571-SERIES ETC
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
1.94 15.3 2.15 HOLE TO ACCEPT 4mm PLUG 4.1 23.3 OVERALL LENGTH 9.8 20.9 12.4 CUTOUT 9.5 PANEL 15.3 5.5 10.5 7.5 10mm STACKING PITCH PCB PIN LENGTH DIMENSIONS AN INSULATED 4mm SOCKET, FOR DIRECT MOUNTING ONTO PRINTED CIRCUIT BOARDS. GROOVES IN THE OUTER ACETAL HOUSING PROVIDE STACKING ALIGNMENT FOR BOARD SPACE SAVING. PCB LAYOUT TO MOUNTING FACE
90 PCB MOUNTED INSULATED SOCKET-SINGLE
Component complies with 260 deg J-STD-075 Non-IC Electronic Components Standard Met PSL W4 Insulant Acetal Pin Brass, Silver Plate Bush Brass, Silver Plate Amps 10A Working Voltage 50V Contact Resistance 10mΩ Maximum Temperature RTI + 110°C Minimum Temperature -25°C Recommended Temperature 10A @ 55°C Voltage Breakdown 5000V Recomended Conductor size 1.5mm² Colours Order Code Black 571-0100 Blue 571-0200 Brown 571-0300 Green 571-0400 Red 571-0500 White 571-0600 Yellow 571-0700 TITLE 571-SERIES UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETRES LINEAR & RADIAL TOLERANCE: NO DECIMAL PLACES
1 DECIMAL PLACE
2 DECIMAL PLACES
ANGULAR TOLERANCE: AUTHOR SB THIRD ANGLE PROJECTION SCALE 2:1 A4 SHEET 1 OF 1 SEE TABLE SEE TABLE MATERIAL FINISH IF IN DOUBT ASK! DO NOT SCALE DRAWING!PROPRIETARY AND CONFIDENTIAL: THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF ALPHA 3 MANUFACTURING. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF ALPHA 3 MANUFACTURING IS PROHIBITED. DEM Manufacturing is a division of Alpha 3 Manufacturing LTD DEM Manufacturing, Deltron Emcon House, Hargreaves Way, Sawcliffe Ind. Park, Scunthorpe, North Lincolnshire, DN15 8RF, UK D E C BB C D E WC +44(0)1724 273200 www.dem-uk.com THE FINISHED PRODUCT SHOULD BE CLEAN AND FREE FROM ALL LIQUIDS AND DEBRIS. SURFACES SHOULD BE OF UNIFORM APPEARANCE FREE FROM SHARP EDGES, BURRS AND CORROSION GENERAL SPECIFICATION PART VERSIONISSUE/REV. FILE APPROVER RELEASED SINGLE 4mm PCB SOCKET 017 EDIT DATE EDITOR DT
20 Feb 2019
A 3 752 641 A REV DATE ECN NUMBER ECR COMMENT 017 20 Feb 2019 C04140 Amend leg dimension 5mm to 5.5mm grid ref 3E 016 12 Sep 2018 C03988 BORDER UPDATED