5.0SMDJ85A

5.0SMDJ11A SY

Document overview

• Manufacturer or author: Provided By digicamel.com
• PDF pages: 7

Technical content

F eatures For surface mounted applications in order to optimize board space Low profile package Built in strain relief Glass p assivated j unction Low inductance Excellent clamping capability 5000W peak pulse power capability at 10/1000 μ s waveform, r epetition r ate (duty cycle): 0.0 Fast response time Typical I R less than 2 μ A High Temperature soldering: 260 /10 seconds at terminals Plastic package has underwriters laboratory flammability 94V Meets MSL level 1, per J STD 020 Safety certification: UL: E244458 IEC61000 ESD 30KV Air, 30KV contact compliance Mechanical Data Case: JEDEC DO 214AB. Molded plastic over glass passivated junction Terminal: Tin plated solderable per MIL STD 750, Method 2026 Polarity: Color band denotes cathode except bi directional models Standard Packaging: 16mm tape (EIA STD RS 481) Weight: 0.30g

Applications

Low frequency signal transmission line (RS232, RS485, etc.) Maximum Ratings and Characteristics Ratings at 25 ambient temperature unless otherwise specified. Rating Symbol Value Units Peak pulse power dissipation at 10/1000μs waveform (Note1, Note2, Fig.1) P PPM Minimum 5000 W atts Peak pulse current of at 10/1000μs waveform (Note 1, Fig.3) I PPM See Table A mps Steady state power dissipation at T A =50 (Fig.5) P M (AV) 6.5 W atts Peak forward surge current, 8.3ms single half sine wave superimposed on rated load, (JEDEC Method) (Note3, Fig.6) I FSM 300 A mps Operating junction and Storage Temperature Range. T J STG 5 to +150 Typical thermal resistance junction to lead R θJL Typical thermal resistance junction to ambient R θJA Notes: 1. Non repetitive current pulse, per Fig.3 and derated above T A =25 per Fig.2. 2. Mounted on 8.0mm 8.0mm copper pads to each terminal. 3. 8.3ms single half sine wave, or equivalent square wave, duty cycle=4 pulses per minutes maximum. 5.0SMDJ11A THRU 5.0SMDJ250CA Transient Voltage Suppressors (TVS) Data Sheet www.shunyegroup.com.cn V2.22

T Test Current Maximum Clamping Voltage PP Peak Pulse Current Reverse Leakage RWM U nidirectional B idirectional UNI BI V RWM (V) V BR (V) I T (mA) V C (V) I PP (A) I R (μA) 5.0SMDJ11A 5.0SMDJ11CA 5PEN 5BEN 11.0 12.20 13.50 18.2 275.00 800 5.0SMDJ12A 5.0SMDJ12CA 5PEP 5BEP 12.0 13.30 14.70 19.9 252.00 800 5.0SMDJ13A 5.0SMDJ13CA 5PEQ 5BEQ 13.0 14.40 15.90 21.5 233.00 500 5.0SMDJ14A 5.0SMDJ14CA 5PER 5BER 14.0 15.60 17.20 23.2 216.00 200 5.0SMDJ15A 5.0SMDJ15CA 5PES 5BES 15.0 16.70 18.50 24.4 205.00 100 5.0SMDJ16A 5.0SMDJ16CA 5PET 5BET 16.0 17.80 19.70 26.0 193.00 5.0SMDJ17A 5.0SMDJ17CA 5PEU 5BEU 17.0 18.90 20.90 27.6 181.00 5.0SMDJ18A 5.0SMDJ18CA 5PEV 5BEV 18.0 20.00 22.10 29.2 172.00 5.0SMDJ20A 5.0SMDJ20CA 5PEW 5BEW 20.0 22.20 24.50 32.4 155.00 5.0SMDJ22A 5.0SMDJ22CA 5PEX 5BEX 22.0 24.40 26.90 35.5 141.00 5.0SMDJ24A 5.0SMDJ24CA 5PEZ 5BEZ 24.0 26.70 29.50 38.9 129.00 5.0SMDJ26A 5.0SMDJ26CA 5PFE 5BFE 26.0 28.90 31.90 42.1 119.00 5.0SMDJ28A 5.0SMDJ28CA 5PFG 5BFG 28.0 31.10 34.40 45.4 110.00 5.0SMDJ30A 5.0SMDJ30CA 5PFK 5BFK 30.0 33.30 36.80 48.4 103.00 Dimensions (SMC/DO 214AB) D D L T d H T H Symbol Millimeters Inches Min. Max. Min. Max. L 6.60 7.11 0.260 0.280 D 5.59 6.22 0.220 0.245 2.90 3.20 0.114 0.126 T 7.75 8.13 0.305 0.320 0.76 1.52 0.030 0.060 d 0.203 0.008 H 2.20 2.80 0.087 0.110 2.06 2.62 0.079 0.103 E lectrical Characteristics T A =25 www.shunyegroup.com.cn V2.22 5.0SMDJ11A THRU 5.0SMDJ250CA

