5308060

LL3-TB01 ETC2

Document overview

• Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 16

Technical content

528 SENSICK CATALOGUE

Lichtschranken Baureihe WL 27-2Fibre-optic systems Fibre-optic systems: Bending light the easy way Assignment of systems to fibre- optic cable types: I LL3-D: Standard proximity system (from page 530) – tip adapters as accessories, – plastic fibres and jackets, – in most cases can be cut to any length, – approx. 25 variants, each optimised for different physical loads and installation dimensions. I LL3-T: Standard through-beam system (from page 532) – tip adapters as accessories, – plastic fibres and jackets, – in most cases can be cut to any length, – approx. 25 variants, each optimised for different physical loads and installation dimensions. I LT: Proximity system (from page 552) – glass fibres in chromium- plated metal jackets. I LM: Through-beam system (from page 552) – glass fibres in metal jackets and PVC coating. I LBS: Proximity system (from page 548) – glass fibres in stainless steel jackets, – Ambient operating tempera- ture –58 to +315 °C. I LIS: Through-beam system (from page 548) – glass fibres in stainless steel jackets, – Ambient operating tempera- ture –58 to +315 °C. I LLUV: Proximity system (from page 555) – UV fibre-optic cable. S Sensors which are to be used in fully automatic production processes must be compact and extremely powerful. However, many situations demand more complex solutions. For example if not enough space is available, or a reduction in weight is necessary. Also if the environment of the device is subject to severe vibra- tions, electromagnetic interference or excessive temperatures. Once again, SICK has the answer: fibre-optic systems. SICK offers an extensive range of both pre- assembled fibre-optic cables and cables which can be adapted and cut to length to meet your own specific needs. Cables are avail- able with plastic or metal jacket, plug or screw connections, and a wide selection of different end sleeves. The different types of fibre-optic cables are distinguished by their jacket and the number, as well as arrangement, cross section and material of the optical fibres. Glass fibre-optic cables can be used in temperatures of up to 315 °C. Fibre-optic cables with plastic fibres can usually be shortened to any length and their bending radii are smaller. Fibre-optic cables Proximity system Fibre-optic cables Through-beam system

WLL 160(T) WLL 160 with LL3 fibre-optic cable, plastic I manual sensitivity adjustment, I pre-failure signalling output and test input, I timer 0 to 100 ms, I light-/dark-switching. WLL 160T with LL3 fibre-optic cable, plastic I teach-in sensitivity adjustment, via button on device or externally via control signal, I switching frequency 830/s or 1,600/s, switch-selectable, I timer. WLL 170(T) WLL 170 with LL3 fibre-optic cable, plastic I manual sensitivity adjustment, I red light LED sender, I large scanning ranges, I timer and L.ON-/D.ON selector. WLL 170 high-speed with LL3 fibre-optic cable, plastic I high-speed 10,000/s, I red light LED sender, I timer and L.ON-/D.ON selector. WLL 170 analogue with LL3 fibre-optic cable, plastic I analogue output voltage 1 to 5 V, I red light LED sender, I variable gain. WLL 170T with LL3 fibre-optic cable, plastic I teach-in sensitivity adjustment via button on device, I large scanning ranges, I red light LED sender, I optional: anti-interference. WLL 170T mark sensor with LL3 fibre-optic cable, plastic I teach-in sensitivity adjustment via button on device, I green light LED sender, I optional: anti-interference. WLL 12 with LL3, LT, LM fibre-optic cable I red, infrared or green light LED sender, I complementary switching outputs, selectable via control cable, I switching frequency: 1,300/s. WLL 24 Exi with LL3 fibre-optic cable (l 2.2 mm) I explosion protection E Ex ia IIC T6, I switching outputs to NAMUR EN 50 277 , I terminal chamber or M 12 plug. WLL 260 WLL 260DC with LBS, LIS fibre-optic cable I direct voltage supply, I terminal chamber or M 12 plug, I test input. WLL 260 UC with LBS, LIS fibre-optic cable I universal voltage supply,relay switching output, I terminal chamber. KTL 5G-2 with LBS, LIS fibre-optic cable I green light LED sender, I switching frequency 10,000/s. LUT LUT 3-820 with LLUV 8 fibre-optic cable I UV light source, I supplementary optical filter. LUT 1-4 with LLUV 5 fibre-optic cable I UV light source with high-pressure mercury-vapour burner, I supplementary optical filter. CSL with LBS, LIS fibre-optic cable I teach-in, I adjustable colour selectivity. Which fibre-optic cable fits which sensor? Fibre-optic systems

531 SENSICK CATALOGUE 530SENSICK CATALOGUE

LL 3 Plastic Fibre-optic cable

Description

(mm) LL 3 Fibre-optic cable Proximity Systems IHighly flexible ISmall bend radii IMost fibre-optic cables can easily be cut to length using cutter (supplied) IOperating temperature -- 40…+70°C, special designs up to 180°C SD Type LL3-DB01-10 LL3-DR03 LL3-DT02 LL3-DV03 Part no. 5 308 075 5 308 080 5 308 085 LL3-DF025 308 095 5 308 090 1) For white scanned object, 90% remission, minimum object diameter = size of light (aperture LL: approx. 65°) fibre-optic cable not shortened 2)With scanning front lens for LL3, see front lenses for LL3 3)Bend radius of the supple end sleeve 4)Cannot be cut 5)Ambient operating temperature –40...+180°C 6) Ambient operating temperature –40...+100°C 7)Minimum object diameter: scanning range reduction! G not available MDSDMDSDMDSDMDSDMDSDMDSDMD GG 50.015G60.015G GG yesGyesG 400.015400.015300.015 200.020200.015140.015 400.030400.025300.025 GyesG 50.02050.01530.015 GG yesGyesG GG 500.020G600.020G GG 90.015G120.015G GG 50.015G80.015G GG 100.015G130.015G GG 80.015G140.015G GG 80.015G140.015G WLL170T Green light WLL170T Red light 3V 5V WLL170A Analogue WLL170 Red light High-speed WLL170 Red light WLL160T Red light (FAST) WLL160T Red light (NORM/MAX) WLL160 Red light Selection table: sensors, fibre-optic cables, scanning rangesScanning distance SD1)and minimum target diameter MD7)in mm in combination with sensor type GyesG G450.020G 550.020550.015500.015 1000.0201000.015700.015 90.02080.01550.015 400.030400.025300.025 50.02050.01530.015 90.02090.01550.015 200.020200.015140.015 700.020700.015500.015 200.020200.015140.015 90.02090.01560.015 90.02090.01560.015 700.020700.015500.015 250.020250.015180.015 250.02025/122)0.015180.015 700.020700.015500.015 200.015200.015140.015 200.015200.015140.015 700.015700.015500.015 5 308 094 5 308 093 5 308 092 5 308 091 5 308 089 5 308 088 5 308 087 5 308 086 5 308 084 5 308 083 5 308 082 5 308 081 5 308 079 5 308 078 5 308 077 5 308 076 5 308 074 5 308 073 5 308 072 5 308 071 LL3-DF01 LL3-DY01 LL3-DH026) LL3-DH015) LL3-DV02 LL3-DV01 LL3-DR054) LL3-DT044) LL3-DM03 LL3-DB02 LL3-DR06 LL3-DR044) LL3-DR02 LL3-DR01 LL3-DM02 LL3-DT01 LL3-DB01 LL3-DS06 LL3-DT03 LL3-DM01 Bend radius LL3 Fibre-optic cables Features Fibre-optic cable Proximity System G G G G G G G G G G G G G G G G G G WLL24-2Exi Red light G GGG GG GG GG G 2M2 G G Adaptor for WLL12-2 G 2 015 2102.2 mm AD-LL2M2 Part no.LL-l Type 2M2 G GG GG GG GG G G G G G G G 2M2 G 2M2 G G 2M2 G G G WLL12-2 Infra-red light WLL12-2 Red light Adaptor for WLL12-2 AD-LL- 300.02 SDMDSDMD G GG GG G GG 400.02 40.02 60.02 40.02 200.03 500.02 G G G G 2M2 2M2 SDMD 120.02 300.02 G G G G G G 400.02 40.02 G G 200.03 G G 40.02 60.02 500.02 80.02 150.02 Compact sleeve, M4, long scanning range 25 Super compact, sleeve 2.5 mm diameter 15 Super compact, sleeve M3 10 Long scanning range, M6, coaxial fibre-optic cable 25 10 m length, M6, coaxial fibre-optic cable 25 For front lenses, M3 15 Thin, short sleeve, M4, coaxial fibre-optic cable 25 Highly flexible, M6, long scanning range 4 Highly flexible, small sleeve, M3 4 Highly flexible, 3 mm diameter, thin sleeve 4 Highly flexible, 1.5 mm diameter, thin sleeve 4 Highly flexible, M4, compact sleeve 4 Supple sleeve, M6, long scanning ranges 25/103) Supple sleeve, M4 25/103) Thin long tip, M3 15 Thin long tip, M3, coaxial fibre-optic cable 15 diameter 3.0 mm, thin tip, 0.82 mm diameter 4 90°offset, 5.0 mm diameter 25 90°offset, small sleeve, 3.0 mm diameter 15 90°offset, M6 25 Temperature resistant to 180°C, M6, long scanning range30 Temperature resistant to 100°C, M625 Teflon sheath, resistant to chemicals, 6.0 mm diameter 40 Level switch, clear liquid, 6.0 mm diameter 50 Level switch, cloudy liquid, 6.0 mm diameter 50

