5.0SMDJ UNSEMI
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 8
Technical content
Features
- Non-repetitive current pulse, per Fig. 3 and derated above TA = 25°C per Fig.2. 3. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle = 4 pulses per minutes maximum. 4. VF < 3.5V for VBR < 200V and VF< 6.5V for VBR > 201V.
Description
Uni-directional Bi-directional
Applications
Notes: ROHS Revision March 1,2022 Surface Mount Transient Voltage Suppressors (TVS) www.unsemi.com.tw
11 To 440V 5000W
www.unsemi.com.tw Cathode Bi-directional Anode Uni-direction For technical questions, contact: tech@unsemi.com.tw Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information.1/7 Functional Diagram
Surface Mount Transient Voltage Suppressors (TVS) Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information. Part Number Uni Bi Reverse Stand-Off Voltage VRWM (V) Breakdown Voltage VBR (V) @IT Maximum Clamping Voltage VC @IPP (V) Maximum Peak Pulse Current IPP (A) Maximum Reverse Leakage IR @VRWM (μA) Test Current IT (mA) MIN MAX Marking Unl Bi 800 800 800 800 500 500 200 200 100 100 20.1 18.2 22.0 19.9 23.8 21.5 25.8 23.2 26.9 24.4 28.8 26.0 30.5 27.6 32.2 29.2 34.0 30.8 35.8 32.4 39.4 35.5 43.0 38.9 46.6 42.1 50.0 45.4 53.5 48.4 59.0 53.3 64.3 58.1 71.4 64.5 76.7 69.4 80.3 72.7 85.5 77.4 91.1 82.4 96.3 87.1 103.0 93.6 251.24 277.47 229.55 253.77 212.18 234.88 195.74 217.67 187.73 206.97 175.35 194.23 165.57 182.97 156.83 172.95 148.49 164.07 141.06 155.86 128.17 142.25 117.44 129.82 108.37 119.95 101.00 111.23 94.39 104.34 85.59 94.75 78.54 86.92 70.73 78.29 65.84 72.77 62.89 69.46 59.06 65.25 55.43 61.29 52.44 57.98 49.03 53.95 Electrical Characteristics (TA=25℃ unless otherwise noted) (Continue) 5.0SMDJ11 5.0SMDJ11A 5.0SMDJ12 5.0SMDJ12A 5.0SMDJ13 5.0SMDJ13A 5.0SMDJ14 5.0SMDJ14A 5.0SMDJ15 5.0SMDJ15A 5.0SMDJ16 5.0SMDJ16A 5.0SMDJ17 5.0SMDJ17A 5.0SMDJ18 5.0SMDJ18A 5.0SMDJ19 5.0SMDJ19A 5.0SMDJ20 5.0SMDJ20A 5.0SMDJ22 5.0SMDJ22A 5.0SMDJ24 5.0SMDJ24A 5.0SMDJ26 5.0SMDJ26A 5.0SMDJ28 5.0SMDJ28A 5.0SMDJ30 5.0SMDJ30A 5.0SMDJ33 5.0SMDJ33A 5.0SMDJ36 5.0SMDJ36A 5.0SMDJ40 5.0SMDJ40A 5.0SMDJ43 5.0SMDJ43A 5.0SMDJ45 5.0SMDJ45A 5.0SMDJ48 5.0SMDJ48A 5.0SMDJ51 5.0SMDJ51A 5.0SMDJ54 5.0SMDJ54A 5.0SMDJ58 5.0SMDJ58A 5.0SMDJ11C 5.0SMDJ11CA 5.0SMDJ12C 5 0SMDJ12CA 