5KPS UNSEMI

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 6

Technical content

Features

Description

Applications

Revision March 1,2022 Axial Lead Transient Voltage Suppressors www.unsemi.com.tw www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information.1/5  JEDEC R-6/P-600 Molded Plastic .  Glass passivated chip junction in R-6/P600 package .  6000 W peak pulse power capability with a 10/1000 us waveform, repetitive rate (duty cycle):0.01 % .  Low leakage .  Excellent clamping capability .  Very fast response time: typically less than 1.0ps from 0V to VBR min.  Plastic package has Underwriters Laboratory Flammability 94V-0 .  Halogen free and RoHS compliant .  Meet with ISO 7637-2,ISO 16750,etc .  High reliability application and automotive grade AEC Q101 qualifhed. Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting, especially for automotive load dump protection application. Uni-directional Bi-directional Functional Diagram Cathode Bi-directional Anode Uni-direction Parameter Symbol Value Unit Peak power dissipation with a 10/1000us waveform Power Dissipation on Infinite Heat Sink at TL=75°C Peak pulse current with a 10/1000us waveform Junction and storage temperature range Operating temperature range Peak forward surge current, 8.3ms single half sine-wave PPPM PD IPP TJ, TSTG TOP IFSM 6000 8.0 See Next Table - 55 to +175 - 55 to +150 500 W W A A

10 To 60V 6000W

Axial Lead Transient Voltage Suppressors Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information.2/5 5KPS Series VRWM (V) Breakdown Voltage VBR Maximum Reverse Leakage IR @VRWM (uA) Maximum Reverse Surge Current IPP¹ (A) Maximum Clamping Voltage VC @IPP (V) Test Current IT (mA) Min (V) Max (V)Uni 5KP10CAS 5KP11CAS 5KP12CAS 5KP13CAS 5KP14CAS 5KP15CAS 5KP16CAS 5KP18CAS 5KP20CAS 5KP22CAS 5KP24CAS 5KP26CAS 5KP28CAS 5KP30CAS 5KP33CAS 5KP36CAS 5KP40CAS 5KP43CAS 5KP48CAS 5KP54CAS 5KP58CAS 5KP60CAS 5KP10AS 5KP11AS 5KP12AS 5KP13AS 5KP14AS 5KP15AS 5KP16AS 5KP18AS 5KP20AS 5KP22AS 5KP24AS 5KP26AS 5KP28AS 5KP30AS 5KP33AS 5KP36AS 5KP40AS 5KP43AS 5KP48AS 5KP54AS 5KP58AS 5KP60AS 10.0 11.0 12.0 13.0 14.0 15.0 16.0 18.0 20.0 22.0 24.0 26.0 28.0 30.0 33.0 36.0 40.0 43.0 48.0 54.0 58.0 60.0 11.80 12.20 13.30 14.40 15.60 16.70 17.80 20.00 22.20 24.40 26.70 28.90 31.10 33.30 36.70 40.00 44.40 49.00 53.30 60.00 64.40 68.40 13.00 13.50 14.70 15.90 17.20 18.50 19.70 22.10 24.50 26.90 29.50 31.90 34.40 36.80 40.60 44.20 49.10 54.20 58.90 66.30 71.20 75.60 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 17.0 18.2 19.9 21.5 23.2 24.4 26.0 29.2 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1 64.5 69.4 77.4 87.1 93.6 96.8 Ratings and Characteristic Curves (TA=25°C unless otherwise noted) 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 350.0 327.0 300.0 277.0 257.0 245.0 229.0 204.0 184.0 168.0 154.0 142.0 131.0 123.0 112.0 103.0 92.50 86.00 77.00 68.50 64.00 61.50 Electrical Characteristis (@ 25°C Unless Otherwise Specified ) Note:(1)Surge waveform: 10/1000μs Figure 2 - Pulse Derating Curve TA-Ambient temperature(°C) 0 25 50 75 100 125 150 175 200 100 Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage % Figure 1 - Pulse Waveform t - Time (ms) 10/1000µsec. Waveform as defined by R.E.A Half Value IPPM (IPPM/2) Peak Value IPPM tr=10µsec TJ=25°C Pulse Width(td) is defined as the point where the peak current decays to 50% of IPPM 0 1.0 2.0 3.0 4.0 100 150 IPPM - Peak Pulse Current, % IRSM

