56230 SCHNEIDER
Document overview
- PDF pages: 3
Technical content
Page 1
56230
Product data sheet
residual current protection relay, Vigirex RH10P,
Characteristics
30 mA, 220/240 VAC 50/60 Hz, front panel
mounting
Product availability : Non-Stock - Not normally stocked in distribution facility
Price\* : 1,607.00 USD

Main
Range
Vigirex
Range of product
Vigirex
Device short name
RH10P
Product or component type
Residual current protection relay
Current sensors compatibility
TOA earth leakage current sensor A earth leakage current sensor L earth leakage current sensor
Relay application
Residual current protection relay
Complementary
1000 V - AC at 50/60 Hz (maximum)
Monitored distribution system
1000 V - AC at 400 Hz (maximum)
Earthing system
TN-S TT IT
[Us] rated supply voltage
220...240 V AC 50/60 Hz
Power consumption in VA
4 VA Earth fault current internal measurement, range: 80...100 %
Type of measurement Residual earth-leakage time delay
Instantaneous 0.03 A
adjustment type Test function
Remote test Local
Monitoring
Electronics (continuous) Power supply (continuous) Relay/sensor link (continuous)
[Ithe] conventional enclosed thermal
8 A
current
\* Price is “List Price” and may be subject to a trade discount – check with your local distributor or retailer for actual price. Dec 10, 2020
Page 2
Minimum load
10 mA at 12 V
Cut-out dimensions
68 x 68 mm
Net Weight
0.66 lb(US) (0.3 kg) IP40 on front face: conforming to EN/IEC 60529
IP degree of protection
IP30 on side parts: conforming to EN/IEC 60529 IP20 on connection terminals: conforming to EN/IEC 60529
IK degree of protection
IK07 conforming to EN 50102 Fire resistance conforming to IEC 60695-2-1
Mechanical robustness
IK protection 2 joules: IK07 conforming to EN 50102 Vibrations 13.2...100 Hz: 0.7 g Vibrations 2...13.2 Hz: +/- 1 mm
Earth-leakage protection class
Class A Class AC
Overvoltage category
IV
Tamperproof of settings
Protected by sealable cover
Mounting support
Panel
Height
2.83 in (72 mm)
Width
2.83 in (72 mm)
Depth
3.07 in (78 mm) Auxiliary power supply: terminal block cable(s) 0.2…2.5 mm² flexible AWG 24...AWG 12
Connections - terminals
Auxiliary power supply: terminal block cable(s) 0.2…2.5 mm² rigid AWG 24...AWG 12 Auxiliary power supply: terminal block cable(s) 0.25…2.5 mm² flexible AWG 24...AWG 12 Fault: terminal block cable(s) 0.2…2.5 mm² flexible AWG 24...AWG 12 Fault: terminal block cable(s) 0.2…2.5 mm² rigid AWG 24...AWG 12 Fault: terminal block cable(s) 0.25…2.5 mm² flexible AWG 24...AWG 12 Relay test and fault reset: terminal block cable(s) 0.2…2.5 mm² flexible AWG 24...AWG 12 Relay test and fault reset: terminal block cable(s) 0.2…2.5 mm² rigid AWG 24...AWG 12 Relay test and fault reset: terminal block cable(s) 0.25…2.5 mm² flexible AWG 24...AWG 12 Sensor: terminal block cable(s) 0.2…2.5 mm² flexible AWG 24...AWG 12
Sensor: terminal block cable(s) 0.2…2.5 mm² rigid AWG 24...AWG 12 Sensor: terminal block cable(s) 0.25…2.5 mm² flexible AWG 24...AWG 12 Voltage presence: terminal block cable(s) 0.2…2.5 mm² flexible AWG 24...AWG 12 Voltage presence: terminal block cable(s) 0.2…2.5 mm² rigid AWG 24...AWG 12 Voltage presence: terminal block cable(s) 0.25…2.5 mm² flexible AWG 24...AWG 12
Wire stripping length
Auxiliary power supply: 7 mm Fault: 7 mm Relay test and fault reset: 7 mm Sensor: 7 mm Voltage presence: 7 mm
Tightening torque
Auxiliary power supply: 0.6 N.m Fault: 0.6 N.m Relay test and fault reset: 0.6 N.m Sensor: 0.6 N.m Voltage presence: 0.6 N.m
Environment
Ambient air temperature for operation
-31…158 °F (-35…70 °C)
Ambient air temperature for storage
-67…185 °F (-55…85 °C)
Relative humidity
95 % at 55 °C
Pollution degree
3 conforming to IEC 60664-1 Conducted and radiated emissions: , B, conforming to CISPR 11
Electromagnetic compatibility
Conducted radio-frequency immunity test: , 3, conforming to IEC 61000-4-6 Electrostatic discharge immunity test: , 4, conforming to IEC 61000-4-2 High-energy conducted susceptibility: , 4, conforming to IEC 61000-4-5 Low-energy conducted susceptibility: , 4, conforming to IEC 61000-4-4 Radiated susceptibility: , 3, conforming to IEC 61000-4-3
Electrical shock protection class
Class II
Ordering and shipping details
01101 - NF..E COMPACT NS IEC CIRCUIT BREAKERS, SWITCHES & MCP'S
Category Discount Schedule
DE2
GTIN
Page 3
Nbr. of units in pkg.
1
Package weight(Lbs)
1.5 lb(US) (0.68 kg)
Returnability
No
Country of origin
FR
Packing Units
Package 1 Height
0.04 in (0.100 cm)
Package 1 width
2.76 in (7.000 cm)
Package 1 Length
4.33 in (11.000 cm)
Offer Sustainability
Sustainable offer status
Green Premium product WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
California proposition 65 REACh Regulation
REACh Declaration
EU RoHS Directive
Compliant EU RoHS Declaration
Mercury free
Yes
RoHS exemption information
Yes
China RoHS Regulation
China RoHS declaration Product out of China RoHS scope. Substance declaration for your information.
Environmental Disclosure
Product Environmental Profile
Circularity Profile
End of Life Information The product must be disposed on European Union markets following specific waste collection and
WEEE
never end up in rubbish bins.
Contractual warranty
Warranty
18 months