DATASHEET SEARCH SITE
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Features
Applications
Electrical Characteristics for Series % of Ampere Rating Ampere Rating Opening Time 100% 1A~8A
4 Hours, Minimum
200% 120 Seconds, Maximum
- Rated voltage @ 650VDC
- Available in cartridge and axial lead version
- RoHS compliant and Lead-free
- High Voltage DC power application
- Inverter
- DC-DC Converter
- High voltage Power Supplies
Description
(A) Max. Voltage Rating (V) Interrupting Rating Nominal Cold Resistance (Ohms) Nominal Melting I2t (A2 sec) Agency Approvals 0 01. 1 650VDC 150A@650VDC 0.37 0.6 x x 1 .25 1 .25 0.23 1. 5 x x 01. 6 1. 6 0.165 2.9 x x 002. 2 0.115 2.3 x x 02.5 2.5 0.083 4.1 x x 3.15 3.15 0.056 9.3 x x 004. 4 0.055 8 x x 005. 5 0.042 12.5 x x 06.3 6.3 0.0285 29 x x 008. 8 0.0207 53 x x Electrical Characteristic Specifications by Item Application testing is strongly recommended. Additional Information Datasheet SamplesResources
© 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 07/14/16 Axial Lead & Cartridge Fuses 3AB > 507 Series Fuse Soldering Parameters - Wave Soldering Dwell Time 100 120 140 160 180 200 220 240 260 280 300 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 Time (Seconds) Temperature (°C) - Measured on bottom side of board Cooling TimePreheat Time T emperature Re-rating Curve Average Time Current Curves Wave Parameter Lead-Free Recommendation Preheat: (Depends on Flux Activation Temperature) (Typical Industry Recommendation) Temperature Minimum: 100°C Temperature Maximum: 150°C Preheat Time: 60-180 seconds Solder Pot Temperature: 260°C Maximum Solder Dwell Time: 2 to 5 seconds Recommended Hand-Solder Parameters: Solder Iron Temperature: 350°C +/- 5°C Heating Time: 5 seconds max. Note: These devices are not recommended for IR or Convection Reflow process. Recommended Process Parameters: Note: Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 0.001 0.01 0.1 100 1000 10000 0.11 10 100 1000 Current in Amperes Time in Seconds 1.00A 1.25A 1.60A 2.00A 2.50A 3.15A 4.00A 5.00A 6.30A 8.00A
© 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 07/14/16 Axial Lead & Cartridge Fuses 3AB > 507 Series Fuse Packaging Option Packaging Specification Quantity Quantity & Packaging Code Reel Size
507 Series
Body : Ceramic Cap : Nickel–plated brass Leads : Tin-plated Copper T erminal Strength MIL -STD-202, Method 211, Test Condition A Solderability MIL -STD-202 Method 208 Product Marking Cap1 : Brand logo, current and voltage ratings Cap2 : Series and agency approval marks Operating Temperature: –55ºC to 125ºC. Thermal Shock: MIL -STD-202, Method 107 , Test Condition B: (5 cycles -65ºCto +125ºC) Vibration MIL -STD-202, Method 201 Humidity MIL -STD-202, Method 103, Test Condition A: High relative humidity (95%) and elevated tem- perature (40ºC) for 240 hours Salt Spray MIL -STD-202, Method 101, Test Condition B 0507XXX.MX E Series Quantity Code M = 1000 Amp Code Refer to Amp Code column of Electrical Characteristics Table Option Codes Blank: Cartridge Type Fuse E : Axial Leaded Fuse Lead-Free Packaging Code X = Filler P Part Numbering SystemDimensions Measurements displayed in millimeters (inches) 507 000P Series (cartridge) 507 000P Series (axial leaded) 6.35±0.3 (.25") 32.72±1.12 (1.288") 31.75±1.12 (1.25") 6.985±0.3 (.275") Axial Lead Diameter: 0.81±0.05 (.032") Axial Lead Length: Axial Lead Material: Tin-coated copper