5KP5.0 MIC

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 4

Technical content

PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR E-mail: sales@cnmic.com Web Site: www.cnmic.com 5KP5.0 THRU 5KP110CA Stand-off Voltage 5.0 to 110 Volts 5KP5.0J THRU 5KP110CAJ Peak Pulse Power 5000 Watts

FEATURES

  • Plastic package has Underwriters Laboratory Flammability Classification 94V-O
  • Glass passivated junction or silastic guard junction (open junction)
  • 5000W peak pulse power capability with a 10/1000μs Waveform, repetition rate (duty cycle): 0.05%
  • Excellent clamping capability
  • Low incremental surge resistance
  • Fast response time: typically less than 1.0ps from 0 Volts to V(BR)
  • Devices with V(BR)＞10V, ID are typically less than 1.0μA
  • High temperature soldering guaranteed: 265℃/10 seconds, 0.375” (9.5mm) lead length, 51bs.(2.3kg) tension MECHANICAL DATA
  • Cass: molded plastic body over passivated junction
  • Terminals: Solder plated axial leads, solderable per MIL-STD-750, Method 2026
  • Polarity: The Color bands denotes the cathode, which is postitive with respect to the anode under normal TVS operation
  • Mounting Position: any
  • Weight: 0.07 ounces, 2.1 grams DEVICES FOR BIDRECTIONAL APPLICATIONS
  • For bidirectional use C or CA suffix for types 5KP5.0 thru 5KP110 (e.g. 5KP7.5CA, 5KP110CA).Electrical Characteristics apply in both directions.
  • Suffix A denotes ±5% tolerance device, No suffix A denotes ±10% tolerance device MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
  • Ratings at 25℃ ambient temperature unless otherwise specified Ratings Symbols Value Unit Peak Pulse power dissipation with a 10/1000μs waveform (NOTE1) PPPM Minimum5000 Watts Peak Pulse current with a 10/1000μs waveform (NOTE1) IPPM See Table 1 Amps Steady Stage Power Dissipation at TL=75℃ Lead lengths 0.375”(9.5mm)(Note2) PM(AV) 8.0 Watts Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load (JEDEC Method)(Note 3) IFSM 400.0 Amps Maximum forward voltage at 100.0A (NOTE 3) V F 3.5 Volts Operating Junction and Storage Temperature Range T J, TSTG 50 to +150 ℃ Notes: 1. Non-repetitive current pulse, per Fig.3 and derated above TA=25℃ per Fig.2 2. Mounted on copper pads ares of 0.8×0.8”(20×20mm) per Fig 5. 3. Measured on 8.3ms single half sine-wave or equivalent wave, duty cycle=4 pulses per minute maximum MIN 1.0(25.4) .360(9.1) .340(8.6) DIA.344(8.6) .360(9.1) Dimensions in inches and (millimeters) R-6 1.0(25.4) MIN .052(1.3) .048(1.2) DIA

PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR E-mail: sales@cnmic.com Web Site: www.cnmic.com 5KP5.0 THRU 5KP110CA Stand-off Voltage 5.0 to 110 Volts 5KP5.0J THRU 5KP110CAJ Peak Pulse Power 5000 Watts Breakdown Voltage V(BR)(Volts) (Note 1) Device Type MIN MAX Test Current at IT (mA) Stand-off Voltage VWM (Volts) Maximum Reverse Leakage at VWM ID (μA) Maximum Peak Pulse Current IPPM (Note 2) (Amps) Maximum Clamping Voltage at IPPM VC(Volts) Maximum Temperature Coefficient of V(BR) (%/℃) 5KP5.0A/J 6.4 7 50 5 2000 543 9.2 0.057 5KP7.0A/J 7.78 8.6 50 7 100 417 12 0.068 5KP8.0/J 8.89 10.9 5 8 150 333 15 0.075 5KP9.0/J 10 12.2 5 9 20 296 16.9 0.081 5KP9.0A/J 10 11.1 5 9 20 325 15.4 0.081 5KP10/J 11.1 13.6 5 10 15 266 18.8 0.084 5KP10A/J 11.1 12.3 5 10 15 294 17 0.084 5KP11/J 12.2 14.9 5 11 10 249 20.1 0.086 5KP11A/J 12.2 13.5 5 11 10 275 18.2 0.086 5KP12/J 13.3 16.3 5 12 10 227 22 0.088 5KP12A/J 13.3 14.7 5 12 10 251 19.9 0.089 5KP13/J 14.4 17.6 5 13 10 210 23.8 0.09 5KP13A/J 14.4 15.9 5 13 10 233 21.5 0.09 5KP14/J 15.6 19.1 5 14 10 194 25.8 0.092 5KP14A/J 15.6 17.2 5 14 10 216 23.2 0.092 5KP15/J 16.7 20.4 5 15 10 186 26.9 0.094 5KP15A/J 16.7 18.5 5 15 10 205 24.4 0.094 5KP16/J 17.8 21.8 5 16 10 174 28.8 0.096 5KP16A/J 17.8 19.7 5 16 10 192 26 0.096 5KP17/J 18.9 23.1 5 17 10 164 30.5 0.097 5KP17A/J 18.9 20.9 5 17 10 181 27.6 0.097 5KP18/J 20 24.4 5 18 10 155 32.2 0.098 5KP18A/J 20 22.1 5 18 10 171 29.2 0.098 5KP20/J 22.2 27.1 5 20 10 140 35.8 0.099 5KP20A/J 22.2 24.5 5 20 10 154 32.4 0.099 5KP22/J 24.4 29.8 5 22 10 127 39.4 0.1 5KP22A/J 24.4 26.9 5 22 10 141 35.5 0.1 5KP24/J 26.7 32.6 5 24 10 116 43 0.101 5KP24A/J 26.7 29.5 5 24 10 129 38.9 0.101 5KP26/J 28.9 35.3 5 26 10 107 46.6 0.101 5KP26A/J 28.9 31.9 5 26 10 119 42.1 0.101 5KP28/J 31.1 38 5 28 10 100 50.1 0.102 5KP28A/J 31.1 34.4 5 28 10 110 45.4 0.102 5KP30A/J 33.3 36.8 5 30 10 103 48.4 0.103 5KP33/J 36.7 44.9 5 33 10 84.7 59 0.104

PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR E-mail: sales@cnmic.com Web Site: www.cnmic.com 5KP5.0 THRU 5KP110CA Stand-off Voltage 5.0 to 110 Volts 5KP5.0J THRU 5KP110CAJ Peak Pulse Power 5000 Watts Electrical Characteristic at (TA =25℃ unless otherwise noted) TABLE 1 (Cont’d) Breakdown Voltage V(BR)(Volts) (Note 1) Device Type MIN MAX Test Current at IT (mA) Stand-off Voltage VWM (Volts) Maximum Reverse Leakage At VWM ID (μA) Maximum Peak Pulse Current IPPM (Note 2) (Amps) Maximum Clamping Voltage at IPPM VC(Volts) Maximum Temperature Coefficient of V(BR) (%/℃) 5KP36 40 48.9 5 36 10 77.8 64.3 0.104 5KP36A 40 44.2 5 36 10 86.1 58.1 0.104 5KP40 44.4 54.3 5 40 10 70 71.4 0.105 5KP43A 47.8 52.8 5 43 10 72 69.4 0.105 5KP45 50 61.1 5 45 10 62.3 80.3 0.106 5KP45A 50 55.3 5 45 10 68.8 72.7 0.106 5KP54 60 73.3 5 54 10 51.9 96.3 0.107 5KP54A 60 66.3 5 54 10 57.4 87.1 0.107 5KP58 64.4 78.7 5 58 10 48.5 103 0.107 5KP58A 64.4 71.2 5 58 10 53.4 94 0.107 5KP60 66.7 81.5 5 60 10 46.7 107 0.108 5KP60A 66.7 73.7 5 60 10 51.7 97 0.108 5KP64 71.1 96.9 5 64 10 43.9 114 0.108 5KP64A 71.1 78.6 5 64 10 48.5 103 0.108 5KP70 77.6 95.1 5 70 10 40 125 0.108 5KP70A 77.8 86 5 70 10 44.2 113 0.108 5KP75 83.3 102 5 75 10 37.3 134 0.108 5KP75A 83.3 92.1 5 75 10 41.3 121 0.108 5KP78 86.7 106 5 78 10 36 139 0.108 5KP78A 86.7 95.8 5 78 10 39.7 126 0.108 5KP85 94.4 115 5 85 10 33.1 151 0.108 5KP85A 94.4 104 5 85 10 36.5 137 0.11 5KP90 100 122 5 90 10 31.3 160 0.11 5KP90A 100 111 5 90 10 34.2 146 0.11 5KP100 111 136 5 100 10 27.9 179 0.11 5KP100A 111 123 5 100 10 30.9 162 0.11 5KP110 122 149 5 110 10 25.5 196 0.112 5KP110A 122 135 5 110 10 28.2 177 0.112 Notes: (1) V(BR) measured after IT applied for 300ms IT =square wave pulse or equivalent (2) Surge current waveform per Figure 3 and derate per Fig.2 (3) All terms and symbols are consistent with ANSI/IEEE C62.35

PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR E-mail: sales@cnmic.com Web Site: www.cnmic.com 5KP5.0 THRU 5KP110CA Stand-off Voltage 5.0 to 110 Volts 5KP5.0J THRU 5KP110CAJ Peak Pulse Power 5000 Watts RATING AND CHARACTERISTIC CURVES 5KP5.0/J THRU 5KP110A/J 100101 400 100 150 200 250 300 350 NUMBER OF CYCLES AT 60 Hz AMPERES PEAK FORWARD SURGE CURRENT,IFSM, JEDEC Method 8.3ms Single Half Since-Wave FIG.6 - MAXMIUM NON-REPETITIVE FORWARD SURGE CURRENT LT ,LEAD TEMPERATURE ℃ 25 50 75 100125 150 175200 WATTS STEADY STATE POWER DISSIPATION,PM(AV), FIG.5- STEADY STATE POWER DERATING CURVE WM STAND-OFF VOLTAGE,V MEASURED at MEASURED at ZERO BIAS Vsig = 50mVp-p f = 1.0MHz TJ=25 ℃ 1 10 100200 VOLTS(BR)V ,BREALDOWN VOLTAGE, CJ, JUNCTION CAPACITANCE, pF 100,000 10,000 1000 100 FIG.4- TYPICAL JUNCTION CAPACITANCE t, TIME, ms 0 1.02.0 3.0 4.0 150 100 0 2550 75 100125 150 175 200 100 PPIOR CURRENT( )PPPPEAK PULSE POWER ( ) DERATING IN PERCENTAGE % T , AMBIENT TEMPERATURE (℃)A FIG.2- PULSE DERATING CURVE 1.0 0.1 100 10ms0.1μs 1.0μs10 μs 100μs1.0ms FIG.1- PEAK PULSE POWER RATING CURVE PPM,P PEAK PULSE POWER, kW dt ,PULSE WIDTH, SEC Non-Repetitive Pulse Waveform TA=25 ℃ Shown in Figure 3 IPPM, PEAK PULSE CURRENT ,% FIG.3- PULSE WAVEFORM 60 Hz Resistive or induction load L = 0.375" (9.5mm) LEAD LENGTHS 0.8×0.8×0.040" (20×20mm) COPPER HEAT SINKS td tf=10use Peak Value lppm Half Value-lpp as Defined by R.E.A. 10/1000usec Waveform Pulse Width (td)is Defined as the Point Where the Peak Current Decays to 50% of lpp