DATASHEET SEARCH SITE

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 6

Technical content

Features

■ RoHS compliant* and halogen free** ■ Surface mount SMC package ■ Standoff voltage: 5 to 170 volts ■ Peak Pulse Power: 5000 watts ■ Typical temperature coefficient: ΔVBR = 0.1 % x VBR @ 25 °C x ΔT Additional Information Click these links for more information: PRODUCT SELECTOR TECHNICAL LIBRARY INVENTORY SAMPLES CONTACT Agency Recognition

Description

UL File Number: E153537 General Information Portable communications, computing and video equipment manufacturers are challenging the semiconductor industry to develop increasingly higher power density circuit protection components. Bourns offers Transient Voltage Suppressor Diodes for surge and ESD protection applications, in compact chip package DO-214AB (SMC) size format. The Transient Voltage Suppressor series offers a choice of Working Peak Reverse Voltage from 5 V up to 170 V and Breakdown Voltage up to 209 V. Typical fast response times are less than 1.0 ps from 0 V to Breakdown Voltage. Bourns ® Chip Diodes conform to JEDEC standards, are easy to handle with standard pick and place equipment and the flat configuration minimizes roll away. Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) Parameter Symbol Value Unit Minimum Peak Pulse Power Dissipation (Tp = 1 ms) (Note 1,2) PPK 5000 Watts Peak Forward Surge Current 8.3 ms Single Half Sine Wave Superimposed on Rated Load (JEDEC Method) (Note 3,4) IFSM 300 Amps Steady State Power Dissipation @ TL = 50 °C PM(AV) 6.5 Watts Maximum Instantaneous Forward Voltage @ IPP = 100 A (For Unidirectional Units Only) VF 5 Volts Operating Temperature Range TJ -55 to +150 °C Storage Temperature Range T STG -55 to +150 °C 1. Non-repetitive current pulse, per Pulse Waveform graph and derated above T A = 25 °C per Pulse Derating Curve. 2. Thermal Resistance Junction to Lead. 3. 8.3 ms Single Sine Wave duty cycle = 4 pulses maximum per minute (unidirectional units only). 4. Mounted on 8.0 mm x 8.0 mm copper pad area to each terminal. *RoHS Directive 2015/863, Mar 31, 2015 and Annex. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov How to Order 5.0SMDJ 12 CA - H Package 5.0SMDJ = SMC/DO-214AB Working Peak Reverse Voltage 12 = 12 VRWM (Volts) Suffix A = 5 % Tolerance Unidirectional Device CA = 5 % Tolerance Bidirectional Device Reel (Blank) = 13-inch Reel -H = 7-inch Reel Asia-Pacific: Tel: +886-2 2562-4117 • Email: asiacus@bourns.com EMEA: Tel: +36 88 885 877 • Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com www.bourns.com

5.0SMDJ Transient Voltage Suppressor Diode Series Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) Unidirectional Device Bidirectional Device Breakdown Voltage VBR (Volts) Reverse Standoff Voltage Maximum Reverse Leakage @ VRWM Maximum Clamping Voltage @ Ipp (10/1000 μs) Maximum Peak Pulse Current (10/1000 μs) Maximum Clamping Voltage @ Ipp (8/20 μs) Maximum Peak Pulse Current (8/20 μs) Part Number Part Marking Part Number Part Marking Min. Max. @ IT (mA) VRWM (V) IR (μA) Vc (V) Ipp (A) Vc (V) Ipp (A) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

5.0SMDJ Transient Voltage Suppressor Diode Series Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Product Dimensions Recommended Footprint B C A CATHODE BAND (UNIDIRECTIONAL DEVICES ONLY) G H E F D Dimension SMC (DO-214AB) A 6.60 - 7.11 (0.260 - 0.280) B 5.59 - 6.22 (0.220 - 0.245) C 2.90 - 3.20 (0.114 - 0.126) D 0.15 - 0.31 (0.006 - 0.012) E 7.75 - 8.13 (0.305 - 0.320) F 0.05 - 0.20 (0.002 - 0.008) G 2.01 - 2.62 (0.080 - 0.103) H 0.76 - 1.52 (0.030 - 0.060) DIMENSIONS: MM (INCHES) DIMENSIONS: MM (INCHES) C B A Dimension SMC (DO-214AB) A (Max.) 4.69 (0.185) B (Min.) 3.07 (0.121) C (Min.) 1.53 (0.060) Physical Specifications No cathode band indicates bidirectional device Environmental Specifications