5.0SMDJ13C 5.0SMDJ13CA 5.0SMDJ14C 5.0SMDJ14CA 5.0SMDJ15C 5.0SMDJ15CA 5.0SMDJ16C 5.0SMDJ16CA 5.0SMDJ17C 5.0SMDJ17CA 5.0SMDJ18C 5.0SMDJ18CA 5.0SMDJ19C 5.0SMDJ19CA 5.0SMDJ20C 5.0SMDJ20CA 5.0SMDJ22C 5.0SMDJ22CA 5.0SMDJ24C 5.0SMDJ24CA 5.0SMDJ26C 5.0SMDJ26CA 5.0SMDJ28C 5.0SMDJ28CA 5.0SMDJ30C 5.0SMDJ30CA 5.0SMDJ33C 5.0SMDJ33CA 5.0SMDJ36C 5.0SMDJ36CA 5.0SMDJ40C 5.0SMDJ40CA 5.0SMDJ43C 5.0SMDJ43CA 5.0SMDJ45C 5.0SMDJ45CA 5.0SMDJ48C 5.0SMDJ48CA 5.0SMDJ51C 5.0SMDJ51CA 5.0SMDJ54C 5.0SMDJ54CA 5.0SMDJ58C 5.0SMDJ58CA 5PDW 5PDX 5PDY 5PDZ 5PED 5PEE 5PEF 5PEG 5PEH 5PEK 5PEL 5PEM 5PEN 5PEP 5PEQ 5PER 5PES 5PET 5PEU 5PEV 5PEW 5PEX 5PEY 5PEZ 5PFD 5PFE 5PFF 5PFG 5PFH 5PFK 5PFL 5PFM 5PFN 5PFP 5PFQ 5PFR 5PFS 5PFT 5PFU 5PFV 5PFW 5PFX 5PFY 5PFZ 5PGD 5PGE 5PGF 5PGG 5BDW 5BDX 5BDY 5BDZ 5BED 5BEE 5BEF 5BEG 5BEH 5BEK 5BEL 5BEM 5BEN 5BEP 5BEQ 5BER 5BES 5BET 5BEU 5BEV 5BEW 5BEX 5BEY 5BEZ 5BFD 5BFE 5BFF 5BFG 5BFH 5BFK 5BFL 5BFM 5BFN 5BFP 5BFQ 5BFR 5BFS 5BFT 5BFU 5BFV 5BFW 5BFX 5BFY 5BFZ 5BGD 5BGE 5BGF 5BGG 11.0 11.0 12.0 12.0 13.0 13.0 14.0 14.0 15.0 15.0 16.0 16.0 17.0 17.0 18.0 18.0 19.0 19.0 20.0 20.0 22.0 22.0 24.0 24.0 26.0 26.0 28.0 28.0 30.0 30.0 33.0 33.0 36.0 36.0 40.0 40.0 43.0 43.0 45.0 45.0 48.0 48.0 51.0 51.0 54.0 54.0 58.0 58.0 12.20 12.20 13.30 13.30 14.40 14.40 15.60 15.60 16.70 16.70 17.80 17.80 18.90 18.90 20.00 20.00 21.10 21.10 22.20 22.20 24.40 24.40 26.70 26.70 28.90 28.90 31.10 31.10 33.30 33.30 36.70 36.70 40.00 40.00 44.40 44.40 47.80 47.80 50.00 50.00 53.30 53.30 56.70 56.70 60.00 60.00 64.40 64.40 14.90 13.50 16.30 14.70 17.60 15.90 19.10 17.20 20.40 18.50 21.80 19.70 23.10 20.90 24.40 22.10 25.76 23.30 27.10 24.50 29.80 26.90 32.60 29.50 35.30 31.90 38.00 34.40 40.70 36.80 44.90 40.60 48.90 44.20 54.30 49.10 58.40 52.80 61.10 55.30 65.10 58.90 69.30 62.70 73.30 66.30 78.70 71.20 5.0SMDJ Series
Surface Mount Transient Voltage Suppressors (TVS) Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information. 5.0SMDJ Series VRWM (V) Breakdown Voltage VBR (V) @IT Maximum Clamping Voltage VC @IPP (V) Maximum Peak Pulse Current IPP (A) Maximum Reverse Leakage IR @VRWM (μA) Test Current IT (mA) MIN MAX Marking Uni Bi Electrical Characteristics (TA=25℃ unless otherwise noted) (Continue) 5.0SMDJ60 5.0SMDJ60A 5.0SMDJ64 5.0SMDJ64A 5.0SMDJ70 5.0SMDJ70A 5.0SMDJ75 