533 S E N S I C K CATA LO G U E 532SENSICK CA T ALOGUE

LL 3 Plastic fibre-optic cable (mm) LL 3 Fibre-optic cable Scanning range SR1)and minimum target diameter MD6)in mm in combination with sensor type Through-beam systems 680.1 180.1GG230.1GG GGG 2800.3600.33800.31200.3 180.1180.1100.2 700.2700.1500.1 7000.57000.54000.5 2500.52500.31800.3 SRMDSRMD Type LL 3-TR 01 LL 3-TT 01 LL 3-TS 12 LL 3-TM 03 LL 3-TY 02 Part no. 5 308 062 5 308 070 5 308 067 1) Fibre-optic cable not shortened 2) With scanning front lens for LL 3, see front lenses for LL 3 3) Bend radius of the supple end sleeve 4) Ambient operating temperature – 40 . . . + 180 °C 5) Ambient operating temperature – 40 . . . + 100 °C 6) Minimum object diameter: scanning range reduction! G not available Fibre-optic cable Through-beam systems GGG 8000.33000.318000.32000.3 WLL 170 T Green light WLL 170 T Red light 3V 5V WLL 170 A Analogue WLL 170 Red light High-speed WLL 170 Red light SRMD WLL 160 T Red light (FAST) WLL 160 T Red light (NORM/MAX) WLL 160 Red light Bend radius LL3 Fibre-optic cables 700.2700.1500.1 2000.22000.21500.2 10000.810000.57000.5 3500.53500.52400.5 2601.02601.01901.0 2000.22000.21500.2 400.2400.2300.2 400.2400.2300.2 1500.21500.21300.2 2000.22000.21500.2 500.2500.1400.2 500.2500.1400.2 500.2500.1400.2 5000.55000.53600.5 5 308 069 5 308 068 5 308 066 5 308 065 5 308 064 5 308 063 5 308 061 5 308 060 5 308 059 5 308 058 5 308 057 5 308 056 5 308 055 5 308 054 5 308 053 5 308 052 5 308 051 5 308 050 5 308 049 5 308 048 LL 3-TM 02 LL 3-TM 01 LL 3-TY 01 LL 3-TH 025) LL 3-TH 014) LL 3-TS 10 LL 3-TS 08 LL 3-TV 04 LL 3-TV 02 LL 3-TV 01 LL 3-TB 03 LL 3-TR 03-2 LL 3-TR 03 LL 3-TR 02 LL 3-TB 01-10 LL 3-TB 01 LL 3-TS 07 LL 3-TB 02 Selection table: sensors, fibre-optic cables, scanning ranges IHighly flexible ISmall bend radii IMost fibre-optic cables can be easily cut to length using cutter (supplied) IOperating temperature – 40 …+70 °C, special designs up to 180 °C

Features

0.3 85 0.5 55 0.5 140 0.5 140 0.2 110 G G G G G G G G G G 0.5 340 0.2 45 G G G G G G 0.5 150 0.8 460 0.5 110 0.2 60 1.0 60 G G 0.2 25 G G 1200.2 1800.5 1800.5 700.5 1100.3 250.2 SRMDSRMD 450.5 450.5 250.5 250.3 250.240.2 600.2 4000.5 100.2 751.0 700.2 1600.5 6200.8 1600.5 201.0 150.2 300.5 700.8 250.5 300.240.2 Adaptor for WLL12-2 2 015 0261.0 mm 2 015 2102.2 mm AD-LL 2M2 AD-LL 1MO Part no.LL-l Type Standard M 4 25 Standard, 3 mm diameter, long range 35 Standard, M 4, long range 25 Standard, M 4, length 10 m 25 Highly flexible, M 4, long range 4 Highly flexible, M 3 4 Small sleeve, 1.5 mm diameter, highly flexible, length 1 m 4 Small sleeve, 1.5 mm diameter, highly flexible, length 2 m 4 Flexible end sleeve, M 4 25/103) Compact, M 3, end piece 1.0 mm diameter 15 90° offset, standard, 3 mm diameter 25 90° offset, compact, 2.5 mm diameter 15 90° offset, compact, M 3 15 90° offset, standard, 3 mm diameter 25 90° offset, long range 25 Fibre-optic cable cell 25 Temperature-resistant, M 4 25 Temperature-resistant up to 180 °C, M 4 30 Teflon sheath, 6.0 mm diameter, chemically resistant 40 Teflon sheath, 6.0 mm diameter, chemically resistant 40 90° offset Small end sleeve, M 3, long range 25 Small end sleeve M 3 15 Small end sleeve, 1.5 mm diameter 15

