DATASHEET SEARCH SITE
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 6
Technical content
Features
n RoHS compliant* and halogen free** n Surface mount SMC package n Standoff voltage: 12 to 170 volts n Peak Pulse Power: 5000 watts n Typical temperature coefficient: DVBR = 0.1 % x VBR @ 25 °C x DT Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) 5.0SMDJ Transient Voltage Suppressor Diode Series * RoHS Directive 2015/863, Mar 31, 2015 and Annex. **Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Parameter Symbol Value Unit Minimum Peak Pulse Power Dissipation (Tp = 1 ms) (Note 1,2) PPK 5000 Watts Peak Forward Surge Current 8.3 ms Single Half Sine Wave Superimposed on Rated Load (JEDEC Method) (Note 3,4) IFSM 300 Amps Steady State Power Dissipation @ TL = 50 °C PM(AV) 6.5 Watts Maximum Instantaneous Forward Voltage @ IPP = 100 A (For Unidirectional Units Only) VF 5 Volts Operating Temperature Range TJ -55 to +150 °C Storage Temperature Range TSTG -55 to +150 °C 1. Non-repetitive current pulse, per Pulse Waveform graph and derated above TA = 25 °C per Pulse Derating Curve. 2. Thermal Resistance Junction to Lead. 3. 8.3 ms Single Sine Wave duty cycle = 4 pulses maximum per minute (unidirectional units only). 4. Mounted on 8.0 mm x 8.0 mm copper pad area to each terminal. General Information Portable communications, computing and video equipment manufacturers are challenging the semiconductor industry to develop increasingly higher power density circuit protection components. Bourns offers Transient Voltage Suppressor Diodes for surge and ESD protection applications, in compact chip package DO-214AB (SMC) size format. The Transient Voltage Suppressor series offers a choice of Working Peak Reverse Voltage from 12 V up to 170 V and Breakdown Voltage up to 209 V. Typical fast response times are less than 1.0 ps from 0 V to Breakdown Voltage. Bourns ® Chip Diodes conform to JEDEC standards, are easy to handle with standard pick and place equipment and the flat configuration minimizes roll away. How to Order 5.0SMDJ 12 CA - H Package 5.0SMDJ = SMC/DO-214AB Working Peak Reverse Voltage 12 = 12 VRWM (Volts) Suffix A = 5 % Tolerance Unidirectional Device CA = 5 % Tolerance Bidirectional Device Reel (Blank) = 13-inch Reel -H = 7-inch Reel *RoHS COMPLIANT LEAD FREE *RoHS COMPLIANTVERSIONS AVAILABLE LEAD FREE VERSIONS ARE RoHS COMPLIANT* Asia-Pacific: Tel: +886-2 2562-4117 Email: asiacus@bourns.com Europe: Tel: +36 88 520 390 Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 Email: americus@bourns.com www.bourns.com
Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. 5.0SMDJ Transient Voltage Suppressor Diode Series Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) Unidirectional Device Bidirectional Device Breakdown Voltage VBR (Volts) Reverse Standoff Voltage Maximum Reverse Leakage @ VRWM Maximum Clamping Voltage @ IPP Peak Pulse Current Part Number Part Marking Part Number Part Marking Min. Max. @ IT (mA) VRWM (V) IR (μA) VC (V) IPP (A) 5.0SMDJ170A 5PHR 189.0 209 1 170 2 275.0 18.2
Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. 5.0SMDJ Transient Voltage Suppressor Diode Series Recommended Footprint Physical Specifications No cathode band indicates bidirectional device DIMENSIONS: MM (INCHES) Dimension SMC (DO-214AB) A 6.60 - 7.11 (0.260 - 0.280) B 5.59 - 6.22 (0.220 - 0.245) C 2.90 - 3.20 (0.114 - 0.126) D 0.15 - 0.31 (0.006 - 0.112) E 7.75 - 8.13 (0.305 - 0.320) F 0.05 - 0.20 (0.002 - 0.008) G 2.01 - 2.62 (0.080 - 0.103) H 0.76 - 1.52 (0.030 - 0.060) DIMENSIONS: MM (INCHES) Dimension SMC (DO-214AB) A (Max.) 4.69 (0.185) B (Min.) 3.07 (0.121) C (Min.) 1.53 (0.060) C B C B MM (INCHES)DIMENSIONS: A CATHODE BAND (UNIDIRECTIONAL DEVICES ONLY) G H E F D A C B C B MM (INCHES)DIMENSIONS: A CATHODE BAND (UNIDIRECTIONAL DEVICES ONLY) G H E F D A Environmental Specifications
0 1.0 2.0 3.0 4.0 T, Time (ms) IP, Peak Pulse Current (%) TA=25 °C TP TR=10 µs Half value= IRSM Peak value (IRSM) Pulse width (TP) is defined as that point where the peak current decays to 50 % of IPSM. 10 x 1000 waveform as defined by R.E.A. 100 05 025 75 100 150 125 175 200 Junction Temperature ( Peak Pulse Derating in Percent of Peak Power or Current °C) 10 x 1000 Waveform as Defined by R.E.A. Peak Forward Surge Current (Amps) 250 200 150 100 300 1 25 10 20 50 100 Number of Cycles at 60 Hz
300 A at 1 cycle
100 A at 80 cycles
4.0 5.0 3.0 2.0 1.0 0.0 05 0 25 75 100 150125 175 200 TL, Lead Temperature (°C) PM(AV) Steady State Power Dissipation (W) 6.0 6.5 5.5 4.5 3.5 2.5 1.5 0.5 0.1 µs 1.0 µs 10 µs 100 µs 1.0 ms 10 ms t d - Pulse Width (sec.) 0.1 100 1000PPPM - Peak Pulse Power (kW) TA = 25 °C 8.0 x 8.0 mm (0.31 x 0.31 in.) Copper Pad Areas
60 Hz Resistive or
CJ - Junction Capacitance (pF) 100000 10000 100 11 0 100 1000 VBR - Reverse Breakdown Voltage (V) 1000 Unidirectional @ VR Bidirectional @ VR Unidirectional v=0v Bidirectional v=0v TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 5.0SMDJ Transient Voltage Suppressor Diode Series Rating & Characteristic Curves Pulse Derating Curve Maximum Non-Repetitive Surge Current Pulse Waveform Typical Junction Capacitance Pulse Rating Curve Steady State Power Derating Curve Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
