HSW-16-AP-SD-AW FESTO

Document overview

  • PDF pages: 2

Technical content

Page 1

Pick and place machine HSW-16-AP-SD-AW

Part number: 562564

PDF page 1 diagram

Data sheet

Feature Value
Working stroke 20 mm ... 35 mm
Size 16
Max. linear stroke at 90° swivel angle 175/175 mm
Maximum wait position module Z-stroke 25 mm
Z-stroke 80 mm ... 100 mm
Type code HSW
Cushioning Pneumatic shock absorber at both ends Soft characteristic curve
Mounting position Any
Design Linear guide plus ball bearing Quarter turn actuator Positively driven motion sequence
Position sensing For proximity sensor
Operating pressure 4 bar ... 8 bar
Minimum cycle time 1 s
Repetition accuracy end positions +/-0.02 mm
Operating medium Compressed air as per ISO 8573-1:2010 [7:-:-]
Information on operating and pilot media Operation with oil lubrication possible (required for further use)
Ambient temperature 0 °C ... 60 °C
Max. torque Mx 2.5 Nm
Max. torque My 2.5 Nm
Max. torque Mz 2.5 Nm
Max. payload 1.5 kg
Maximum process force in y direction 50 N
Theoretical force at 6 bar 55 N
Product weight 5800 g
Type of mounting Via through-hole and centering sleeve
Wait position pneumatic connection M5
Pneumatic connection M5
Stops material High-alloy steel
Cover material Wrought aluminum alloy Anodized
Spring pressure piece material High-alloy steel
Base plate material Wrought aluminum alloy Anodized
Retaining bracket material Wrought aluminum alloy Anodized

2/22/21 - Subject to change - Festo AG & Co. KG

1/2

Page 2

Feature Value
Cross guide material Tempered steel
Swivel lever material Case-hardened steel Burnished
Link material Case-hardened steel Hardened
Sensor rail material Wrought aluminum alloy Anodized
Fixed link material Wrought aluminum alloy Anodized
Setting screw material High-alloy steel

2/22/21 - Subject to change - Festo AG & Co. KG

2/2