LL 3 Plastic fibre-optic cables SENSICK CATALOGUE Coaxial structure for precise switching Compact end sleeve, excellent scanning ranges Thin end sleeves, long, very thin and flexible end tips: ideal for small, inaccessible objects Extremely flexible fibre-optic cable, bend radius R4, for dynamic mechanical systems Integrated 90° offset, extremely short installation depths Special applications: Accessories: lenses at the front with focused optics Chemicals High temperature Fibre-optic cable length 10 m Level switches Small spot, ideal for extremely small parts, high precision LL3-DA02 f = 12 mm Standard, L = 10 m LL3-DB01-10 Compact head LL3-DT01 Super-compact head LL3-DM02 Compact head, M3 LL3-DS06 Super-compact head ø 2,5 LL3-DT03 ø 2,5 Compact head, large scanning range LL3-DM01 Compact head, flexible end sleeve LL3-DM03 Standard, flexible end sleeve, large scanning rangeLL3-DB02 90° offset LL3-DV03 90° offset LL3-DV01 ø 5 90° offset, compact end sleeve LL3-DV02 ø 1,5 ø 3 Compact, thin end tip LL3-DT02 M3ø 0.82 Compact head, thin end tip LL3-DT04 M3ø 0.82 Level switch: Clear liquids, resistant to chemicals LL3-DF01 Teflon sheath: resistant to chemicals LL3-DY01 ø 6 Resistant up to 180 °C extremely large scanning range LL3-DH01 Resistant up to 100 °C LL3-DH02 Level switch: cloudy liquids, resistant to chemicals LL3-DF02 Basic fibre-optic cable for scanners with front lenses LL3-DT01 Small spot, ideal for marks, colour recognition, small parts LL3-DA01 f = 6 mm Standard, large scanning range LL3-DB01 Flexible, extremely short, extremely thin end sleeveLL3-DR04 ø 1.5 Super-compact, flexible thin end tip LL3-DR05 ø 0.82 ø 3 Flexible, extremely short end sleeve LL3-DR03R4 Flexible, small end sleeve LL3-DR02 Flexible, compact head LL3-DR06 R4LL3-DR01 Flexible, standard, large scanning range ø 3 Flow chart – selection of fibre-optic cables Proximity systems

Thin, short end sleeves Highly flexible fibre-optic cable, extremely small bend radius R4, for dynamic mechanical systems Integrated 90°offset, extremely short installation depths High temperature Chemicals Special applications: Accessories: front lenses, long ranges (max. 3200 mm), 90° offset Fibre-optic cable length 10 m Standard, L = 10 m Flexible end sleeve, ideal for inaccessible objects LL3-TB03 Standard, long range LL3-TB01 Standard, long range LL3-TS07 Standard LL3-TB02 LL3-TB01-10 Compact end sleeve LL3-TM02 Compact head, thin end tip LL3-TT01 Flexible, standard, long range LL3-TR01 90° offset LL3-TS08 90° offset LL3-TV01 90°, very small sleeve LL3-TV04 90°, long range, easy assembly LL3-TS12 Long ranges LL3-TA01 Suitable LL 3 fibre-optic cables LL3-TB02 LL3-TB01 LL3-TB01-10 LL3-TR01 LL3-TH01 90° offset, extremely short installed depth, long range LL3-TA02 Compact, long range LL3-TM01 Flexible, extremely small end sleeve LL3-TR02 Flexible, extremely thin end sleeve LL3-TR03 LL3-TR03-2 Resistant up to 100 °C LL3-TH01 Resistant up to 180 °C, large scanning ranges LL3-TH02 Teflon sheath: resistant to chemicals LL3-TY01 Teflon sheath, 90° offset LL3-TY02 Line of fibre-optic cables Line of fibre-optic cables LL3-TS10 M4 M3 M3 ø 0.5 ø 3 ø 1.5 ø 3 M4 ø 6 ø 6 ø 3 90°, very small sleeve LL3-TV02 ø 2.5ø 1 90°, very small sleeve LL3-TV02 ø 2.5ø 1 ø 2 M4 M4 ø 3 Extremely thin, extremely short end sleeve LL3-TM03 ø 1.5 R4 R4 R4 Through-beam systems Flow chart – selection of fibre-optic cables

LL 3 Plastic fibre-optic cables, proximity systems SENSICK CATALOGUE ø 1.0x2 ø 1.3x2 M4 2000123 Y 40 160 200 Operating position Y (mm) -10 -20 -30 -40 LL3-DM01 WLL 170T: LED red Distance X (mm) 12080 X ø 0.025 mm 4.5 1.5 -1.5 -4.5 Operating position Y (mm) WLL 170T: LED red ø 0.08 mm ø 0.45 mm ø 0.015 mm Distance X (mm) 157.5Y X fine copper wire 22.5 LL3-DM01 ø 0.5x2 ø 2.5 ø 2.5 10 2000 ø 1.0x2 Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids LL3-DM01 Operating level 05 0 1 0 0 Operating margin (%) Scanning distance (mm) 100 WLL 170: LED red WLL 170T: LED red Distance X (mm) Y 10 40 50 Operating position Y (mm) LL3-DT03 WLL 170T: LED red 3020 X ø 0.025 mm Operating position Y (mm) WLL 170T: LED red ø 0.08 mm ø 0.45 mm ø 0.015 mm Distance X (mm) 105Y X fine copper wire LL3-DT03 LL3-DT03 Operating level 01 0 2 0 3 0 Operating margin (%) Scanning distance (mm) 100 WLL 170: LED red WLL 170T: LED red M3x0.5 ø 1.0x2ø 0.5x2 ø 5.5 ø 2.5 12 2000 Distance X (mm) Y 10 40 50 Operating position Y (mm) LL3-DS06 WLL 170T: LED red 3020 X ø 0.025 mm Operating position Y (mm) WLL 170T: LED red ø 0.08 mm ø 0.45 mm ø 0.015 mm Distance X (mm) 105 Y X fine copper wire LL3-DS06 ø 0.26x16 Receiver ø 1 Sender 10 5 15 2000 ø 2.5 M6x0.75 1) 2) ø 2.2x2 LL3-DS06 Operating level 01 0 2 0 3 0 Operating margin (%) Scanning distance (mm) 100 WLL 170: LED red WLL 170T: LED red Y 40 160 200 Operating position Y (mm) -10 -20 -30 -40 LL3-DB01 WLL 170T: LED red Distance X (mm) 12080 X Y X fine copper wire WLL 170T: LED red ø 0.08 mm ø 0.45 mm 22.5 ø 0.025 mmø 0.015 mm 4.5 1.5 -1.5 -4.5 Operating position Y (mm) Distance X (mm) 157.5 ø LL3-DB01 LL3-DB01 Operating level 05 0 1 0 0 Operating margin (%) Scanning distance (mm) 100 WLL 170: LED red WLL 170T: LED red Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids 1) Sender 2) Receiver Y 40 160 200 Operating position Y (mm) -10 -20 -30 -40 LL3-DM01 WLL 170: LED red Distance X (mm) 12080 X ø 0.025 mm 4.5 1.5 -1.5 -4.5 Operating position Y (mm) WLL 170: LED red ø 0.08 mm ø 0.45 mm ø 0.015 mm Distance X (mm) 157.5Y X fine copper wire 22.5 LL3-DM01 Distance X (mm) Y 10 40 50 Operating position Y (mm) LL3-DT03 WLL 170: LED red 3020 X ø 0.025 mm Operating position Y (mm) WLL 170: LED red ø 0.08 mm ø 0.45 mm ø 0.015 mm Distance X (mm) 105Y X fine copper wire LL3-DT03 Distance X (mm) Y 10 40 50 Operating position Y (mm) LL3-DS06 WLL 170: LED red 3020 X ø 0.025 mm Operating position Y (mm) WLL 170: LED red ø 0.08 mm ø 0.45 mm ø 0.015 mm Distance X (mm) 105 Y X fine copper wire LL3-DS06 Y 40 160 200 Operating position Y (mm) -10 -20 -30 -40 LL3-DB01 WLL 170: LED red Distance X (mm) 12080 X Y X fine copper wire WLL 170: LED red ø 0.08 mm ø 0.45 mm 22.5 ø 0.025 mmø 0.015 mm 4.5 1.5 -1.5 -4.5 Operating position Y (mm) Distance X (mm) 157.5 ø LL3-DB01 Order information Dimensional drawings and characteristic curves (WLL 170/T) for LL3 fibre-optic cables – proximity systems Type Part no. LL 3-DM01 5 308 071 Order information Type Part no. LL 3-DT03 5 308 072 Order information Type Part no. LL 3-DS06 5 308 073 Order information Type Part no. LL 3-DB01 5 308 074

