HSW-10-AP FESTO

Document overview

  • PDF pages: 2

Technical content

Page 1

Pick and place machine HSW-10-AP

Part number: 540222

Data sheet

Feature Value
Working stroke 9 mm ... 15 mm
Size 10
Max. linear stroke at 90° swivel angle 90/90 mm
Z-stroke 80 mm ... 100 mm
Type code HSW
Cushioning Pneumatic shock absorber at both ends Soft characteristic curve
Mounting position Any
Design Linear guide plus ball bearing Quarter turn actuator Positively driven motion sequence
Position sensing For proximity sensor
Operating pressure 4 bar ... 8 bar
Minimum cycle time 0.6 s
Repetition accuracy end positions +/-0.02 mm
Operating medium Compressed air as per ISO 8573-1:2010 [7:-:-]
Information on operating and pilot media Operation with oil lubrication possible (required for further use)
Ambient temperature 0 °C ... 60 °C
Max. torque Mx 0.6 Nm
Max. torque My 0.6 Nm
Max. torque Mz 0.6 Nm
Max. payload 0.5 kg
Maximum process force in y direction 30 N
Theoretical force at 6 bar 30 N
Product weight 1250 g
Type of mounting Via through-hole and centering sleeve
Pneumatic connection M3
Note on materials Free of copper and PTFE
Stops material High-alloy steel
Spring pressure piece material High-alloy steel
Base plate material Wrought aluminum alloy Anodized
Retaining bracket material Wrought aluminum alloy Anodized
Cross guide material Tempered steel
Swivel lever material Case-hardened steel Burnished

2/22/21 - Subject to change - Festo AG & Co. KG

1/2

Page 2

Feature Value
Link material Case-hardened steel Burnished
Sensor rail material Wrought aluminum alloy Anodized
Fixed link material Wrought aluminum alloy Anodized
Setting screw material High-alloy steel

2/22/21 - Subject to change - Festo AG & Co. KG

2/2