5.0SMDJ Transient Voltage Suppressor Diode Series Rating & Characteristic Curves Pulse Derating Curve Maximum Non-Repetitive Surge Current 100 0 1.0 2.0 3.0 4.0 T, Time (ms) IP, Peak Pulse Current (%) TA=25 °C TP TR=10 µs Half value= IRSM Peak value (IRSM) Pulse width (TP) is defined as that point where the peak current decays to 50 % of IPSM. 10 x 1000 waveform as defined by R.E.A. 100 05 0 25 75 100 150 125 175 200 Junction Temperature ( Peak Pulse Derating in Percent of Peak Power or Current °C) 10 x 1000 Waveform as Defined by R.E.A. Peak Forward Surge Current (Amps) 250 200 150 100 300 1 2 5 10 20 50 100 Number of Cycles at 60 Hz

300 A at 1 cycle

100 A at 80 cycles

4.0 5.0 3.0 2.0 1.0 0.0 05 0 25 75 100 150 125 175 200 TL, Lead Temperature (°C) PM(AV) Steady State Power Dissipation (W) 6.0 6.5 5.5 4.5 3.5 2.5 1.5 0.5 0.1 µs 1.0 µs 10 µs 100 µs 1.0 ms 10 ms t d - Pulse Width (sec.) 0.1 100 1000PPPM - Peak Pulse Power (kW) TA = 25 °C 8.0 x 8.0 mm (0.31 x 0.31 in.) Copper Pad Areas

60 Hz Resistive or

CJ - Junction Capacitance (pF) 100000 10000 100 11 0 1 0 0 1 0 0 0 VBR - Reverse Breakdown Voltage (V) 1000 Unidirectional @ VR Bidirectional @ VR Unidirectional v=0v Bidirectional v=0v TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p Pulse Waveform Typical Junction Capacitance Pulse Rating Curve Steady State Power Derating Curve Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

5.0SMDJ Transient Voltage Suppressor Diode Series Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Packaging Information The product will be dispensed in tape and reel format (see diagram below). P A F E T 120 ° D D1 C Index Hole W B 10 pitches (min.) Direction of Feed 10 pitches (min.) End Trailer Device Unidirectional Product Orientation Leader Start d DIMENSIONS: MM (INCHES) Devices are packed in accordance with EIA standard EIA-481-D and specifications shown here. Item Symbol SMC (DO-214AB) 7-Inch Reel 13-Inch Reel Carrier Width A 6.0 ± 0.20 (0.236 ± 0.079) Carrier Length B 8.3 ± 0.20 (0.327 ± 0.008) Carrier Depth C 2.5 ± 0.20 (0.098 ± 0.008) Sprocket Hole d 1.50 ± 0.10 (0.059 ± 0.004) Reel Outside Diameter D 178 (7.008) 330 (12.992) Reel Inner Diameter D 1 50.0 (1.969) MIN. Feed Hole Diameter D 2 13.0 +0.50/-0.20 Sprocket Hole Position E 1.75 ± 0.10 (0.069 ± 0.004) Punch Hole Position F 7.50 ± 0.10 (0.295 ± 0.004) Punch Hole Pitch P 8.00 ± 0.10 (0.315 ± 0.004) Sprocket Hole Pitch P 0 4.00 ± 0.10 (0.157 ± 0.004) Embossment Center P 1 2.00 ± 0.10 (0.079 ± 0.004) Overall Tape Thickness T 0.30± 0.10 (0.012 ± 0.004) Tape Width W 16.00 ± 0.30 (0.630 ± 0.012) Reel Width W 1 22.4 (0.882) MAX. Quantity per Reel -- 500 3,000 REV. 03/20

