DATASHEET SEARCH SITE

Document overview

  • PDF pages: 2

Technical content

Page 1

P1602

Pressure Sensor Die

Description

The P1602 piezoresistive pressure sensors are offered in a miniature 0.04 in x 0.04 in (1 mm x 1 mm) die. When ex- cited with 1 mA constant current , the P1602 produces a millivolt output that is proportional to input pressure. The P1602 is available as an absolute pressure sensor, where the applied pressure is referenced to an internal vacuum sealed within the die. With NovaSensor’s Senstable® process, the P1602 will provide very low long-term stability errors and excellent repeatability.

Applications

  • Consumer: Portable tire gauges, altimeters, and barometers
  • Industrial: Pneumatic controls, leak detection, manometers, portable pressure gauges, pressure switches, and controllers
  • Automotive: Tire pressure, diagnostics, engine, and suspension control, MAP sensors
  • Medical: Patient monitoring and clinical instrumentation

Amphenol

Advanced Sensors

Features

  • Solid state, high reliability
  • Low-cost , miniature size
  • Standard pressure ranges: 0 to 15, 0 to 30, 0 to 50,
  • 0 to 100 psia (1, 2.1, 3.4 and 6.9 bar)
  • Nonlinearity < 0.2 %FSO
  • SenStable, silicon fusion bonded sensor die

Page 2

P1602 Specifications

Shipping and Handling

Parameter

Value

Units

Notes

Wafers are shipped in protective plastic containers. The wafers are

Electrical @ 71.6°F (22°C) unless noted

sawn on sticky tape with rings. All sensor wafers are electrically

10 VDC maximum probed, visually inspected. All rejects are marked by an ink dot. Each

Excitation

1.00

mA

wafer will be labeled with the lot number, wafer number, device num-

Input Impedance

5000 ±20% Ω

ber, and the number of available sensor die.

Output Impedance

5000 ±20% Ω

Warranty

Environmental

NovaSensor warrants its products against defects in material and

Operating Temperature

-40 to 257 °F

(-40°C to 125°C)

workmanship for 12 months from the date of shipment. Products not subjected to misuse will be repaired or replaced. NovaSensor

Storage Temperature

-67 to 302 °F

(-55°C to 150°C)

reserves the right to make changes without further notice to any

(undiced)

products herein. NovaSensor makes no warranty, representation or

Maximum Overpressure

6X

Rated pressure

guarantee regarding the suitability of its products for any particular

2X

3 application. NovaSensor does not assume any liability arising out of

Mechanical

the application or use of any product or circuit and specifically disclaims, and all liability, without limitation consequential or incidental

Weight

0.02

Grams

xx lb

damages. The foregoing warranties are exclusive and in lieu of all

Media Compatibility

Clean dry

other warranties, whether written, oral, implied or statutory. No im-

air, non-

plied statutory warranty of merchantabilility or fitness for particular

corrosive

purpose shall apply.

gases

Performance

Ordering Information

Parameters (1)

Part Number 51393

Value (6)

Units

Notes

51394

Zero Offset

±8

mV/V

51395

±10

mV/V

2 51397 51399

Full-scale (FS) Output

65 to 115

mV

2 51406

75 to 125

mV

51407 51408

170 to 280 mV

3 51421

Linearity

±0.2

%FSO

4 51409

±0.25

%FSO

3, 4

Minimum Release Quantity:

Description

15 psia (1 bar); ≈100 kPaA 30 psia (2.06 bar); ≈200 kPaA 50 psia (3.44 bar); ≈350 kPaA 100 psia (6.89 bar); ≈700 kPaA 150 psia (10.34 bar); ≈1035 kPaA 300 psia (20.68 bar); ≈2070 kPaA 500 psia (34.47 bar); ≈3450 kPaA 1000 psia (68.94 bar); ≈6895 kPaA 2500 psia (172.36 bar); ≈17,240 kPaA 4295 psia (296.12 bar); ≈30,000 kPaA

2 wafers per pressure range or approximately 10,000 sensor die.

Pressure Hysteresis

±0.1

%FSO

PDF page 2 diagram

Temperature

±30

µV/V/°C

5

Coefficient of Zero

Temperature

0.3

% /°C

5

Coefficient of Resistance

Temperature Coefficient

-0.2

%/°C

5

of Sensitivity

Thermal Hysteresis of Zero ±0.1

%FSO

6

Long Term Stability of FSO 0.2

%FSO

7

  1. Values measured at 1.0 mA and 71.6°F (22°C) unless noted. 2. 100 Kpa pressure range. 3. 4295 psia (296.12 bar) pressure range. 4. Best fit straight line. 5. Between 32°F and 158°F (0°C and 70°C). Temperature coefficients are typical values. 6. Between 32°F and 158°F (0°C and 70°C). 7. Typical over one year.

Amphenol

P1602 schematic and dimensions

www.amphenol-sensors.com

© 2014 Amphenol Corporation. All Rights Reserved. Specifications are subject to change without notice.

Advanced Sensors

Other company names and product names used in this document are the registered trademarks or

trademarks of their respective owners.

AAS-920-265B-08/2014