525113 FESTO

Document overview

  • PDF pages: 2

Technical content

Page 1

Air solenoid valve MHE2-MS1H-5/2-M7

Part number: 525113

PDF page 1 diagram

Data sheet

Feature Value
Valve function 5/2, monostable
Actuation type Electrical
Width 10 mm
Standard nominal flow rate 90 l/min
Pneumatic working port M7
Operating voltage 24V DC
Operating pressure -0.09 MPa ... 0.8 MPa
Operating pressure -0.9 bar ... 8 bar
Structural design Pressure-relieved poppet valve
Reset method Mechanical spring
Degree of protection IP65
Certification RCM compliance mark c UL us - Recognized (OL)
KC characters KC EMC
CE marking (see declaration of conformity) As per EU EMC directive
Nominal width 2 mm
Width dimension 14 mm
Note on grid dimension Minimum distance between the valves is 4 mm
Type code MH2
Exhaust air function With flow control option
Sealing principle Soft
Mounting position Any
Manual override Non-detenting
Type of control Direct
Flow direction Non-reversible
Symbol 00991129
Lap Underlap
Reverse polarity protection Bipolar
Additional functions Spark suppression Holding current reduction Protective circuit
Max. switching frequency 300 Hz
Switching time off 1.7 ms
On switching time 1.9 ms
Tolerance for switching time off +10 %/-30 %
Tolerance for ON switching time +10%/-30%

11/15/21 - Subject to change - Festo AG & Co. KG

1/2

Page 2

Feature Value
Switching time variation at 1 Hz and above 0.2 ms
Duty cycle 100%
Coil characteristics 24 V DC: low-current phase 1.625 W, high-current phase 6.5 W
Permissible voltage fluctuations +/- 10 %
Operating medium Compressed air as per ISO 8573-1:2010 [7:4:4]
Information on operating and pilot media Operation with oil lubrication possible (required for further use)
Vibration resistance Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
Restricted ambient and media temperature Depending on the switching frequency (see diagram)
Shock resistance Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
Corrosion resistance class (CRC) 2 - Moderate corrosion stress
Temperature of medium -5 °C ... 60 °C
Ambient temperature -5 °C ... 60 °C
Max. tightening torque of pneumatic fitting 2 Nm
Product weight 70 g
Electrical connection 2-pin Plug
Type of mounting With through-hole
Pneumatic connection 1 M7
Pneumatic connection 2 M7
Pneumatic connection 3 M7
Pneumatic connection 4 M7
Pneumatic connection 5 M7
Note on materials Free of copper and PTFE RoHS-compliant
Seals material HNBR NBR
Housing material Die-cast zinc Coated
Material of screws Steel Galvanized

11/15/21 - Subject to change - Festo AG & Co. KG

2/2