ø 0.26x16 Receiver 5 15 10000 ø 1 Sender ø 2.5 2)1) ø 2.2x2M6x0.75 Y Operating position Y (mm) Distance X (mm) 80 100604020 LL3-DB01-10 WLL 170T: LED red X Operating position Y (mm) 51 0 X Y ø 0.015 mm ø 0.45 mm ø 0.008 mm Distance X (mm) ø 0.025 mm LL3-DB01-10 WLL 170T: LED red ø fine copper wire ø 0.25x9 Receiver M3x0.5 ø 1.3x22) 1)513 18 2000 ø 0.5 Sender WLL 170T: LED red LL3-DB01-10 Scanning distance (mm) Operating level 05 0 Operating margin (%) 100 Distance X (mm) Y 10 40 50 Operating position Y (mm) LL3-DT01 WLL 170T: LED red 3020 X ø 0.025 mm Operating position Y (mm) WLL 170T: LED red ø 0.08 mm ø 0.45 mm ø 0.015 mm Distance X (mm) 105Y X fine copper wire LL3-DT01 LL3-DT01 Operating level 02 010 40 60 5030 Operating margin (%) Scanning distance (mm) 100 WLL 170: LED red WLL 170T: LED red Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids 1) Sender 2) Receiver 1) Sender 2) Receiver Y Operating position Y (mm) Distance X (mm) 80 100604020 LL3-DB01-10 WLL 170: LED red X Operating position Y (mm) 51 0 X Y ø 0.015 mm ø 0.45 mm ø 0.008 mm Distance X (mm) ø 0.025 mm LL3-DB01-10 WLL 170: LED red ø fine copper wire Distance X (mm) Y 10 40 50 Operating position Y (mm) LL3-DT01 WLL 170: LED red 3020 X ø 0.025 mm Operating position Y (mm) WLL 170: LED red ø 0.08 mm ø 0.45 mm ø 0.015 mm Distance X (mm) 105Y X fine copper wire LL3-DT01 M4x0.7 ø 0.5 Sender ø 0.25x9 Receiver 2000123 ø 1.3x2ø 8.5 Y 10 40 50 Operating position Y (mm) LL3-DM02 WLL 170T: LED red Distance X (mm) 3020 X ø 0.025 mm Operating position Y (mm) WLL 170T: LED red ø 0.08 mm ø 0.45 mm ø 0.015 mm Distance X (mm) 105Y X fine copper wire LL3-DM02 5,2 12 2000 ø 2.2x2 ø 0.265x16 ø 0.265x16 M6x0.75 LL3-DM02 Operating level 0 1 02 03 04 05 06 0 Operating margin (%) Scanning distance (mm) 100 WLL 170: LED red WLL 170T: LED red Operating position Y (mm) -10 -20 -30 -40 Distance X (mm) Y 40 160 200 LL3-DR01 WLL 170T: LED red 12080 X ø 0.025 mm 4.5 1.5 -1.5 -4.5 Operating position Y (mm) WLL 170T: LED red ø 0.08 mm ø 0.45 mm ø 0.015 mm Distance X (mm) 157.5Y X fine copper wire 22.5 LL3-DR01 LL3-DR01 Operating level 05 0 1 0 0 Operating margin (%) Scanning distance (mm) 100 WLL 170: LED red WLL 170T: LED red Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids Y 10 40 50 Operating position Y (mm) LL3-DM02 WLL 170: LED red Distance X (mm) 3020 X ø 0.025 mm Operating position Y (mm) WLL 170: LED red ø 0.08 mm ø 0.45 mm ø 0.015 mm Distance X (mm) 105Y X fine copper wire LL3-DM02 Operating position Y (mm) -10 -20 -30 -40 Distance X (mm) Y 40 160 200 LL3-DR01 WLL 170: LED red 12080 X ø 0.025 mm 4.5 1.5 -1.5 -4.5 Operating position Y (mm) WLL 170: LED red ø 0.08 mm ø 0.45 mm ø 0.015 mm Distance X (mm) 157.5Y X fine copper wire 22.5 LL3-DR01 Dimensional drawings and characteristic curves (WLL 170/T) for LL3 fibre-optic cables – proximity systems Order information Type Part no. LL 3-DB01-10 5 308 075 Order information Type Part no. LL 3-DM02 5 308 077 Order information Type Part no. LL 3-DR01 5 308 078 Order information Type Part no. LL 3-DT01 5 308 076

LL 3 Plastic fibre-optic cables, proximity systems SENSICK CATALOGUE M3x0.5 ø 1x2 100013 ø 0.25x2 ø 0.25x2Operating position Y (mm) Distance X (mm) Y 41 6 2 0 LL3-DR02 WLL 170T: LED red 128 X 2.5 ø 0.025 mm 1.5 0.5 -0.5 -1.5 Operating position Y (mm) WLL 170T: LED red ø 0.08 mm ø 0.45 mm ø 0.015 mm Distance X (mm) Y X fine copper wire 7.5 LL3-DR02 10 2000 ø 1.0x2ø 3 ø 0.25x2 Sender ø 0.25x2 Receiver LL3-DR02 Operating level 01 02 0 Operating margin (%) Scanning distance (mm) 100 WLL 170: LED red WLL 170T: LED red Distance X (mm) Y 10 40 50 Operating position Y (mm) LL3-DR03 WLL 170T: LED red 3020 X WLL 170T: LED red ø 0.025 mm 1.5 0.5 -0.5 -1.5 Operating position Y (mm) ø 0.08 mm ø 0.45 mm ø 0.015 mm Distance X (mm) 52.5Y X fine copper wire 7.5 LL3-DR03 Operating margin (%) LL3-DR03 Operating level 10 20 30 Scanning distance (mm) 100 WLL 170: LED red WLL 170T: LED red ø 0.25x2 ø 0.25x2 ø 1.5 ø 1.5 ø 1.2 ø 1x2 ø 2.2x2ø 3 900 1515 25 100 Y 41 6 2 0 Operating position Y (mm) LL3-DR04 WLL 170T: LED red 128 X Distance X (mm) ø 0.025 mm 1.5 0.5 -0.5 -1.5 Operating position Y (mm) WLL 170T: LED red ø 0.08 mm ø 0.45 mm ø 0.015 mm Distance X (mm) 52.5Y X fine copper wire 7.5 LL3-DR04 M2.6x0.45 ø 0.25x4 ø 0.25x4 M4x0.7 33 12 2000 ø 1x2 LL3-DR04 Operating level 01 02 0 Operating margin (%) Scanning distance (mm) 100 WLL 170: LED red WLL 170T: LED red Distance X (mm) Y 10 40 50 Operating position Y (mm) LL3-DR06 WLL 170T: LED red 3020 X ø 0.025 mm 1.5 0.5 -0.5 --1.5 Operating position Y (mm) WLL 170T: LED red ø 0.08 mm ø 0.45 mm ø 0.015 mm Distance X (mm) 52.5Y X fine copper wire 7.5 LL3-DR06 LL3-DR06 Operating level 01 0 2 0 3 0 Operating margin (%) Scanning distance (mm) 100 WLL 170: LED red WLL 170T: LED red Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids Operating position Y (mm) Distance X (mm) Y 41 6 2 0 LL3-DR02 WLL 170: LED red 128 X 2.5 ø 0.025 mm 1.5 0.5 -0.5 -1.5 Operating position Y (mm) WLL 170: LED red ø 0.08 mm ø 0.45 mm ø 0.015 mm Distance X (mm) Y X fine copper wire 7.5 LL3-DR02 Distance X (mm) Y 10 40 50 Operating position Y (mm) LL3-DR03 WLL 170: LED red 3020 X WLL 170: LED red ø 0.025 mm 1.5 0.5 -0.5 -1.5 Operating position Y (mm) ø 0.08 mm ø 0.45 mm ø 0.015 mm Distance X (mm) 52.5Y X fine copper wire 7.5 LL3-DR03 Y 41 6 2 0 Operating position Y (mm) LL3-DR04 WLL 170: LED red 128 X Distance X (mm) ø 0.025 mm 1.5 0.5 -0.5 -1.5 Operating position Y (mm) WLL 170: LED red ø 0.08 mm ø 0.45 mm ø 0.015 mm Distance X (mm) 52.5Y X fine copper wire 7.5 LL3-DR04 Distance X (mm) Y 10 40 50 Operating position Y (mm) LL3-DR06 WLL 170: LED red 3020 X ø 0.025 mm 1.5 0.5 -0.5 -1.5 Operating position Y (mm) WLL 170: LED red ø 0.08 mm ø 0.45 mm ø 0.015 mm Distance X (mm) 52.5Y X fine copper wire 7.5 LL3-DR06 Dimensional drawings and characteristic curves (WLL 170/T) for LL3 fibre-optic cables – proximity systems Order information Type Part no. LL 3-DR02 5 308 079 Order information Type Part no. LL 3-DR03 5 308 080 Order information Type Part no. LL 3-DR04 5 308 081 Order information Type Part no. LL 3-DR06 5 308 082

