567502 FESTO
Document overview
- PDF pages: 2
Technical content
Page 1
Air solenoid valve MHJ10-S-2,5-HF
Part number: 567502

Data sheet
| Feature | Value |
| Valve function | 2/2, closed, monostable |
| Actuation type | Electrical |
| Width | 10 mm |
| Standard nominal flow rate | 160 l/min |
| Pneumatic working port | Sub-base |
| Operating voltage | 24V DC |
| Operating pressure | 0.05 MPa ... 0.6 MPa |
| Operating pressure | 0.5 bar ... 6 bar |
| Structural design | Poppet valve without return spring |
| Reset method | Pneumatic spring |
| Degree of protection | IP65 |
| Certification | RCM compliance mark |
| KC characters | KC EMC |
| CE marking (see declaration of conformity) | As per EU EMC directive |
| Width dimension | 10.5 mm |
| Type code | MHJ10 |
| Operating conditions to DIN VDE 0580 | S3 50% 20min. for single pneumatic valve S3 25% 20 min for block assembly |
| Information on operation | Power supply unit must be able to supply at least 1.7 A without voltage drop. Do not operate without flow. |
| Sealing principle | Hard |
| Mounting position | Any |
| Manual override | None |
| Type of control | Direct |
| Flow direction | Non-reversible |
| Symbol | 00992259 |
| Reverse polarity protection | for operating voltage |
| Additional functions | Spark suppression Holding current reduction with energy recovery Safety shut-down |
| b-value | 0.36 |
| C value | 0.66 l/sbar |
| Max. switching frequency | 500 Hz |
| Switching time on at 4 bar and 24 V in new condition | 1.2 ms |
| Switching time off at 4 bar and 24 V in new condition | 0.6 ms |
| Switching time on at 0.5 bar and 24 V in new condition | 1 ms |
11/15/21 - Subject to change - Festo AG & Co. KG
1/2
Page 2
| Feature | Value |
| Switching time off at 0.5 bar and 24 V in new condition | 0.8 ms |
| Switching time on at 6 bar and 24 V in new condition | 1.3 ms |
| Switching time off at 6 bar and 24 V in new condition | 0.6 ms |
| Tolerance for switching time off | +15 %/-25 % |
| Tolerance for ON switching time | +/-15 % |
| DC operating voltage range | 21.6 V ... 26.4 V |
| Input resistance | 34 kOhm |
| Coil characteristics | 24 V DC: low-current phase 3.2 W, high-current phase 14.5 W |
| Trigger signal range DC | 3 V ... 30 V |
| Note on input current | Linear increase 0.09-0.44 mA for a trigger signal of 3-15 V 0.44-15.44 mA for a trigger signal of 15-30 V |
| Permissible voltage fluctuations | +/- 10 % |
| Operating medium | Compressed air as per ISO 8573-1:2010 [7:4:4] |
| Information on operating and pilot media | Operation with oil lubrication not possible |
| Restricted ambient and media temperature | Depending on the switching frequency (see diagram) |
| Corrosion resistance class (CRC) | 2 - Moderate corrosion stress |
| Storage temperature | -20 °C ... 50 °C |
| Permissible solenoid surface temperature | 120 °C |
| Temperature of medium | -5 °C ... 60 °C |
| Ambient temperature | -5 °C ... 60 °C |
| Max. tightening torque for valve mounting | 0.7 Nm |
| Product weight | 75 g |
| Electrical connection | 3-wire Cable |
| Cable length | 2.5 m |
| Type of mounting | On sub-base |
| Pneumatic connection 1 | Sub-base |
| Pneumatic connection 2 | Sub-base |
| Note on materials | RoHS-compliant |
| Seals material | HNBR |
| Housing material | PA-reinforced PPS-reinforced |
| Material of cable sheath | PUR |
| Material of screws | Steel |
11/15/21 - Subject to change - Festo AG & Co. KG
2/2