5.0SMDJ33A 5.0SMDJ33CA 5PFM 5BFM 33.0 36.70 40.60 53.3 93.90 5.0SMDJ36A 5.0SMDJ36CA 5PFP 5BFP 36.0 40.00 44.20 58.1 86.10 5.0SMDJ40A 5.0SMDJ40CA 5PFR 5BFR 40.0 44.40 49.10 64.5 77.60 5.0SMDJ43A 5.0SMDJ43CA 5PFT 5BFT 43.0 47.80 52.80 69.4 72.10 5.0SMDJ45A 5.0SMDJ45CA 5PFV 5BFV 45.0 50.00 55.30 72.7 68.80 5.0SMDJ48A 5.0SMDJ48CA 5PFX 5BFX 48.0 53.30 58.90 77.4 64.70 5.0SMDJ51A 5.0SMDJ51CA 5PFZ 5BFZ 51.0 56.70 62.70 82.4 60.70 5.0SMDJ54A 5.0SMDJ54CA 5PGE 5BGE 54.0 60.00 66.30 87.1 57.50 5.0SMDJ58A 5.0SMDJ58CA 5PGG 5BGG 58.0 64.40 71.20 93.6 53.50 5.0SMDJ60A 5.0SMDJ60CA 5PGK 5BGK 60.0 66.70 73.70 96.8 51.70 5.0SMDJ64A 5.0SMDJ64CA 5PGM 5BGM 64.0 71.10 78.60 103.0 48.60 5.0SMDJ70A 5.0SMDJ70CA 5PGP 5BGP 70.0 77.80 86.00 113.0 44.30 5.0SMDJ75A 5.0SMDJ75CA 5PGR 5BGR 75.0 83.30 92.10 121.0 41.40 5.0SMDJ78A 5.0SMDJ78CA 5PGT 5BGT 78.0 86.70 95.80 126.0 39.70 5.0SMDJ85A 5.0SMDJ85CA 5PGV 5BGV 85.0 94.40 104.00 137.0 36.50 5.0SMDJ90A 5.0SMDJ90CA 5PGX 5BGX 90.0 100.00 111.00 146.0 34.30 5.0SMDJ100A 5.0SMDJ100CA 5PGZ 5BGZ 100.0 111.00 123.00 162.0 30.90 5.0SMDJ110A 5.0SMDJ110CA 5PHE 5BHE 110.0 122.00 135.00 177.0 28.30 5.0SMDJ120A 5.0SMDJ120CA 5PHG 5BHG 120.0 133.00 147.00 193.0 26.00 5.0SMDJ130A 5.0SMDJ130CA 5PHK 5BHK 130.0 144.00 159.00 209.0 24.00 5.0SMDJ150A 5.0SMDJ150CA 5PHM 5BHM 150.0 167.00 185.00 243.0 20.60 5.0SMDJ160A 5.0SMDJ160CA 5PHP 5BHP 160.0 178.00 197.00 259.0 19.30 5.0SMDJ170A 5.0SMDJ170A 5PHR 5BHR 170.0 189.00 209.00 275.0 18.20 5.0SMDJ180A 5.0SMDJ180CA 5HHT 5BHT 180.0 201.00~222.00 292.0 17.1 5.0SMDJ190A 5.0SMDJ190CA 5HHV 5BHU 190.0 211.00~243.00 308.0 16.2 5.0SMDJ200A 5.0SMDJ200CA 5HHX 5BHV 200.0 224.00~247.00 324.0 15.4 5.0SMDJ210A 5.0SMDJ210CA 5HHZ 5BHW 210.0 237.00~269.00 340.0 14.7 5.0SMDJ220A 5.0SMDJ220CA 5HIE 5BHX 220.0 246.00~272.00 356.0 14.0 5.0SMDJ250A 5.0SMDJ250CA 5HIG 5BHZ 250.0 279.00~309.00 405.0 12.3 Part Number Device Marking Code Reverse Stand Off Voltage Breakdown Voltage T Test Current Maximum Clamping Voltage PP Peak Pulse Current Reverse Leakage RWM U nidirectional B idirectional UNI BI V RWM (V) V BR (V) I T (mA) V C (V) I PP (A) I R (μA) E lectrical Characteristics T A =25 www.shunyegroup.com.cn V2.22 5.0SMDJ11A THRU 5.0SMDJ250CA