Axial Lead Transient Voltage Suppressors Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information.3/5 5KPS Series Us(V) Td（ms ） Ri（Ω ） NUMBER OF PULSE 12V Ⅳ 87 400 1 10 pulse 24V Ⅳ 174 350 4 10 pulse 试验脉冲 5a Ratings and Characteristics Curves (TA=25°C unless otherwise noted) Load dump ratings are tested on PRIMA ISO7637-P5a UA U Us Td Tr T 0.9Us 0.1Us Figure 4 - I-V Curve CharacteristicsFigure 3 - I-V Curve Characteristics V VC VBR VR IR VFIT IPP Uni-directional VVC VBR VR VCVBRVR IR IR IT IT IPP IPP Bi-directional

Axial Lead Transient Voltage Suppressors Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information.4/5 5KPS Series A B C D Min Max MaxMin Inches Millimeters 1.000 0.340 0.048 0.340 0.360 0.052 0.360 25.40 8.64 1.22 8.64 9.14 1.32 9.14 Part Numbering K P C Axxx5 R6/P600 S pd-Lead–free assembly 150°C 200°C 60 -180 Seconds 3°C/second max 5°C/second max 217°C 60 -150 Seconds 260 +0/-5°C 20 - 40 Seconds 6°C/second max 8 minutes Max 280°C Reflow Condition Pre Heat -Temperature Min (Ts(min)) -Temperature Max (Ts(max)) - Time (min to max) (TS) Average ramp up rate ( Liquidus Temp TL) to peak TS(max) to TL - Ramp-up Rate Reflow - Temperature (TL) (Liquidus) - Time (min to max) (TS) Peak Temperature (TP) Do not exceed Time 25°C to peak Temperature (TP) Time within 5°C of actual peak Temperature (TP) Ramp-down Rate Super 5% VBR Voltage Tolerance Bi-Directional VR Voltage Series Ramp up TS(MAX) TS(MIN) Ramp down Time Temperature TP TL Critical Zone TL to TP TL Time 25℃ to peak Ts Preheat Tp

Axial Lead Transient Voltage Suppressors Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information.5/5 5KPS Series

Ordering Information

Part Number Component Package Quantity Packaging Option Packaging Dimensions Unit: Inches (Millimeters) 0.40±0.020 (10.16±0.508) 2.56 (65.00) 0.25 (6.35)

Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information. Disclaimer ROHS UNSEMI RESERVES THE RIGHT TO MAKE CHANGE ON OUR PRODUTS , PRODUCTS SPECIFICATION AND DATA WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. UN SEMICONDUCTOR LIMITED its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “UNSEMI”)does not give any representations or warranties for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. In no event shall UNSEMI be liable for any indirect, incidental, punitive, special or consequential damages (including any and all implied warranties, warranties of fitness for particular purpose, non-infringement and merchantability.) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Statements regarding the suitability of products for certain types of applications are based on UNSEMI knowledge of typical requirements that are often placed on UNSEMI products in generic applications. Such statements are not binding, statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify UNSEMI's terms and conditions of purchase, including but not limited to the warranty expressed therein. Unless otherwise agreed in writing, UNSEMI product is not designed, authorized or warranted to be suitable for use in medical life-saving, or life-sustaining application , nor in applications where failure or malfunction of a UNSEMI product can reasonably be expected to result in personal injury, death or severe property or environmental damage. UNSEMI and its suppliers accept no liability for inclusion or use of UNSEMI products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk. All referenced brands, product names, service names and trademarks are the property of their respective owners.