55A0113

55A0113 MACOM

Document overview

• Manufacturer or author: Provided By digicamel.com
• PDF pages: 2

Technical content

This specification sheet forms a part of the latest issue of Raychem Specification 55A. Q 55A01 13 Date Revision SPECIFICA TION CONTROL DRAWING PART NUMBER PART NUMBER WIRE SIZE (AWG) CONDUCTOR STRANDING (number x AWG) MANDREL DIAMETER (inch) (± 3%) 7 x 38 7 x 36 19 x 38 19 x 36 19 x 34 19 x 32 19 x 30 19 x 29 19 x 27 37 x 28 37 x 26 133 x 29 .013 .016 .020 .025 .031 .039 .049 .055 .069 .089 .113 .173 DIAMETER OF STRANDED CONDUCTOR (in.) TABLE II. PERFORMANCE DETAILS CONDUCTOR - NICKEL-COATED COPPER INSULATON - RADIATION-CROSSLINKED, MODIFIED ETFE WIRE, RADIATION-CROSSLINKED, MODIFIED, ETFE-INSULATED, NICKEL-COATED COPPER, LIGHTWEIGHT MAXIMUM WEIGHT (lbs/1000 ft.) .66 .91 1.4 2.0 2.8 4.3 6.5 8.3 13.0 19.7 32.2 56.5 .024 ± .002 .027 ± .002 .032 ± .002 .037 ± .002 .043 ± .002 .050 ± .002 .060 ± .002 .068 ± .002 .085 ± .003 .103 ± .003 .128 ± .006 .188 ± .008 DIAMETER (in.) MAXIMUM RESISTANCE AT 20°C (ohms/1000 ft.) FINISHED WIRE TABLE I. CONSTRUCTION DETAILS MAXIMUMMINIMUM .011 .014 .018 .023 .029 .037 .046 .052 .065 .084 .106 .158 55A0113-30-* 55A0113-28-* 55A0113-26-* 55A0113-24-* 55A0113-22-* 55A0113-20-* 55A0113-18-* 55A0113-16-* 55A0113-14-* 55A0113-12-* 55A0113-10-* 55A0113- 8-* BEND TESTING WEIGHT (lb) (± 3%) IMMERSION, LIFE CYCLE AND ACCELERATED AGING COLD BEND .500 .500 .500 1.00 1.00 1.00 1.00 1.00 3.00 3.00 3.00 6.00 .125 .125 .125 .250 .375 .500 .500 .750 1.00 1.50 1.50 4.00 .375 .375 .500 .500 .750 .750 1.00 1.00 1.50 2.00 3.00 4.00 COLD BEND IMMERSION, LIFE CYCLE AND ACCELERATED AGING .250 .250 .375 .375 .500 .500 .500 .750 1.00 1.50 2.00 3.00 55A0113-30-* 55A0113-28-* 55A0113-26-* 55A0113-24-* 55A0113-22-* 55A0113-20-* 55A0113-18-* 55A0113-16-* 55A0113-14-* 55A0113-12-* 55A0113-10-* 55A0113- 8-* 110.7 67.9 42.2 25.9 16.0 9.77 6.10 4.76 3.00 1.98 1.24 .694 10-26-04 Page 1 of 2 DIMENSIONS ARE IN INCHES, AND UNLESS OTHERWISE DESIGNATED ARE NOMINAL. R Wire & Cable

501 Oakside Avenue

Redwood City, CA 94063-3800 Phone: 1-800-227-8816 Fax: 1-650-361-6297 THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN. REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID. Tyco Electronics also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer. Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice. 1/ COLORS AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. OTHER CODES AND SUFFIXES MAY BE ADDED TO THE PART NUMBER, AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER.

SPECIFICATION CONTROL DRAWING SCD Number Page 2 of 2 Revision 55A0113 TEMPERATURE RATING: 200°C, Maximum continuous conductor temperature VOLTAGE RATING: 600 volts (rms) at sea level ACCELERATED AGING (CROSSLINKING PROOF): 300 ± 3°C for 7 hours BLOCKING: 230 ± 3°C for 24 hours COLOR: white preferred CONCENTRICITY: 70% (minimum) FLAMMABILITY: Procedure 1,3 seconds (maximum); 3 in. (maximum);no flaming of facial tissue HUMIDITY RESISTANCE: Insulation Resistance, 5000 megohms for 1000 ft. (minimum) for AWG 30 - 10 3000 megohms for 1000 ft. (minimum) for AWG 8 IDENTIFICATION, COLOR STRIPING AND BAND DURABILITY: 125 cycles (250 strokes) (minimum), 500 g weight IMMERSION: Diameter increase 5% (maximum); no cracking, no dielectric breakdown INSULATION ELONGATION AND TENSILE STRENGTH: Elongation, 75% (minimum) Tensile strength, 5000 lbf/in² (minimum) INSULATION FLAWS: Spark test, 5.7 kV (rms) at 3 kHz Impulse Dielectric Test, 8.0 kV (peak) INSULATION RESISTANCE: 5000 megohms for 1000 ft. (minimum) for AWG 30 - 10 3000 megohms for 1000 ft. (minimum) for AWG 8 INSULATION THICKNESS: 0.005 in. (minimum) LIFE CYCLE: 230 ± 3°C for 500 hours LOW TEMPERATURE-COLD BEND: -65 ± 3°C for 4 hours SHRINKAGE: 230 ± 3°C, for 6 hours, 0.125 in. (maximum) in 12 in. SMOKE TEST: 250 ± 5°C. No visible smoke SURFACE RESISTANCE: 500 megohms-in. (minimum), both readings THERMAL SHOCK RESISTANCE: 200 ± 3°C, 0.060 in. (maximum) VOLTAGE WITHSTAND TEST (Post Environmental): 2500 volts (rms), 60 Hz WRAP TEST: 313 ± 3°C for 2 hours PART NUMBER: The "*" in the part numbers on page 1 shall be replaced by a color code designator. 1/ Example:AWG 22, white: 55A0113-22-9 AWG 22, white with black stripe: 55A0113-22-90 1/ See footer section on page 1 WIRE RATINGS AND ADDITIONAL REQUIREMENTS Q