Figure 3. Pulse Waveform Figure 4. Typical Junction Capacitance

100 Peak Value IPPM

Figure 5. Steady State Power Dissipation Derating Figure 6. Maximum Non Figure 1. Peak Pulse Power Rating Curve Figure 2. Pulse Derating Curve

Recommended Soldering Conditions Reflow Soldering T P T L t S P r e h e a t T S m a x T S m i n R a m p u p R a m p d o w n C r i t i c a l Z o n e T L t o T P t P t L t t o P e a k T i m e T e m p e r a t u r e Recommended Conditions Profile Feature Pb Free Assembly Average ramp up rate (T L to T P /second max. Preheat Temperature Min (T S min Temperature Max (T S max Time (min to max) (t S 150 200 180 seconds T S max to T L Ramp up Rate /second max. Time maintained above: Temperature (T L Time (t L 217 150 seconds Peak Temperature (T P 260 Time within 5 of actual Peak Temperature (t P 40 seconds Ramp down Rate /second max. Time 25 to Peak Temperature 8 minutes max. www.shunyegroup.com.cn V2.22 5.0SMDJ11A THRU 5.0SMDJ250CA

5.0SMDJ XXX C A Bidirectional Series Code VRWM Voltage 5% VBR Voltage Tolerance XXXX Package Code TR7:7 inch reel package TR13:13 inch reel package Ordering Code for Different Package 7 inch reel package: Add suffix “ /TR7 ” at the end of the part number, such as 5.0SMDJXXXCA/TR7 13 inch reel package: Add suffix “ /TR13 ” at the end of the part number, such as 5.0SMDJXXXCA/TR13 Marking Code Part Number Code Cathode Band Periodic Code XXX Logo XX Marking Code Periodic Code XXX Logo XX Marking Code www.shunyegroup.com.cn V2.22 5.0SMDJ11A THRU 5.0SMDJ250CA

F W T B B SECTION B-B A A SECTION A-A Symbol Dimension (mm) W 16.00 ± 0. 4.00 ± 0.10 8.00 ± 0.10 2.00 ± 0. Φ 1.5 ± 0. Φ 1.5 ± 0. E 1.75 ± 0.10 F 7.50 ± 0. 6.27 ± 0.1 8.30 ± 0.1 3.15 ± 0.1 T 0.30 ± 0. Reel Φ 178.0 2.0 Φ 50.0Min. Φ 13.0 0.5 20.0 2.0 Q uantity: 500PCS Reel Φ 330.0 2.0 Φ 13.5 0.5 H 2.5 1.0 20.0 2.0 Q uantity: 3000PCS www.shunyegroup.com.cn V2.22 5.0SMDJ11A THRU 5.0SMDJ250CA