547220 FESTO

Document overview

  • PDF pages: 2

Technical content

Page 1

Air solenoid valve VSVA-B-M52-MH-A1-3AC1

Part number: 547220

PDF page 1 diagram

Data sheet

Feature Value
Valve function 5/2, monostable
Actuation type Electrical
Valve size 26 mm
Standard nominal flow rate 1100 l/min
Pneumatic working port Sub-base, size 26 mm as per ISO 15407-1 Size 01 sub-base as per VDMA 24563 G1/4
Operating voltage 230V AC
Operating pressure 0.3 MPa ... 1 MPa
Operating pressure 3 bar ... 10 bar
Design Piston gate valve
Reset method Mechanical spring
CE marking (see declaration of conformity) As per EU low voltage directive
Degree of protection IP65 NEMA 4
Nominal width 9 mm
Type code VSVA
Exhaust air function With flow control option
Sealing principle Soft
Mounting position Any
Conforms to standard ISO 15407-1 VDMA 24563
Manual override Non-detenting
Type of control Pilot-controlled
Pilot air supply port Internal
Flow direction Non-reversible
Symbol 00991003
Lap Overlap
Signal status display LED
Pilot pressure MPa 0.3 MPa ... 1 MPa
Pilot pressure 3 bar ... 10 bar
Flow rate of pneumatic valve 1400 l/min
Flow rate of pneumatic valve on individual sub-base 1100 l/min
Optimized flow rate of pneumatic valve pneumatically concatenated flow 1100 l/min
Switching time off 56 ms
On switching time 26 ms
Duty cycle 100%

8/24/21 - Subject to change - Festo AG & Co. KG

1/2

Page 2

Feature Value
Coil characteristics 230 V AC: 50/60 Hz, initial power 2.9 VA, holding power 2.1 VA
Permissible voltage fluctuations -15 % / +10 %
Operating medium Compressed air as per ISO 8573-1:2010 [7:4:4]
Information on operating and pilot media Operation with oil lubrication possible (required for further use)
Vibration resistance Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
Shock resistance Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
Corrosion resistance class (CRC) 0 - No corrosion stress
Temperature of medium -5 °C ... 50 °C
Relative air humidity 0 - 90 %
Noise level 85 dB(A)
Pilot medium Compressed air as per ISO 8573-1:2010 [7:4:4]
Ambient temperature -5 °C ... 50 °C
Max. tightening torque for valve mounting 2 Nm
Product weight 180 g
Electrical connection Form C With PE conductor as per DIN EN 175301-803
Type of mounting On sub-base
Auxiliary pilot air port 12 Sub-base, size 26 mm as per ISO 15407-1
Auxiliary pilot air port 14 Sub-base, size 26 mm as per ISO 15407-1
Pilot exhaust air port 82/84 Not ducted as per standard Ducted
Pneumatic connection 1 Sub-base, size 26 mm as per ISO 15407-1
Pneumatic connection 2 Sub-base, size 26 mm as per ISO 15407-1
Pneumatic connection 3 Sub-base, size 26 mm as per ISO 15407-1
Pneumatic connection 4 Sub-base, size 26 mm as per ISO 15407-1
Pneumatic connection 5 Sub-base, size 26 mm as per ISO 15407-1
Pilot interface as per ISO 15218
Note on materials RoHS-compliant
Seals material HNBR NBR
Housing material Die-cast aluminum
Material of screws Steel Galvanized

8/24/21 - Subject to change - Festo AG & Co. KG

2/2