ø 0.26x16 Receiver ø 1 Sender 10 5 1590 2000 ø 2,5 M4x0.7 M6x0.75 ø 2.2x2 LL3-DB02 Operating position Y (mm) -10 -20 -30 -40 Y 40 160 200 WLL 170T: LED red Distance X (mm) 12080 X LL3-DB02 4.5 1.5 -1.5 -4.5 Operating position Y (mm) Y X fine copper wire WLL 170T: LED red ø 0.08 mm ø 0.45 mm 22.5 ø 0.025 mmø 0.015 mm Distance X (mm) 157.5 ø M4x0.7 ø 0.5x1 ø 0.5x1 ø 1.5 ø 2.5 90 5 12 2000 ø 1x2 Operating level LL3-DB02 50 100 Operating margin (%) Scanning distance (mm) 100 WLL 170: LED red WLL 170T: LED red Y 10 40 50 Operating position Y (mm) LL3-DM03 WLL 170T: LED red Distance X (mm) 3020 X ø 0.025 mm Operating position Y (mm) ø 0.08 mm ø 0.45 mm ø 0.015 mm WLL 170T: LED red Distance X (mm) Y X fine copper wire LL3-DM03 Operating margin (%) LL3-DM03 Operating level 10 20 30 Scanning distance (mm) 100 WLL 170: LED red WLL 170T: LED red 1) Flexible end sleeve, do not bend in this region (10 mm), bend radius R10 2) Sender (marked in blue) 3) Receiver 1) Flexible end sleeve, do not bend in this region (10 mm), bend radius R10 Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids LL3-DB02 Operating position Y (mm) -10 -20 -30 -40 Y 40 160 200 WLL 170: LED red Distance X (mm) 12080 X LL3-DB02 4.5 1.5 -1.5 -4.5 Operating position Y (mm) Y X fine copper wire WLL 170: LED red ø 0.08 mm ø 0.45 mm 22.5 ø 0.025 mmø 0.015 mm Distance X (mm) ø Y 10 40 50 Operating position Y (mm) LL3-DM03 WLL 170: LED red Distance X (mm) 3020 X ø 0.025 mm Operating position Y (mm) ø 0.08 mm ø 0.45 mm ø 0.015 mm WLL 170: LED red Distance X (mm) Y X fine copper wire LL3-DM03 ø 0.25x1 ø 0.25x1 ø 3 ø 1.0x2ø 0.82 M3x0.5 1015 5 20002.4 Operating position Y (mm) Distance X (mm) Y 41 6 2 0 LL3-DT02 WLL 170T: LED red 128 X ø 0.025 mm 1.5 0.5 -0.5 -1.5 Operating position Y (mm) WLL 170T: LED red ø 0.08 mm ø 0.45 mm ø 0.015 mm Distance X (mm) 31.5Y X fine copper wire 4.5 LL3-DT02 ø 0.125x9 ø 0.25 ø 3 1515 500 ø 1.0x2 ø 2.2x2M3x0.5 ø 0,82 Material: Core: PMMA, Sheath: PE Sleeve: CuZn, nickel-plated brass LL3-DT02 Operating level 051 0 Operating margin (%) Scanning distance (mm) 100 WLL 170: LED red WLL 170T: LED red Operating position Y (mm) Distance X (mm) Y 41 6 2 0 LL3-DT04 WLL 170T: LED red 128 X ø 0.025 mm 1.5 0.5 -0.5 -1.5 Operating position Y (mm) WLL 170T: LED red ø 0.08 mm ø 0.45 mm ø 0.015 mm Distance X (mm) 52.5Y X fine copper wire 7.5 LL3-DT04 LL3-DT04 Operating level 01 02 0 Operating margin (%) Scanning distance (mm) 100 WLL 170: LED red WLL 170T: LED red 1) End sleeve cannot be bent 1) End sleeve cannot be bent Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids Operating position Y (mm) Distance X (mm) Y 41 6 2 0 LL3-DT02 WLL 170: LED red 128 X ø 0.025 mm 1.5 0.5 -0.5 -1.5 Operating position Y (mm) WLL 170: LED red ø 0.08 mm ø 0.45 mm ø 0.015 mm Distance X (mm) 31.5Y X fine copper wire 4.5 LL3-DT02 Operating position Y (mm) Distance X (mm) Y 41 6 2 0 LL3-DT04 WLL 170: LED red 128 X ø 0.025 mm 1.5 0.5 -0.5 -1.5 Operating position Y (mm) WLL 170: LED red ø 0.08 mm ø 0.45 mm ø 0.015 mm Distance X (mm) 52.5Y X fine copper wire 7.5 LL3-DT04 Dimensional drawings and characteristic curves (WLL 170/T) for LL3 fibre-optic cables – proximity systems Order information Type Part no. LL 3-DB02 5 308 083 Order information Type Part no. LL 3-DM03 5 308 084 Order information Type Part no. LL 3-DT02 5 308 085 Order information Type Part no. LL 3-DT04 5 308 086

