5.0SMDJ BYTESONIC

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 4

Technical content

Features

l Peak power dissipation 5000W @10 x 1000 us Pulse l Low profile package. l Excellent clamping c apability. l Glass passivated j unction. l Typical I R less than 5uA when V BR above 22V. l Fast response time: typically less than 1.0ps from 0 Volts to BV min l IEC 61000-4-2 ESD 30KV(Air), 30KV(Contact) l ESD protection of data lines in accordance with IEC 61000 -4-2 l EFT protection of data lines in accordance with IEC 61000 -4-4 l Halogen free and RoHS compliant l Lead-free finish Mechanical Characteristics l CASE: SMC (DO-214AB) Molded Plastic over glass passivated junction. l Mounting Position: Any l Polarity: by cathode band denotes uni -directional device, none cathode band denotes bi -directional device. l Terminal: Solder plated Maximum Ratings and Characteristics @ 25°C Ambient Temperature (unless otherwise noted) Parameter Symbol Value Units Peak Pulse Power Dissipation on 10/1000 us Waveform (Note 1, 2, FIG.1) P PPM 5000 W Power Dissipation on Infinite Heat Sink at T L =50°C P D 6.5 W Peak Pulse Current of on 10/1000us Waveform (Note 1, FIG.3) I PPM See Table 1 A Peak Forward Surge Current, 8.3ms Single Half Sine -Wave (Note 2. 3) I FSM 300 A Operating Junction Temperature Range T J -55 to 150 °C Storage Temperature Range T STG -55 to 150 °C Notes: 1. Non-repetitive current pulse, per Fig.3 and derated above T A =25°C per Fig.2. 2. Mounted on 8.0x8.0mm (0.03mm thick) Copper Pads to each terminal. Measured on 8.3ms single half sine-wave, or equivalent square wave, for Unidirectional device only. Version 1.2 2019/07/26 http://www.bytesonic.com.tw VOLTAGE RANGE 12 to 170 Volts

5000 Watts Peak Power

Dimensions in inches and (millimeters) .320(8.13) .305(7.75) .280(7.11) .260(6.60) .012(0.31) .006(0.15) .124(3.15) .108(2.75) .106(2.70) .079(2.00) .050(1.27) .030(0.76) .245(6.22) .220(5.59) .008 (.203)MAX. High temperature soldering : 260°C /10 seconds at terminals l

5.0SMDJ Series Electrical Specification @ Tamb 25°C Type Number Marking Reverse Stand-Off Voltage Breakdown Voltage Min. @I T Breakdown Voltage Max. @ I T Test Current Maximum Clamping Voltage PP Peak Pulse Current Reverse Leakage RMW (Uni) (Bi) (Uni) (Bi) V RMW (V) V BR MIN (V) V BR MAX (V) I T (mA) V C (V) I PP (A) I R (uA) ※ For Bi-directional type having V RWM of 20 Volts and less, the I R limit is double. ※ For parts without A, the VBR is ± 10% and VC is 5% higher than with A parts. Version 1.2 2019/07/26 http://www.bytesonic.com.tw

5.0SMDJ Series I-V Curve Characteristics P PPM Peak Pulse Power Dissipation - Max power dissipation V RWM Reverse Stand-off Voltage - Maximum voltage that can be applied to TVS without operation V BR Breakdown Voltage – Maximum voltage that flows though the TVS at a specified current (I T V C Clamping Voltage – Peak voltage measured across the TVS at a specified I PPM (peak impulse current) I R Reverse Leakage Current – Current measured at V R V F Forward Voltage Drop for Uni -directional Ratings and Characteristic Curves A =25°C unless otherwise noted ) Fig.1 - Peak Pulse Power Rating Fig.2 - Pulse Derating Cure Bi-directional Uni-directional Version 1.2 2019/07/26 http://www.bytesonic.com.tw

5.0SMDJ Series Fig.3 – Pulse Waveform Fig.4 - Typical Junction Capacitance Version 1.2 2019/07/26 http://www.bytesonic.com.tw