 2 5KP43A 5KP43CA 43 47.8 52.8 5 69.4 72.05 2 5KP45A 5KP45CA 45 50 55.3 5 72.7 68.78 2 5KP48A 5KP48CA 48 53.3 58.9 5 77.4 64.6 2 5KP51A 5KP51CA 51 56.7 62.7 5 82.4 60.68 2 5KP54A 5KP54CA 54 60 66.3 5 87.1 57.41 2

Voltage 5V~190V 5000W Peak Power TVS Elektronische Bauelemente 24-May-2018 Rev. B Page 3 of 4 http://www.SeCoSGmbH.com/ Any changes of specification will not be informed individually. ELECTRICAL CHARACTERISTIC (T A=25° C unless otherwise noted) Part Number Reverse Standoff Voltage Breakdown Voltage @I T Test Current Max. Clamping Voltage VC @I PP Peak Pulse Current Reverse Leakage IR @V RRM Min. Max. Directional V R V BR V BR I T V C I PP I R Uni Bi V V V mA V A uA 5KP58A 5KP58CA 58 64.4 71.2 5 93.6 53.42 2 5KP60A 5KP60CA 60 66.7 73.7 5 96.8 51.65 2 5KP64A 5KP64CA 64 71.1 78.6 5 103 48.54 2 5KP70A 5KP70CA 70 77.8 86 5 113 44.25 2 5KP75A 5KP75CA 75 83.3 92.1 5 121 41.32 2 5KP78A 5KP78CA 78 86.7 95.8 5 126 39.68 2 5KP80A 5KP80CA 80 88.8 97.6 5 129.6 38.58 2 5KP85A 5KP85CA 85 94.4 104 5 137 36.5 2 5KP90A 5KP90CA 90 100 111 5 146 34.25 2 5KP100A 5KP100CA 100 111 123 5 162 30.86 2 5KP110A 5KP110CA 110 122 135 5 177 28.25 2 5KP120A 5KP120CA 120 133 147 5 193 25.91 2 5KP130A 5KP130CA 130 144 159 5 209 23.92 2 5KP140A 5KP140CA 140 155 171 5 226.8 22.05 2 5KP150A 5KP150CA 150 167 185 5 243 20.58 2 5KP160A 5KP160CA 160 178 197 5 259 19.31 2 5KP170A 5KP170CA 170 189 209 5 275 18.18 2 5KP180A 5KP180CA 180 200 220 5 291.6 17.15 2 5KP190A 5KP190CA 190 211 232 5 307.8 16.24 2 Notes: 1. Suffix 'A' denotes 5% tolerance device. 2. For Bi-Directional devices having V R of 10volts and under, the I R limit is double. 3. Add suffix 'CA' after part number to specify Bi-directional devices.

Voltage 5V~190V 5000W Peak Power TVS Elektronische Bauelemente 24-May-2018 Rev. B Page 4 of 4 http://www.SeCoSGmbH.com/ Any changes of specification will not be informed individually. TYPICAL CHARACTERISTICS