This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS\¸)V\\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\\[UV[PJL<ZLYZZOV\\SKJOLJRMVYHUKVI[HPU[OLSH[LZ[YLSL]HU[PUMVYTH[PVUHUK]LYPM\[OH[Z\\JOPUMVYTH[PVUPZJ\\YYLU[ and complete before placing orders for Bourns® products. The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical requirements in generic applications. The characteristics and parameters of a Bourns ®WYVK\\J[PUH\\ZLYHWWSPJH[PVUTH\]HY\ MYVT[OLKH[HZOLL[JOHYHJ[LYPZ[PJZHUKWHYHTL[LYZK\\L[VP[OLJVTIPUH[PVUVM[OL)V\\YUZ® product with other components PU[OL\\ZLY»ZHWWSPJH[PVUVYPP[OLLU]PYVUTLU[VM[OL\\ZLYHWWSPJH[PVUP[ZLSM;OLJOHYHJ[LYPZ[PJZHUKWHYHTL[LYZVMH)V\\YUZ® WYVK\\J[HSZVJHUHUKKV]HY\PUKPɈLYLU[HWWSPJH[PVUZHUKHJ[\\HSWLYMVYTHUJLTH\]HY\V]LY[PTL<ZLYZZOV\\SKHS^H\Z]LYPM\ the actual performance of the Bourns ®WYVK\\J[PU[OLPYZWLJPÄJKL]PJLZHUKHWWSPJH[PVUZHUKTHRL[OLPYV^UPUKLWLUKLU[ Q\\KNTLU[ZYLNHYKPUN[OLHTV\\U[VMHKKP[PVUHS[LZ[THYNPU[VKLZPNUPU[V[OLPYKL]PJLVYHWWSPJH[PVU[VJVTWLUZH[LMVY KPɈLYLUJLZIL[^LLUSHIVYH[VY\HUKYLHS^VYSKJVUKP[PVUZ <USLZZ)V\\YUZOHZL_WSPJP[S\KLZPNUH[LKHUPUKP]PK\\HS)V\\YUZ® product as meeting the requirements of a particular industry Z[HUKHYKLN0:6;: VYHWHY[PJ\\SHYX\\HSPÄJH[PVULN<3SPZ[LKVYYLJVNUPaLK)V\\YUZPZUV[YLZWVUZPISLMVYHU\ MHPS\\YLVMHUPUKP]PK\\HS)V\\YUZ®WYVK\\J[[VTLL[[OLYLX\\PYLTLU[ZVMZ\\JOPUK\\Z[Y\Z[HUKHYKVYWHY[PJ\\SHYX\\HSPÄJH[PVU<ZLYZ of Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to [OLPYKL]PJLZVYHWWSPJH[PVUZ Bourns®WYVK\\J[ZHYLUV[YLJVTTLUKLKH\\[OVYPaLKVYPU[LUKLKMVY\\ZLPUU\\JSLHYSPMLZH]PUNSPMLJYP[PJHSVYSPMLZ\\Z[HPUPUN HWWSPJH[PVUZUVYPUHU\V[OLYHWWSPJH[PVUZ^OLYLMHPS\\YLVYTHSM\\UJ[PVUTH\YLZ\\S[PUWLYZVUHSPUQ\\Y\KLH[OVYZL]LYLWYVWLY[\ VYLU]PYVUTLU[HSKHTHNL<USLZZL_WYLZZS\HUKZWLJPÄJHSS\HWWYV]LKPU^YP[PUNI\[^VH\\[OVYPaLK)V\\YUZYLWYLZLU[H[P]LZ on