MIRA050 OSRAM

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(free datasheet download site)
  • PDF pages: 8

Technical content

Tobelbader Strasse 30, 8141 Premstaetten, Austria Phone +43 3136 500-0 ams-osram.com © All rights reserved Mira050 Datasheet

Short Datasheet • PUBLIC • Document Feedback DS001066 • v3-00 • 2024-Mar-05 2 / 8 Table of contents

Short Datasheet • PUBLIC • Document Feedback DS001066 • v3-00 • 2024-Mar-05 3 / 8 Mira050 0.5 MP NIR-Enhanced high speed global shutter image sensor

1 General description

Mira050 is a compact 0.5 MP Near IR enhanced global shutter image sensor designed for 2D and 3D consumer and industrial machine vision applications. The sensor has a small 2.79 µm pixel size with high sensitivity made possible by a state of the art BSI technology. The sensor has a MIPI CSI-2 interface to allow easy interfacing with a plethora of processors and FPGAs. Due to its small size, configurability and high sensitivity both in visual as well as NIR, the Mira050 is well suited for 2D and 3D applications, which include Active Stereo Vision, Structured Light Vision and AR/VR. High sensitivity in NIR enables increased measurement range and allows overall system power consumption optimization which is key for battery powered consumer and industrial applications.

2 Specifications & special features

Table 1: Key specifications Parameter Value Remark Active pixels 576 (H) x 768 (V) CSP 600 (H) x 800 (V) Bare Die On CSP the addressable area is 600 x 800 but only 576 x768 is useable. Pixel 2.79 µm × 2.79 µm BSI stacked technology with high NIR sensitivity. Low noise and low cross talk Optical format 1/7” Dimensions 2.25 mm x 2.75 mm – Die 2.29 mm x 2.83 mm – CSP Active area 60% of total. Shutter type Voltage domain pipelined global shutter Possibility of exposure of next image during readout of the previous image. Quantum efficiency (QE) 94 / 56 / 36 % 550 / 850 / 940 nm Mono Supported lens chief ray angle (CRA) 0° to 30° Extra wide acceptance angle of the Mira050 pixel means any lens profile with these CRA values can be used. ADC modes 8-bit | 10-bit | 10-bit HS | 12-bit

Specifications & special features Short Datasheet • PUBLIC • Document Feedback DS001066 • v3-00 • 2024-Mar-05 4 / 8 Parameter Value Remark Max frames per second full resolution 120 fps All ADC modes Analog gain 1x → 4x step: 2x 1x → 16x step: 2x 1x → 4x step: 3% 1x → 32x step: 2x 1x → 16x step: 3% 12-bit | 10-bit HS (Default mode) 10-bit (Default mode) 10-bit HS (Fine gain mode) 8-bit (Default mode) 8-bit (Fine gain mode) Digital gain 1x → 16x step: 1/16x 8-bit |10-bit | 10-bit HS | 12-bit Data interface MIPI CSI-2 v1.3 DPHY v1.2 1 Data lane | 1 Clock lane 1.5 Gbps with data scrambling support Table 2: Special features Features Benefits Programmable registers Programming of window coordinates, timing parameters, exposure time, mirror, flipping, cropping High sensitivity and NIR enhanced pixel High sensitivity and compact pixel size achieved via state of the art BSI technology with NIR enhancement resulting in less power hungry illuminators Context switching Two register contexts for on the fly configuration changes On-chip processing

  • Defect pixel detection and correction
  • Image statistics generation
  • Event detection
  • In pixel background light cancellation
  • Digital pixel binning
  • Black sun protection
  • Flexible ROI selection On-chip advanced power management Smart powering of on chip blocks with respect to frame rate and exposure time resulting in extended battery life On-chip temperature sensor Accurate temperature reading on junction temperature Illumination synchronization trigger Accurate timing between illumination and actual exposure

Applications

Short Datasheet • PUBLIC • Document Feedback DS001066 • v3-00 • 2024-Mar-05 5 / 8

3 Applications

  • Facial authentication for mobile devices and points of payments.
  • Active stereo and structured light vision (Robotics and other applications).
  • Eye, head, hand, environment tracking for AR/VR.

