5.0SMDJ5.0A SUNMATE
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 4
Technical content
Features
Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 Terminals: Lead Free Plating (Matte Tin Finish). Solderable per MIL-STD-202, Method 208 Marking: Date Code and Marking Code Weight: 0.21 grams (approximate) www.sunmate.tw Maximum Ratings and Electrical Characteristics T A = 25/c176C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dim Min Max A 5.59 6.22 B 6.60 7.11 C 2.75 3.18 D 0.15 0.31 E 7.75 8.13 G 0.10 0.20 H 0.76 1.52 J 2.00 2.62 All Dimensions in mm A B C D GH E J SMC/DO-214AB 1.0ps from 0 volt to BV min. For surface mount application Built-in strain relief Excellent clamping capability Low profile package Fast response time: Typically less than RTypical I less than 1 A above 10V RATINGS SYMBOL V Peak Power Dissipation at TA=25 C, TP=1ms(NOTE 1) PPK Minimum 5000 Watts Power Dissipation on infinite heatsink at TL=75 C PD 6.5 Watts Peak Forward Surge Current at 8.3ms Single Half Sine-Wave Maximum Instantenous Forward Voltage at 100A for superimposed on rated load (JEDEC method) (NOTE 3) Unidirectional only Operating and Storage Temperature Range TJ, TSTG -55 to +150 C IFSM 300 Amps VF 3.5/5.0 Volts NOTES: 1. Non-repetitive current pulse per Fig. 3 and derated above TA=25 C per Fig. 2. 2. 8.3ms single half sine-wave, duty cycle = 4 pulses per minute maximum. 3. VF<3.5V for devices of VBR<200V and VF<5.0V for devices of VBR>201V. ALUE UNITS
VR (V) Min (V) Max (V) I T (mA) IR ( µ Ipp (A) Vc (V) Maximum Clamping Voltage @ Ipp Breakdown Voltage V BR @ I T Maximum Reverse Leakage @ VR Reverse Standoff Voltage Part Number (Uni) Part Number (Bi) Maximum Peak Pulse Current 2 of 4 www.sunmate.tw
VR (V) Min (V) Max (V) I T (mA) IR ( µ Ipp (A) Vc (V) Maximum Peak Pulse Current Maximum Clamping Voltage @ Ipp Part Number (Uni) Part Number (Bi) Reverse Standoff Voltage Breakdown Voltage V BR @ I T Maximum Reverse Leakage @ VR 3 of 4 www.sunmate.tw
www.sunmate.tw RATING AND CHARACTERISTIC CURVES (5.0SMDJ SERIES) PPPM, PEAK PULSE POWER, KWIPPM, PEAK PULSE CURRENT, FIG.1-PEAK PULSE POWER DERATING CURVE 0.1ms 1.0ms 10ms 100ms 1.0ms 10ms 0.1 1.0 100 td, PULSE WIDTH, sec. Non-Repetitive Pulse Waveform Shown in Fig. 3 TA=25 C FIG.2-PULSE DERATING CURVE PEAK PULSE POWER(PPP) OR CURRENT(IPP) DERATING IN PERCENTAGE TA, AMBIENT TEMPERATURE ( C) 0 25 50 75 100 125 150 175 100 FIG.3-PULSE WAVE FORM 0 1.0 2.0 3.0 4.0 t, TIME, ms 100 150 td e-kt Tf=10 s Peak Value IPPM Half Value-IPPM TA=25 C Pulse Width (td) is defined as the point where the Peak Current Deacys to 50% of Ipp FIG.5-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT NUMBER OF CYCLES AT 60Hz 8.0mm COPPER PAD AREAS FIG.4-TYPICAL JUNCTION CAPACITANCE 1.0 2.0 5.0 10 20 50 100 200 V(BR), BREAKDOWN VOLTAGE, VOLTS 100 200 500 1,000 2,000 5,000 10,000 Measured at Stand-Off Voltage(VMW) Measued at Zero Bias TJ=25 C f=1.0MHz Vsig=50mVp-p CJ, CAPACITANCE, pF 10/1000 sec Waveform as Defined by R.E.A. 1 5 10 20 50 100 100 150 200 250 300 IFSM, PEAK FORWARD SURGE CURRENT, AMPERES TJ=TJmax 8.3ms Single Half Sine-wave JEDEC Method