LL 3 Plastic fibre-optic cables, proximity systems SENSICK CATALOGUE ø 0.82 ø 3 ø 3 500 ø 1.2x2 ø 2.2x2 ø 0.25 ø 0.25 51 5 1 5 7 5 2 5 Y 41 6 2 0 Operating position Y (mm) LL3-DR05 WLL 170T: LED red 128 X Distance X (mm) ø 0.025 mm 1.5 0.5 -0.5 -1.5 Operating position Y (mm) WLL 170T: LED red ø 0.08 mm ø 0.45 mm ø 0.015 mm Distance X (mm) 31.5Y X fine copper wire 4.5 LL3-DR05 ø 5ø 2.7 200015204.88 1.52 ø 2.2x2 Distance X (mm) Y 10 40 50 Operating position Y (mm) LL3-DV01 WLL 170T: LED red 3020 X Y X ø 0.025 mm Operating position Y (mm) WLL 170T: LED red ø 0.08 mm ø 0.45 mm Distance X (mm) 105 Y X fine copper wire LL3-DV01 LL3-DR05 Operating level 05 1 0 Operating margin (%) Scanning distance (mm) 100 WLL 170: LED red WLL 170T: LED red LL3-DV01 Operating level 05 0 Operating margin (%) Scanning distance (mm) 100 WLL 170: LED red WLL 170T: LED red Material: Core: PMMA, Sheath: PE Sleeve: CuZn, nickel-plated brass Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids Y 41 6 2 0 Operating position Y (mm) LL3-DR05 WLL 170: LED red 128 X Distance X (mm) ø 0.025 mm 1.5 0.5 -0.5 -1.5 Operating position Y (mm) WLL 170: LED red ø 0.08 mm ø 0.45 mm ø 0.015 mm Distance X (mm) 31.5Y X fine copper wire 4.5 LL3-DR05 Distance X (mm) Y 10 40 50 Operating position Y (mm) LL3-DV01 WLL 170: LED red 3020 X Y X ø 0.025 mm Operating position Y (mm) WLL 170: LED red ø 0.08 mm ø 0.45 mm Distance X (mm) 105 Y X fine copper wire LL3-DV01 ø 0.5x2 ø 1.5 ø 3 ø 1 1510 1.52 2000 Distance X (mm) Y 41 6 2 0 Operating position Y (mm) LL3-DV02 WLL 170T: LED red 128 X Y X ø 0.025 mm 1.5 0.5 -0.5 -1.5 Operating position Y (mm) WLL 170T: LED red ø 0.08 mm ø 0.45 mm ø 0.015 mm Distance X (mm) 52.5Y X fine copper wire 7.5 LL3-DV02 2.5 ø 2.7 5 20 2000 M6x0.75 ø 2.2x2 ø 1 LL3-DV02 Operating level 01 02 0 Operating margin (%) Scanning distance (mm) 100 WLL 170: LED red WLL 170T: LED red Distance X (mm) Y 20 80 100 Operating position Y (mm) LL3-DV03 WLL 170T: LED red 6040 X Y X ø 0.025 mm Operating position Y (mm) WLL 170T: LED red ø 0.08 mm ø 0.45 mm Distance X (mm) 105 Y X fine copper wire LL3-DV03 LL3-DV03 Operating level 05 0 Operating margin (%) Scanning distance (mm) 100 WLL 170: LED red WLL 170T: LED red Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids Distance X (mm) Y 41 6 2 0 Operating position Y (mm) LL3-DV02 WLL 170: LED red 128 X Y X ø 0.025 mm 1.5 0.5 -0.5 -1.5 Operating position Y (mm) WLL 170: LED red ø 0.08 mm ø 0.45 mm ø 0.015 mm Distance X (mm) 52.5Y X fine copper wire 7.5 LL3-DV02 Distance X (mm) Y 20 80 100 Operating position Y (mm) LL3-DV03 WLL 170: LED red 6040 X Y X ø 0.025 mm Operating position Y (mm) WLL 170: LED red ø 0.08 mm ø 0.45 mm Distance X (mm) 105 Y X fine copper wire LL3-DV03 Dimensional drawings and characteristic curves (WLL 170/T) for LL3 fibre-optic cables – proximity systems Order information Type Part no. LL 3-DR05 5 308 087 Order information Type Part no. LL 3-DV01 5 308 088 Order information Type Part no. LL 3-DV02 5 308 089 Order information Type Part no. LL 3-DV03 5 308 090

ø 1.5x2 ø 1.5 3 15 19 2000 ø 4.9 M6x0.75 ø 2.2x2 Y 40 160 200 Operating position Y (mm) -10 -20 -30 -40 LL3-DH01 WLL 170T: LED red Distance X (mm) 12080 X ø 0.025 mm 4.5 1.5 -1.5 -4.5 Operating position Y (mm) WLL 170T: LED red ø 0.08 mm ø 0.45 mm ø 0.015 mm Distance X (mm) 157.5Y X fine copper wire 22.5 LL3-DH01 ø 1x2 ø 2.5 M6x0.75 ø 2.2 5 15 2000 LL3-DH01 Operating level 05 0 1 0 0 1 5 0 Operating margin (%) Scanning distance (mm) 100 WLL 170: LED red WLL 170T: LED red Y 40 160 200 Operating position Y (mm) -10 -20 -30 -40 LL3-DH02 WLL 170T: LED red Distance X (mm) 12080 X Y X fine copper wire WLL 170T: LED red ø 0.08 mm ø 0.45 mm 22.5 ø 0.025 mmø 0.015 mm 4.5 1.5 -1.5 -4.5 Operating position Y (mm) Distance X (mm) 157.5 LL3-DH02 LL3-DH02 Operating level 05 0 1 0 0 Operating margin (%) Scanning distance (mm) 100 WLL 170: LED red WLL 170T: LED red Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids 2000 2100 ø 2.2x2ø 2.2ø 6 Distance X (mm) Y 20 80 100 Operating position Y (mm) LL3-DY01 WLL 170T: LED red 6040 X ø 0.025 mm ø 0.015 mm Operating position Y (mm) WLL 170T: LED red ø 0.08 mm ø 0.45 mm Distance X (mm) 105Y X fine copper wire LL3-DY01 ø 1.4 ø 1.8 ø 6 ø 5.5 ø 6 11.6 1.7 i60 8 16 2000 100 Material: Core: PMMA, Sheath: Teflon Sleeve: Teflon LL3-DY01 Operating level 05 0 Operating margin (%) Scanning distance (mm) 100 WLL 170: LED red WLL 170T: LED red Material: Core: PMMA, Sheath: Teflon Sleeve: Teflon 1) For transparent liquids 2) For cloudy liquids Y 40 160 200 Operating position Y (mm) -10 -20 -30 -40 LL3-DH01 WLL 170: LED red X Distance X (mm) 120 ø 0.025 mm 4.5 1.5 -1.5 -4.5 Operating position Y (mm) WLL 170: LED red ø 0.08 mm ø 0.45 mm ø 0.015 mm Distance X (mm) Y X fine copper wire 22.5 LL3-DH01 7.5 15 Y 40 160 200 Operating position Y (mm) -10 -20 -30 -40 LL3-DH02 WLL 170: LED red Distance X (mm) 12080 X Y X fine copper wire WLL 170: LED red ø 0.08 mm ø 0.45 mm 22.5 ø 0.025 mmø 0.015 mm 4.5 1.5 -1.5 -4.5 Operating position Y (mm) Distance X (mm) 157.5 LL3-DH02 Distance X (mm) Y 20 80 100 Operating position Y (mm) LL3-DY01 WLL 170: LED red 6040 X ø 0.025 mm Operating position Y (mm) WLL 170: LED red ø 0.08 mm ø 0.45 mm Distance X (mm) 105Y X fine copper wire LL3-DY01 Dimensional drawings and characteristic curves (WLL 170/T) for LL3 fibre-optic cables – proximity systems Order information Type Part no. LL 3-DH01 5 308 091 Order information Type Part no. LL 3-DH02 5 308 092 Order information Type Part no. LL 3-DY01 5 308 093 Order information Type Part no. LL 3-DF01 5 308 0941) LL 3-DF02 5 308 0952)

LL 3 Plastic fibre-optic cables, through-beam systems SENSICK CATALOGUE ø 1 M4x0.7 M2.6x0.45 1233 2.2 2000 Distance X (mm) Y 120 480 600 Operating position Y (mm) 160 120 -40 -80 -120 -160 LL3-TB02 WLL 170T: LED red 360240 X Distance X (mm) Y 120 480 600 Operating position Y (mm) 160 120 -40 -80 -120 -160 LL3-TB02 WLL 170: LED red 360240 X ø 1.5 N ø 3 15 2000 ø 2x2 Distance X (mm) Y 120 480 600 Operating position Y (mm) 320 240 160 -80 -160 -240 -320 LL3-TS07 WLL 170T: LED red 360240 X Distance X (mm) Y 120 480 600 Operating position Y (mm) 320 240 160 -80 -160 -240 -320 LL3-TS07 WLL 170: LED red 360240 X Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids ø 0.26x16 1237 2000 ø 2.2M4M2.6x0.45 Distance X (mm) Y 120 480 600 Operating position Y (mm) 160 120 -40 -80 -120 -160 LL3-TR01 WLL 170T: LED red 360240 X Distance X (mm) Y 120 480 600 Operating position Y (mm) 160 120 -40 -80 -120 -160 LL3-TR01 WLL 170: LED red 360240 X 2.5 ø 1.0 ø 0.25x4 10 2000 M3x0.5 Distance X (mm) Y 40 160 200 Operating position Y (mm) -16 -24 -32 LL3-TR02 WLL 170T: LED red 12080 X Distance X (mm) Y 40 160 200 Operating position Y (mm) -16 -24 -32 LL3-TR02 WLL 170: LED red 12080 X Material: Core: PMMA, Sheath: PE Sleeve: CuZn, nickel-plated brass Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids 2000123 ø 2.2ø 1.5 M2.6x0.45 M4 Distance X (mm) Y 120 480 600 Operating position Y (mm) 320 240 160 -80 -160 -240 -320 LL3-TB01 WLL 170T: LED red 360240 X Distance X (mm) Y 120 480 600 Operating position Y (mm) 320 240 160 -80 -160 -240 -320 LL3-TB01 WLL 170: LED red 360240 X ø 1.5 ø 2.2 M4M2.6x0.45 100001237 Distance X (mm) Y 120 480 600 Operating position Y (mm) 160 120 -40 -80 -120 -160 LL3-TB01-10 WLL 170T: LED red 360240 X Distance X (mm) Y 120 480 600 Operating position Y (mm) 160 120 -40 -80 -120 -160 LL3-TB01-10 WLL 170: LED red 360240 X Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids LL3-TB02 Operating level 0 400 200 Operating margin (%) WLL 170: LED red WLL 170T: LED red Scanning range (mm) 100 LL3-TS07 Operating level 0 400 600200 Operating margin (%) Scanning range (mm) 100 WLL 170: LED red WLL 170T: LED red LL3-TB01 Operating level 0 400 600200 Operating margin (%) Scanning range (mm) 100 WLL 170: LED red WLL 170T: LED red LL3-TB01-10 Operating level 0 100 200 300 Operating margin (%) WLL 170T: LED red Scanning range (mm) 100 LL3-TR01 Operating level 0 300 200100 Operating margin (%) Scanning range (mm) 100 WLL 170: LED red WLL 170T: LED red LL3-TR02 Operating level 0 10050 Operating margin (%) Scanning range (mm) 100 WLL 170: LED red WLL 170T: LED red Dimensional drawings and characteristic curves (WLL 170/T) for LL 3 fibre-optic cables – through-beam systems Order information Type Part no. LL 3-TB02 5 308 048 Order information Type Part no. LL 3-TS07 5 308 049 Order information Type Part no. LL 3-TB01 5 308 050 Order information Type Part no. LL 3-TB01-10 5 308 051 Order information Type Part no. LL 3-TR01 5 308 052 Order information Type Part no. LL 3-TR02 5 308 053

ø 0.25x4 ø 1.5 10 1000 ø 1.0 Distance X (mm) Y 40 160 200 Operating position Y (mm) -16 -24 -32 LL3-TR03 WLL 170T: LED red 12080 X Distance X (mm) Y 40 160 200 Operating position Y (mm) -16 -24 -32 LL3-TR03 WLL 170: LED red 12080 X ø 0.25x4 ø 1.5 10 2000 ø 1.0 Distance X (mm) Y 40 160 200 Operating position Y (mm) -16 -24 -32 LL3-TR03-2 WLL 170T: LED red 12080 X Distance X (mm) Y 40 160 200 Operating position Y (mm) -16 -24 -32 LL3-TR03-2 WLL 170: LED red 12080 X Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids ø 3ø 2 ø 2.2 1520 2000 1.5 1 ø 1.0 Distance X (mm) Y Y 120 480 600 Operating position Y (mm) 160 120 -40 -80 -120 -160 LL3-TV01 WLL 170T: LED red 360240 X X Distance X (mm) Y Y 120 480 600 Operating position Y (mm) 160 120 -40 -80 -120 -160 LL3-TV01 WLL 170: LED red 360240 X X 2.2 1.5 1 20001510 ø 2.5 ø 1 ø 0.5 ø 1 Distance X (mm) Y Y 40 160 200 Operating position Y (mm) -16 -24 -32 LL3-TV02 WLL 170T: LED red 12080 X X Distance X (mm) Y Y 40 160 200 Operating position Y (mm) -16 -24 -32 LL3-TV02 WLL 170: LED red 12080 X X Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids ø 1 ø 1.5 ø 2.5 M4 ø 2.2 15 20005907 1)3 Distance X (mm) Y 120 480 600 Operating position Y (mm) 160 120 -40 -80 -120 -160 LL3-TB03 WLL 170T: LED red 360240 X Distance X (mm) Y 120 480 600 Operating position Y (mm) 160 120 -40 -80 -120 -160 LL3-TB03 WLL 170: LED red 360240 X ø 0,25 ø 0,5 ø 3 ø 1 5 15 2000 Distance X (mm) Y 10 40 50 Operating position Y (mm) LL3-TT01 WLL 170T: LED red 3020 X Distance X (mm) Y 10 40 50 Operating position Y (mm) LL3-TT01 WLL 170: LED red 3020 X Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids 1) Flexible end sleeve, do not bend in this area (10 mm), radius of curvature R10 LL3-TR03 Operating level 0 10050 Operating margin (%) Scanning range (mm) 100 WLL 170: LED red WLL 170T: LED red LL3-TR03-2 Operating level 0 10050 Operating margin (%) WLL 170T: LED red Scanning range (mm) 100 LL3-TB03 Operating level 0 400 200 Operating margin (%) Scanning range (mm) 100 WLL 170: LED red WLL 170T: LED red LL3-TT01 Operating level 0 302010 Operating margin (%) Scanning range (mm) 100 WLL 170: LED red WLL 170T: LED red LL3-TV01 Operating level 0 300200100 Operating margin (%) Scanning range (mm) 100 WLL 170: LED red WLL 170T: LED red LL3-TV02 Operating level 0 10050 Operating margin (%) Scanning range (mm) 100 WLL 170: LED red WLL 170T: LED red Dimensional drawings and characteristic curves (WLL 170/T) for LL 3 fibre-optic cables – through-beam systems Order information Type Part no. LL 3-TR03 5 308 054 Order information Type Part no. LL 3-TR03-2 5 308 055 Order information Type Part no. LL 3-TB03 5 308 056 Order information Type Part no. LL 3-TV01 5 308 058 Order information Type Part no. LL 3-TV02 5 308 059 Order information Type Part no. LL 3-TT01 5 308 057

LL 3 Plastic fibre-optic cables, through-beam systems SENSICK CATALOGUE LL3-TS12 Operating level 0 20001000 Operating margin (%) Scanning range (mm) 100 WLL 170: LED red WLL 170T: LED red 1.75 1.5 ø 1 ø 1 M3 2.5 1510 2000 ø 0.5 Distance X (mm) Y Y 40 160 200 Operating position Y (mm) -16 -24 -32 LL3-TV04 WLL 170T: LED red 12080 X X Distance X (mm) Y Y 40 160 200 Operating position Y (mm) -16 -24 -32 LL3-TV04 WLL 170: LED red 12080 X X 1.5 1.8 1.4 ø 2.2 ø 3 30 2000 ø 1.0 Distance X (mm) Y Y 120 480 600 Operating position Y (mm) 160 120 -40 -80 -120 -160 LL3-TS08 WLL 170T: LED red 360240 X X Distance X (mm) Y Y 120 480 600 Operating position Y (mm) 160 120 -40 -80 -120 -160 LL3-TS08 WLL 170: LED red 240 X X Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids ø 1.0 M2.6x0.45 M4 ø 2.2 3 12 2000 Distance X (mm) Y 120 480 600 Operating position Y (mm) 160 120 -40 -80 -120 -160 LL3-TH01 WLL 170T: LED red 360240 X Distance X (mm) Y 120 480 600 Operating position Y (mm) 160 120 -40 -80 -120 -160 LL3-TH01 WLL 170: LED red 360240 X 2000 ø 2.2 M3 M4 ø 1.5 Distance X (mm) Y 120 480 600 Operating position Y (mm) 320 240 160 -80 -160 -240 -320 LL3-TH02 WLL 170T: LED red 360240 X Distance X (mm) Y 120 480 600 Operating position Y (mm) 320 240 160 -80 -160 -240 -320 LL3-TH02 WLL 170: LED red 360240 X Material: Core: PMMA, Sheath: PE Sleeve: CuZn, nickel-plated brass Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids 1.80.4 ø 2.2 200030 3.23.6 3.211 ø 4 17.6 ø 0.75 31.3 Distance X (mm) Y Y 400 1600 2000 Operating position Y (mm) -10 -20 -30 -40 LL3-TS12 WLL 170T: LED red 1200800 X X Distance X (mm) Y Y 400 1600 2000 Operating position Y (mm) -10 -20 -30 -40 LL3-TS12 WLL 170: LED red 1200800 X X 5.25 16x0.26 ø 2.2 2000 Distance X (mm) Y Y 120 480 600 Operating position Y (mm) 160 120 -40 -80 -120 -160 LL3-TS10 WLL 170T: LED red 360240 X X Distance X (mm) Y Y 120 480 600 Operating position Y (mm) 160 120 -40 -80 -120 -160 LL3-TS10 WLL 170: LED red 360240 X X Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids Material: Core: PMMA, Sheath: PE Sleeve: CuZn, nickel-plated brass LL3-TV04 Operating level 0 10050 Operating margin (%) Scanning range (mm) 100 WLL 170: LED red WLL 170T: LED red LL3-TS08 Operating level 0 200 300100 Operating margin (%) Scanning range (mm) 100 WLL 170: LED red WLL 170T: LED red LL3-TS10 Operating level 0 400200 Operating margin (%) Scanning range (mm) 100 WLL 170: LED red WLL 170T: LED red LL3-TH01 Operating level 0 300 200100 Operating margin (%) Scanning range (mm) 100 WLL 170: LED red WLL 170T: LED red LL3-TH02 Operating level 0 600 400200 Operating margin (%) Scanning range (mm) 100 WLL 170: LED red WLL 170T: LED red Dimensional drawings and characteristic curves (WLL 170/T) for LL 3 fibre-optic cables – through-beam systems Order information Type Part no. LL 3-TV04 5 308 060 Order information Type Part no. LL 3-TS08 5 308 061 Order information Type Part no. LL 3-TS12 5 308 062 Order information Type Part no. LL 3-TS10 5 308 063 Order information Type Part no. LL 3-TH01 5 308 064 Order information Type Part no. LL 3-TH02 5 308 065

ø 1.5 100 ø 6 ø 5 2000 ø 2.2 Distance X (mm) Y 400 1600 2000 Operating position Y (mm) 160 120 -40 -80 -120 -160 LL3-TY01 WLL 170T: LED red 1200800 X Distance X (mm) Y 400 1600 2000 Operating position Y (mm) 160 120 -40 -80 -120 -160 LL3-TY01 WLL 170: LED red 1200800 X ø 5 ø 6 ø 5 ø 2.2 ø 1.5 1002000 Distance X (mm) Y Y 120 480 600 Operating position Y (mm) 160 120 -40 -80 -120 -160 LL3-TY02 WLL 170T: LED red 360240 X X Distance X (mm) Y Y 120 480 600 Operating position Y (mm) 160 120 -40 -80 -120 -160 LL3-TY02 WLL 170: LED red 360240 X X Material: Core: PMMA; Sheath: Teflon; Sleeve: Teflon Material: Core: PMMA; Sheath: Teflon; Sleeve: Teflon ø 0.5 ø 1.5 10 2000 ø 1.0 Distance X (mm) Y 40 160 200 Operating position Y (mm) -16 -24 -32 LL3-TM03 WLL 170T: LED red 12080 X Distance X (mm) Y 40 160 200 Operating position Y (mm) -16 -24 -32 LL3-TM03 WLL 170: LED red 12080 X Material: Core: PMMA, Sheath: PE Sleeve: 1.4305 (German material no.) Stainless steel, rust-and acid-resistant ø 1,0 2,5 10 2000 ø 1,3 Distance X (mm) Y 120 480 600 Operating position Y (mm) 160 120 -40 -80 -120 -160 LL3-TM01 WLL 170T: LED red 360240 X Distance X (mm) Y 120 480 600 Operating position Y (mm) 160 120 -40 -80 -120 -160 LL3-TM01 WLL 170: LED red 360240 X 2,4 M3x0,6 ø 2 ø 0,5 5 10 2000 ø 1,0 Distance X (mm) Y 40 160 200 Operating position Y (mm) -16 -24 -32 LL3-TM02 WLL 170T: LED red 12080 X Distance X (mm) Y 40 160 200 Operating position Y (mm) -16 -24 -32 LL3-TM02 WLL 170: LED red 12080 X Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids Material: Core: PMMA, Sheath: PE; Sleeve: 1.4305 (German materials no.) Stainless steel, resistant to rusting and acids LL3-TY01 Operating level 0 20001000 Operating margin (%) Scanning range (mm) 100 WLL 170: LED red WLL 170T: LED red LL3-TY02 Operating level 0 200 400 600 Operating margin (%) Scanning range (mm) 100 WLL 170: LED red WLL 170T: LED red LL3-TM01 Operating level 0 400200 Operating margin (%) Scanning range (mm) 100 WLL 170: LED red WLL 170T: LED red LL3-TM02 Operating level 0 10050 Operating margin (%) Scanning range (mm) 100 WLL 170: LED red WLL 170T: LED red LL3-TM03 Operating level 0 10050 Operating margin (%) Scanning range (mm) 100 WLL 170: LED red WLL 170T: LED red Dimensional drawings and characteristic curves (WLL 170/T) for LL 3 fibre-optic cables – through-beam systems Order information Type Part no. LL 3-TY01 5 308 066 Order information Type Part no. LL 3-TY02 5 308 067 Order information Type Part no. LL 3-TM01 5 308 068 Order information Type Part no. LL 3-TM02 5 308 069 Order information Type Part no. LL 3-TM03 5 308 070