4 Block diagram

Figure 1: Functional blocks of Mira050

Ordering information

Short Datasheet • PUBLIC • Document Feedback DS001066 • v3-00 • 2024-Mar-05 6 / 8

5 Ordering information

Product code Ordering code Package Delivery form Color filter Delivery quantity Mira050-1QM3D0 511930021 Q65113A5663 Reconstructed wafer (bare die) R/W None Contact sales Mira050-1QM1WB 511930019 Q65113A5422 CSP CSP None Multiples of 120 Mira050-1QC3D0 511930027 Q65113A7495 Reconstructed wafer (bare die) R/W RGB Contact sales Mira050-1QC1WB 511930025 Q65113A7494 CSP CSP RGB Multiples of 120 Mira050-1QI3D0 511930033 Q65113A7603 Reconstructed wafer (bare die) R/W RGB-IR Contact sales Mira050-1QI1WB 511930031 Q65113A7602 CSP CSP RGB-IR Multiples of 120

Short Datasheet • PUBLIC • Document Feedback DS001066 • v3-00 • 2024-Mar-05 7 / 8

6 Revision information

Document status Product status Definition Product Preview Pre-development Information in this datasheet is based on product ideas in the planning phase of development. All specifications are design goals without any warranty and are subject to change without notice Preliminary Datasheet Pre-production Information in this datasheet is based on products in the design, validation or qualification phase of development. The performance and parameters shown in this document are preliminary without any warranty and are subject to change without notice Datasheet Production Information in this datasheet is based on products in ramp-up to full production or full production which conform to specifications in accordance with the terms of ams-OSRAM AG standard warranty as given in the General Terms of Trade Other definitions Draft / Preliminary: The draft / preliminary status of a document indicates that the content is still under internal review and subject to change without notice. ams-OSRAM AG does not give any warranties as to the accuracy or completeness of information included in a draft / preliminary version of a document and shall have no liability for the consequences of use of such information. Short datasheet: A short datasheet is intended for quick reference only, it is an extract from a full datasheet with the same product number(s) and title. For detailed and full information always see the relevant full datasheet. In case of any inconsistency or conflict with the short datasheet, the full datasheet shall prevail. Changes from previous released version to current revision v3-00 Page Updated “Delivery quantity” in “Ordering information” section 6

  • Page and figure numbers for the previous version may differ from page and figure numbers in the current revision.
  • Correction of typographical errors is not explicitly mentioned.

Short Datasheet • PUBLIC • Document Feedback DS001066 • v3-00 • 2024-Mar-05 8 / 8

7 Legal information

Copyright & disclaimer Copyright ams-OSRAM AG, Tobelbader Strasse 30, 8141 Premstaetten, Austria-Europe. Trademarks Registered. All rights reserved. The material herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. Devices sold by ams-OSRAM AG are covered by the warranty and patent indemnification provisions appearing in its General Terms of Trade. ams-OSRAM AG makes no warranty, express, statutory, implied, or by description regarding the information set forth herein. ams-OSRAM AG reserves the right to change specifications and prices at any time and without notice. Therefore, prior to designing this product into a system, it is necessary to check with ams-OSRAM AG for current information. This product is intended for use in commercial applications. Applications requiring extended temperature range, unusual environmental requirements, or high reliability applications, such as military, medical life-support or life- sustaining equipment are specifically not recommended without additional processing by ams-OSRAM AG for each application. This product is provided by ams-OSRAM AG “AS IS” and any express or implied warranties, including, but not limited to the implied warranties of merchantability and fitness for a particular purpose are disclaimed. ams-OSRAM AG shall not be liable to recipient or any third party for any damages, including but not limited to personal injury, property damage, loss of profits, loss of use, interruption of business or indirect, special, incidental or consequential damages, of any kind, in connection with or arising out of the furnishing, performance or use of the technical data herein. No obligation or liability to recipient or any third party shall arise or flow out of ams-OSRAM AG rendering of technical or other services. Product and functional safety devices/applications or medical devices/applications: ams-OSRAM AG components are not developed, constructed or tested for the application as safety relevant component or for the application in medical devices. ams-OSRAM AG products are not qualified at module and system level for such application. In case buyer – or customer supplied by buyer – considers using ams-OSRAM AG components in product safety devices/applications or medical devices/applications, buyer and/or customer has to inform the local sales partner of ams-OSRAM AG immediately and ams-OSRAM AG and buyer and /or customer will analyze and coordinate the customer-specific request between ams-OSRAM AG and buyer and/or customer. ams OSRAM semiconductor RoHS compliance statement RoHS compliant: The term RoHS compliant means that ams-OSRAM AG semiconductor products fully comply with current RoHS directives. Our semiconductor products do not contain any chemicals for all 6 substance categories plus additional 4 substance categories (per amendment EU 2015/863), including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Important information: The information provided in this statement represents ams-OSRAM AG knowledge and belief as of the date that it is provided. ams-OSRAM AG bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. ams-OSRAM AG has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. ams-OSRAM AG and ams-OSRAM AG suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. Headquarters ams-OSRAM AG Tobelbader Strasse 30

8141 Premstaetten

Austria, Europe Tel: +43 (0) 3136 500 0 Please visit our website at ams-osram.com For information about our products go to Products For technical support use our Technical Support Form For feedback about this document use Document Feedback For sales offices and branches go to Sales Offices / Branches For distributors and sales representatives go to Channel Partners