OVEM-05-H-B-QO-OE-N-2P FESTO

Document overview

  • PDF pages: 3

Technical content

Page 1

Vacuum generator OVEM-05-H-B-QO-OE-N-2P

Part number: 538825

PDF page 1 diagram

Data sheet

Feature Value
KC characters KC EMC
Nominal width of Laval nozzle 0.45 mm
Width dimension 20 mm
Type code OVEM
Muffler construction type Open
Mounting position Any
Ejector characteristics High vacuum Standard
Grade of filtration 40 µm
Manual override Non-detenting Additionally via operating buttons
Integrated function Ejector pulse valve, electric Flow control Shut off valve, electric Compressed air filter Air saving function, electrical Non-return valve Pneumatic muffler open Vacuum switch
Design Modular
Short-circuit protection yes
Measured variable Relative pressure
Measuring principle Piezoresistive
Switching element function N/C contact N/O contact
Switching function Window comparator Threshold value comparator
Symbol 00992102
Valve function Open
Reverse polarity protection for all electrical connections
Switching input to standard IEC 61131-2
Display type 4-character alphanumeric Back-lit LCD
Display range -0.999 bar ... 0 bar
Displayable unit(s) bar
Setting range threshold value -0.999 bar ... 0 bar
Setting range hysteresis -0.9 bar ... 0 bar
Setting options Via display and pushbuttons
Switching position indication LCD

1/3

Page 2

Feature Value
Switching status indication Optical
Operating pressure 2 bar ... 8 bar
Operating pressure for max. vacuum 5.1 bar
Max. vacuum 93 %
Nominal operating pressure 6 bar
Max. suction rate with respect to atmosphere 6 l/min
Air supply time at nominal operating pressure 2 s
DC operating voltage range 20.4 V ... 27.6 V
Duty cycle 100%
Inductive protective circuit Adapted to MZ, MY and ME coils
Insulation voltage 50 V
Idle current <70 mA
Max. output current 100 mA
Residual current 0.1 mA
Switching output 2xPNP
Voltage drop ≤1.5 V
Coil characteristics 24 V DC: low-current phase 0.3 W, high-current phase 2.55 W
Surge resistance 0.8 kV
Overload protection Available
Contamination level 3
Operating medium Compressed air as per ISO 8573-1:2010 [7:4:4]
Information on operating and pilot media Operation with oil lubrication not possible
CE marking (see declaration of conformity) As per EU EMC directive
Corrosion resistance class (CRC) 2 - Moderate corrosion stress
Temperature of medium 0 °C ... 50 °C
Relative air humidity 5 - 85 %
Noise level at nominal operating pressure 51 dB(A)
Degree of protection IP65
Protection class III
Ambient temperature 0 °C ... 50 °C
Certification RCM compliance mark c UL us - Listed (OL)
Max. tightening torque 0.8 Nm with internal thread 2.5 Nm with through-hole
Product weight 325 g
Pressure measuring range -1 bar ... 0 bar
Accuracy in ± % FS 3 %FS
Reproducibility, switching value FS 0.6 %
Input switching logic PNP (positive switching)
Electrical connection 5-pin M12x1 Plug
Type of mounting With through-hole With internal thread With accessories
Pneumatic connection 1 QS-6
Pneumatic connection 3 Pneumatic muffler integrated
Vacuum connection QS-6
Note on materials Contains paint-wetting impairment substances RoHS-compliant
Seals material NBR
Female nozzle material POM
Compressed air filter material Fabric PA Sintered steel

2/3

Page 3

Feature Value
Material of filter housing PA-reinforced
Housing material Die-cast aluminum PA-reinforced
Material of adjusting screw Steel
Muffler material Wrought aluminum alloy PU foam
Material of screws Steel
Inspection window material PA
Material of plug housing Brass, nickel-plated
Material of pin contacts Brass, gold-plated
Material of pins Steel
Material of jet nozzle Wrought aluminum alloy
Material of keypad TPE-U
Material of pneumatic fitting Brass, nickel-plated

3/3