F E T 120 ° D D1 C Index Hole W B 10 pitches (min.) Direction of Feed 10 pitches (min.) End Trailer Device Leader Start d CDDFN5-0504N - TVS/Steering Diode Array Packaging Information The product will be dispensed in tape and reel format (see diagram below). Devices are packed in accordance with EIA standard EIA-481-D and specifications shown here. DIMENSIONS: MM (INCHES) Item Symbol SMC (DO-214AB) 7-Inch Reel 13-Inch Reel Carrier Width A 6.0 ± 0.20 (0.236 ± 0.079) Carrier Length B 8.3 ± 0.20 (0.327 ± 0.008) Carrier Depth C 2.5 ± 0.20 (0.098 ± 0.008) Sprocket Hole d 1.50 ± 0.10 (0.059 ± 0.004) Reel Outside Diameter D 178 (7.008) 330 (12.992) Reel Inner Diameter D1 50.0 (1.969) MIN. Feed Hole Diameter D2 13.0 +0.50/-0.20 Sprocket Hole Position E 1.75 ± 0.10 (0.069 ± 0.004) Punch Hole Position F 7.50 ± 0.10 (0.295 ± 0.004) Punch Hole Pitch P 8.00 ± 0.10 (0.315 ± 0.004) Sprocket Hole Pitch P0 4.00 ± 0.10 (0.157 ± 0.004) Embossment Center P1 2.00 ± 0.10 (0.079 ± 0.004) Overall Tape Thickness T 0.30± 0.10 (0.012 ± 0.004) Tape Width W 16.00 ± 0.30 (0.630 ± 0.012) Reel Width W1 22.4 (0.882) MAX. Quantity per Reel -- 500 3,000 5.0SMDJ Transient Voltage Suppressor Diode Series Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and its affiliates (collectively, “Bourns”). Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change without notice. Users should check for and obtain the latest relevant information before placing orders and should verify that such information is current and complete. The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions and statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical requirements in generic applications. The characteristics and parameters of a Bourns® product in a user application may vary from the data sheet characteristics and parameters due to a combination of the Bourns® product with other components in the user’s application or due to the environment of the user application itself. Such characteristics and parameters also can and do vary in different applications and actual performance may vary over time. Users should always verify actual performance of the Bourns® product in their specific devices and applications, and make their own independent judgments about how much additional test margin to design in to compensate for differences between laboratory and real world conditions. Unless Bourns has explicitly designated an individual Bourns® product as meeting the requirements of a particular industry standard (e.g., ISO/TS 16949) or a particular qualification (e.g., UL listed or recognized), Bourns is not responsible for any failure of an individual Bourns® product to meet such industry standard requirements or particular qualification. Users of Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to their applications. Bourns® products are not recommended, authorized or intended for use in nuclear, military, lifesaving, life-critical or life sustaining applications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or environmental damage. Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any Bourns® products in such unauthorized applications is at the user’s sole risk. Life-critical applications include devices identified by the U.S. Food and Drug Administration as Class III devices and generally equivalent classifications outside of the United States. Bourns® standard products that are designed and tested for use in automotive applications will be described on the applicable data sheets as compliant with the applicable AEC-Q standard. Use of any other Bourns® standard products in an automotive application is not recommended, authorized or intended and will be at the user’s sole risk. Bourns® standard products are not tested to comply with the United States Federal Aviation Administration or any other generally equivalent governmental organization standard applicable to products designed or manufactured for use in aircraft or space applications. Bourns® standard products that are designed and tested for use in aircraft or space applications will be described on the applicable data sheets as compliant with the RTCA DO-160 standard. Use of any other Bourns® standard product in an aircraft or space application is not recommended, authorized or intended and will be at the user’s sole risk. The use and level of testing applicable to Bourns® custom products shall be negotiated on a case-by-case basis by Bourns and the user for which such Bourns® custom products are specially designed. Absent a written agreement between Bourns and the user regarding the use and level of testing, the provisions above applicable to Bourns® standard products shall also apply to such Bourns® custom products. Users shall not sell, transfer, export or re-export any Bourns® products or technology for use in activities which involve the design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor use Bourns® products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions apply to all uses and applications that violate national or international prohibitions, including embargos or international regulations. Further, Bourns® products, technology or technical data may not under any circumstance be exported or re-exported to countries subject to international sanctions or embargoes and Bourns® products may not, without prior authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party that is ineligible to receive U.S. commodities, software, or technical data. To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability arising out of the application or use of any Bourns® standard product, (ii) any and all liability, including, without limitation, special, punitive, consequential or incidental damages, and (iii) any and all implied warranties, including implied warranties of fitness for particular purpose, non-infringement and merchantability. C1753 08/17