a case-by-case basis, use of any Bourns ®WYVK\\J[ZPUZ\\JO\\UH\\[OVYPaLKHWWSPJH[PVUZTPNO[UV[ILZHMLHUK[O\\ZPZH[ [OL\\ZLY»ZZVSLYPZR3PMLJYP[PJHSHWWSPJH[PVUZPUJS\\KLKL]PJLZPKLU[PÄLKI\[OL<:-VVKHUK+Y\\N(KTPUPZ[YH[PVUHZ*SHZZ000 KL]PJLZHUKNLULYHSS\LX\\P]HSLU[JSHZZPÄJH[PVUZV\\[ZPKLVM[OL<UP[LK:[H[LZ )V\\YUZL_WYLZZS\PKLU[PÄLZ[OVZL)V\\YUZ ®Z[HUKHYKWYVK\\J[Z[OH[HYLZ\\P[HISLMVY\\ZLPUH\\[VTV[P]LHWWSPJH[PVUZVUZ\\JO WYVK\\J[Z»KH[HZOLL[ZPU[OLZLJ[PVULU[P[SLK¸(WWSPJH[PVUZ¹<USLZZL_WYLZZS\HUKZWLJPÄJHSS\HWWYV]LKPU^YP[PUNI\[^V H\\[OVYPaLK)V\\YUZYLWYLZLU[H[P]LZVUHJHZLI\JHZLIHZPZ\\ZLVMHU\V[OLY)V\\YUZ®Z[HUKHYKWYVK\\J[ZPUHUH\\[VTV[P]L HWWSPJH[PVUTPNO[UV[ILZHMLHUK[O\\ZPZUV[YLJVTTLUKLKH\\[OVYPaLKVYPU[LUKLKHUKPZH[[OL\\ZLY»ZZVSLYPZR0M)V\\YUZ L_WYLZZS\PKLU[PÄLZHZ\\IJH[LNVY\VMH\\[VTV[P]LHWWSPJH[PVUPU[OLKH[HZOLL[MVYP[ZZ[HUKHYKWYVK\\J[ZZ\\JOHZPUMV[HPUTLU[ VYSPNO[PUNZ\\JOPKLU[PÄJH[PVUTLHUZ[OH[)V\\YUZOHZYL]PL^LKP[ZZ[HUKHYKWYVK\\J[HUKOHZKL[LYTPULK[OH[PMZ\\JO)V\\YUZ Z[HUKHYKWYVK\\J[PZJVUZPKLYLKMVYWV[LU[PHS\\ZLPUH\\[VTV[P]LHWWSPJH[PVUZP[ZOV\\SKVUS\IL\\ZLKPUZ\\JOZ\\IJH[LNVY\VM H\\[VTV[P]LHWWSPJH[PVUZ(U\YLMLYLUJL[V)V\\YUZ ®Z[HUKHYKWYVK\\J[PU[OLKH[HZOLL[HZJVTWSPHU[^P[O[OL(,*8Z[HUKHYK VY¸H\\[VTV[P]LNYHKL¹KVLZUV[I\P[ZLSMTLHU[OH[)V\\YUZOHZHWWYV]LKZ\\JOWYVK\\J[MVY\\ZLPUHUH\\[VTV[P]LHWWSPJH[PVU Bourns®Z[HUKHYKWYVK\\J[ZHYLUV[[LZ[LK[VJVTWS\^P[O<UP[LK:[H[LZ-LKLYHS(]PH[PVU(KTPUPZ[YH[PVUZ[HUKHYKZNLULYHSS\ VYHU\V[OLYNLULYHSS\LX\\P]HSLU[NV]LYUTLU[HSVYNHUPaH[PVUZ[HUKHYKHWWSPJHISL[VWYVK\\J[ZKLZPNULKVYTHU\\MHJ[\\YLKMVY \\ZLPUHPYJYHM[VYZWHJLHWWSPJH[PVUZ)V\\YUZL_WYLZZS\PKLU[PÄLZ)V\\YUZ® standard products that are suitable for use in aircraft VYZWHJLHWWSPJH[PVUZVUZ\\JOWYVK\\J[Z»KH[HZOLL[ZPU[OLZLJ[PVULU[P[SLK¸(WWSPJH[PVUZ¹<USLZZL_WYLZZS\HUKZWLJPÄJHSS\ HWWYV]LKPU^YP[PUNI\[^VH\\[OVYPaLK)V\\YUZYLWYLZLU[H[P]LZVUHJHZLI\JHZLIHZPZ\\ZLVMHU\V[OLY)V\\YUZ ® standard WYVK\\J[PUHUHPYJYHM[VYZWHJLHWWSPJH[PVUTPNO[UV[ILZHMLHUK[O\\ZPZUV[YLJVTTLUKLKH\\[OVYPaLKVYPU[LUKLKHUKPZH[ the user’s sole risk. ;OL\\ZLHUKSL]LSVM[LZ[PUNHWWSPJHISL[V)V\\YUZ ® custom products shall be negotiated on a case-by-case basis by Bourns and the user for which such Bourns®J\\Z[VTWYVK\\J[ZHYLZWLJPHSS\KLZPNULK(IZLU[H^YP[[LUHNYLLTLU[IL[^LLU)V\\YUZ HUK[OL\\ZLYYLNHYKPUN[OL\\ZLHUKSL]LSVMZ\\JO[LZ[PUN[OLHIV]LWYV]PZPVUZHWWSPJHISL[V)V\\YUZ® standard products shall also apply to such Bourns® custom products. Users shall not sell, transfer, export or re-export any Bourns®WYVK\\J[ZVY[LJOUVSVN\MVY\\ZLPUHJ[P]P[PLZ^OPJOPU]VS]L[OL KLZPNUKL]LSVWTLU[WYVK\\J[PVU\\ZLVYZ[VJRWPSPUNVMU\\JSLHYJOLTPJHSVYIPVSVNPJHS^LHWVUZVYTPZZPSLZUVYZOHSS[OL\\\ZL Bourns®WYVK\\J[ZVY[LJOUVSVN\PUHU\MHJPSP[\^OPJOLUNHNLZPUHJ[P]P[PLZYLSH[PUN[VZ\\JOKL]PJLZ;OLMVYLNVPUNYLZ[YPJ[PVUZ HWWS\[VHSS\\ZLZHUKHWWSPJH[PVUZ[OH[]PVSH[LUH[PVUHSVYPU[LYUH[PVUHSWYVOPIP[PVUZPUJS\\KPUNLTIHYNVZVYPU[LYUH[PVUHS YLN\\SH[PVUZ-\\Y[OLY)V\\YUZ® products and Bourns technology and technical data may not under any circumstance be exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without WYPVYH\\[OVYPaH[PVUMYVT)V\\YUZHUKVY[OL<:.V]LYUTLU[ILYLZVSK[YHUZMLYYLKVYYLL_WVY[LK[VHU\WHY[\UV[LSPNPISL [VYLJLP]L<:JVTTVKP[PLZZVM[^HYLHUK[LJOUPJHSKH[H ;V[OLTH_PT\\TL_[LU[WLYTP[[LKI\HWWSPJHISLSH^)V\\YUZKPZJSHPTZPHU\HUKHSSSPHIPSP[\MVYZWLJPHSW\\UP[P]LJVUZLX\\LU[PHS PUJPKLU[HSVYPUKPYLJ[KHTHNLZVYSVZ[YL]LU\\LZVYSVZ[WYVÄ[ZHUKPPHU\HUKHSSPTWSPLK^HYYHU[PLZPUJS\\KPUNPTWSPLK^HYYHU[PLZ VMÄ[ULZZMVYWHY[PJ\\SHYW\\YWVZLUVUPUMYPUNLTLU[HUKTLYJOHU[HIPSP[\ )RU\\RXUFRQYHQLHQFHFRSLHVRIWKLV/HJDO'LVFODLPHU1RWLFHZLWK*HUPDQ6SDQLVK-DSDQHVH7UDGLWLRQDO&KLQHVHDQG6LPSOLÀHG&KLQHVH bilingual versions are available at: Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf