5.0SMDJ11 DCCOM

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 4

Technical content

  • Glass passivated junction * 5000 Watts Peak Pulse Power capability on 10/1000 µs waveform * Excellent clamping capability * Low zener impedance * Fast response time MECHANICAL DA T A 5.0SMDJ11 THRU 5.0SMDJ440CA TECHNICAL SPECIFICATIONS OF TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE RANGE - 11 to 440Volts PEAK PULAE POWER - 5000 Watts Dimensions in inches and (millimeters) DEVICES FOR BIPOLAR APPLICA TIONS Electrical characteristics apply in both directions DC COMPONENTS CO., LTD. Ratings at 25OC ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load, For capacitive load, derate current by 20%. MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS 60Hz Resistive or Inductive Load Maximum Instantaneuos Forwaard Voltage at 50A for Unidirectional only Peak Pulse Power Dissipation on 10/1000 µs waveform (Note1,FIG.1) Steady State Power Dissipation at T = 75OC Lead Lengths .375"(9.5mm) (Note 2) Peak Forward Surge Current, 8.3ms single half sine-wave superimposed on rated load(JEDEC Method) (Note 3) Operating and Storage T emperature Range SYMBOL PPPM PM(AV) IFSM TJ , TSTG VF V ALUE Minimum 5000 6.5 300 -55 to + 175 3.5 UNITS Watts Watts OC Amps Volts NOTES : 1. Non-repetitive current pulse, per Fig.3 and derated above TA = 25OC per Fig. 2. 2. Mounted on Copper Leaf area of 0.8 X 0.8"( 20 X 20mm ) per Fig. 5 3. 8.3ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum. SMC (DO-214AB) .245(6.2) .220(5.6) .280(7.1) .260(6.6) .128(3.3) .004(0.1) .008(0.2) .004(0.1) .060(1.5) .030(0.8) .102(2.6) .303(7.7) * Case: Molded plastic * Epoxy: UL 94V-0 rate flame retardant * Mounting position: Any * Weight: 0.24 gram *Terminals: Solder plated solderable per MIL-STD-750, Method 2026 * Polarity: As marked

R DC COMPONENTS CO., LTD. RATING AND CHARACTERISTIC CURVES (5.0SMDJ11 THRU 5.0SMDJ440CA) FIG. 1 - PEAK PULSE POWER RATING CURVE Non-Repetitive Pulse Waveform Shown in Fig.3 TA = 25OC0.1 1.0 100 0.1µS 1.0µS 10µS 100µS 1.0mS 10mS PPM, PEAK PULSE POWER, kW TP, PULSE WIDTH, sec PEAK PULSE POWER (PPP) OR CURRENT (IPP) DERATING IN PERCENTAGE, %0 TA, AMBIENT TEMPERATURE, (OC) FIG. 2 - PULSE DERATING CURVE 100 25 50 75 100 125 150 175 200 FIG. 3 - PULSE WAVEFORM IPPM, PEAK PULSE CURRENT, % tr = 10 µsec. Pulse Width (td) is Defined as the Point Where the Peak Current Decays to 50% of IPPM Peak Value IPPM HALF VALUE - IPPM 10/1000µsec. Waveform as Defined by R.E.A. td0 100 150 1.0 2.0 3.0 4.0 t, TIME, mS 100 10000 100000CJ, CAPACITANCE, pF FIG. 4 - TYPICAL JUNCTION CAPACITANCE f = 1.0 MHz Vsig = 50mVp-p TJ = 25OC 1.0 100 500 V(BR), BREAKDOWN VOLTAGE, VOLTS FIG. 5 - STEADY STATE POWER DERTING CURVE PM(AV), STEADY STATE POWER DISSIATION, WATTS 60Hz Resistive or Inductive Load TL, LEAD TEMPERATURE (OC) 25 50 75 100 125 150 175 200 300 400 FIG. 6 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT UNIDIRECTIONAL IFSM, PEAK FORWARD SURGE CURRENT AMPERES 8.3ms Single Half Sine-Wave (JEDEC Method) NUMBER OF CYCLES AT 60 Hz 1 10 100 VR = RATED STAND-OFF VOLTAGE Measured at Zero Bias 200 L = 0.375”(9.5mm) Lead Lengths 0.8X0.8X0.040” (20X20mm) Copper Heat Sinks

R DC COMPONENTS CO., LTD. 5.0SMDJ (5000W) SERIES TRANSIENT VOLTAGE SUPPRESSORS 5.0SMDJ58 58 64.4 78.7 1 5 103 49.03 5.0SMDJ60 60 66.7 81.5 1 5 107 47.20 Reverse Stand-off Voltage Breakdown Voltage @ IT Test Current ITVRWM Maximum Reverse Leakage @ VRWM Maximum Clamping Voltage @ IPP Maximum Peak Pulse Current VBR V Min. Max. VV mA µA µA UNI- BI- IR VC IPP V A TYPE

R DC COMPONENTS CO., LTD. 5.0SMDJ (5000W) SERIES TRANSIENT VOLTAGE SUPPRESSORS 5.0SMDJ64 64 71.1 86.9 1 5 114 44.30 5.0SMDJ64A 64 71.1 78.6 1 5 103 49.03 5.0SMDJ70 70 77.8 95.1 1 5 125 40.40 5.0SMDJ70A 70 77.8 86.0 1 5 113 44.69 5.0SMDJ75 75 83.3 102 1 5 134 37.69 5.0SMDJ75A 75 83.3 92.1 1 5 121 41.74 5.0SMDJ78 78 86.7 106 1 5 139 36.33 5.0SMDJ78A 78 86.7 95.8 1 5 126 40.08 5.0SMDJ85 85 94.4 115 1 5 151 33.44 5.0SMDJ85A 85 94.4 104 1 5 137 36.86 5.0SMDJ90 90 100 122 1 5 160 31.56 5.0SMDJ90A 90 100 111 1 5 146 34.59 5.0SMDJ100 100 111 136 1 5 179 28.21 5.0SMDJ100A 100 111 123 1 5 162 31.17 5.0SMDJ110 110 122 149 1 5 196 25.77 5.0SMDJ110A 110 122 135 1 5 177 28.53 5.0SMDJ120 120 133 163 1 5 214 23.60 5.0SMDJ120A 120 133 147 1 5 193 26.17 5.0SMDJ130 130 144 176 1 5 231 21.86 5.0SMDJ130A 130 144 159 1 5 209 24.16 5.0SMDJ140 140 155 190.4 1 5 250.6 20.15 5.0SMDJ140A 140 155 171 1 5 226.8 22.27 5.0SMDJ150 150 167 204 1 5 268 18.84 5.0SMDJ150A 150 167 185 1 5 243 20.78 5.0SMDJ160 160 178 218 1 5 287 17.60 5.0SMDJ160A 160 178 197 1 5 259 19.50 5.0SMDJ170 170 189 231 1 5 304 16.61 5.0SMDJ170A 170 189 209 1 5 275 18.36 5.0SMDJ180 180 200 244.8 1 5 322.2 15.67 5.0SMDJ180A 180 200 220 1 5 291.6 17.32 5.0SMDJ190 190 211 258.4 1 5 340.1 14.85 5.0SMDJ190A 190 211 232 1 5 307.8 16.41 5.0SMDJ200A 200 224 247 1 5 324 9.26 5.0SMDJ220A 220 246 272 1 5 356 8.43 5.0SMDJ250A 250 279 309 1 5 405 7.41 5.0SMDJ300A 300 335 371 1 5 486 6.17 5.0SMDJ350A 350 391 432 1 5 567 5.29 5.0SMDJ400A 400 447 494 1 5 648 4.63 5.0SMDJ440A 440 492 543 1 5 713 4.21 Reverse Stand-off Voltage Breakdown Voltage @ IT Test Current ITVRWM Maximum Reverse Leakage @ VRWM Maximum Clamping Voltage @ IPP Maximum Peak Pulse Current VBR V Min. Max. VV mA µA µA UNI- BI- IR VC IPP V A TYPE NOTES: 1. VBR measured after IT applied for 300µs. IT= Square Wave Pulse or equivalent. 5.0SMDJ440C, 5.0SMDJ440CA).Electrical characteristics apply in both directions. 3. For bidirectional types having VRWM of 10 volts and less, the ID limit is doubled.