CLR-12-10-R-P-A FESTO
Document overview
- PDF pages: 2
Technical content
Page 1
Swing clamp cylinder CLR-12-10-R-P-A
Part number: 535431

Data sheet
| Feature | Value |
| Complete stroke | 19 mm |
| Piston diameter | 12 mm |
| Piston rod thread | M3 |
| Swivel angle | 90 deg +/- 4 deg |
| Clamping stroke | 10 mm |
| Type code | CLR |
| Cushioning | Elastic cushioning rings/pads at both ends |
| Mounting position | Any |
| Design | Piston Cylinder barrel Piston rod |
| Position sensing | For proximity sensor |
| Swivel direction | Right |
| Symbol | 00991217 |
| Operating pressure | 2 bar ... 10 bar |
| Mode of operation | Double-acting |
| Operating medium | Compressed air as per ISO 8573-1:2010 [7:4:4] |
| Information on operating and pilot media | Operation with oil lubrication possible (required for further use) |
| Corrosion resistance class (CRC) | 2 - Moderate corrosion stress |
| Ambient temperature | -10 °C ... 80 °C |
| Effective clamping force at 2 bar | 12 N |
| Effective clamping force at 4 bar | 23 N |
| Effective clamping force at 6 bar | 34 N |
| Max. clamping finger screw tightening torque | 1.2 Nm |
| Theoretical clamping force at 6 bar | 51 N |
| Product weight | 135 g |
| Type of mounting | With accessories With through-hole With internal thread Optionally: |
| Pneumatic connection | M5 |
| Flange screws material | Galvanized Steel |
| Cover material | Coated Wrought aluminum alloy |
| Seals material | TPE-U(PU) NBR |
11/20/20 - Subject to change - Festo AG & Co. KG
1/2
Page 2
| Feature | Value |
| Housing material | Smooth anodized Wrought aluminum alloy |
| Piston rod material | High-alloy stainless steel |
| Material of cylinder barrel | Smooth anodized Wrought aluminum alloy |
11/20/20 - Subject to change - Festo AG & Co. KG
2/2