5.0SMDJ75A 5.0SMDJ78 5.0SMDJ78A 5.0SMDJ80 5.0SMDJ80A 5.0SMDJ85 5.0SMDJ85A 5.0SMDJ90 5.0SMDJ90A 5.0SMDJ100 5.0SMDJ100A 5.0SMDJ110 5.0SMDJ110A 5.0SMDJ120 5.0SMDJ120A 5.0SMDJ130 5.0SMDJ130A 5.0SMDJ140 5.0SMDJ140A 5.0SMDJ150 5.0SMDJ150A 5.0SMDJ160 5.0SMDJ160A 5.0SMDJ170 5.0SMDJ170A 5.0SMDJ180 5.0SMDJ180A 5.0SMDJ190 5.0SMDJ190A 5.0SMDJ200A 5.0SMDJ220A 5.0SMDJ250A 5.0SMDJ300A 5.0SMDJ350A 5.0SMDJ400A 5.0SMDJ440A 5.0SMDJ60C 5.0SMDJ60CA 5.0SMDJ64C 5.0SMDJ64CA 5.0SMDJ70C 5.0SMDJ70CA 5.0SMDJ75C 5.0SMDJ75CA 5.0SMDJ78C 5.0SMDJ78CA 5.0SMDJ80C 5.0SMDJ80CA 5.0SMDJ85C 5.0SMDJ85CA 5.0SMDJ90C 5.0SMDJ90CA 5.0SMDJ100C 5.0SMDJ100CA 5.0SMDJ110C 5.0SMDJ110CA 5.0SMDJ120C 5.0SMDJ120CA 5.0SMDJ130C 5.0SMDJ130CA 5.0SMDJ140C 5.0SMDJ140CA 5.0SMDJ150C 5.0SMDJ150CA 5.0SMDJ160C 5.0SMDJ160CA 5.0SMDJ170C 5.0SMDJ170CA 5.0SMDJ180C 5.0SMDJ180CA 5.0SMDJ190C 5.0SMDJ190CA 5.0SMDJ200CA 5.0SMDJ220CA 5.0SMDJ250CA 5.0SMDJ300CA 5.0SMDJ350CA 5.0SMDJ400CA 5.0SMDJ440CA 5PGH 5PGK 5PGL 5PGM 5PGN 5PGP 5PGQ 5PGR 5PGS 5PGT 5PGA 5PGB 5PGU 5PGV 5PGW 5PGX 5PGY 5PGZ 5PHD 5PHE 5PHF 5PHG 5PHH 5PHK 5PHA 5PHB 5PHL 5PHM 5PHN 5PHP 5PHQ 5PHR 5PHS 5PHT 5PHU 5PHV 5PHW 5PHX 5PHZ 5PJE 5PJG 5PJK 5PJM 107.0 96.8 114.0 103.0 125.0 113.0 134.0 121.0 139.0 126.0 143.2 129.6 151.0 137.0 160.0 146.0 179.0 162.0 196.0 177.0 214.0 193.0 231.0 209.0 250.6 226.8 268.0 243.0 287.0 259.0 304.0 275.0 322.2 291.6 340.1 307.8 324.0 356.0 405.0 486.0 567.0 648.0 713.0 47.20 52.17 44.30 49.03 40.40 44.69 37.69 41.74 36.33 40.08 35.27 38.97 33.44 36.86 31.56 34.59 28.21 31.17 25.77 28.53 23.60 26.17 21.86 24.16 20.15 22.27 18.84 20.78 17.60 19.50 16.61 18.36 15.67 17.32 14.85 16.41 15.43 14.04 12.35 10.29 8.82 7.72 7.01 Note: 1. Suffix 'A ' denotes 5% tolerance device. Without 'A' denotes 10% tolerance device. 2. Add suffix 'C 'or ' CA ' after part number to specify Bi-directional devices. 3. For Bi-Directional devices having VR of 10 volts and under, the IR limit is double . 5BGH 5BGK 5BGL 5BGM 5BGN 5BGP 5BGQ 5BGR 5BGS 5BGT 5BGA 5BGB 5BGU 5BGV 5BGW 5BGX 5BGY 5BGZ 5BHD 5BHE 5BHF 5BHG 5BHH 5BHK 5BHA 5BHB 5BHL 5BHM 5BHN 5BHP 5BHQ 5BHR 5BHS 5BHT 5BHU 5BHV 5BHW 5BHX 5BHZ 5BJE 5BJG 5BJK 5BJM 60.0 60.0 64.0 64.0 70.0 70.0 75.0 75.0 78.0 78.0 80.0 80.0 85.0 85.0 90.0 90.0 100.0 100.0 110.0 110.0 120.0 120.0 130.0 130.0 140.0 140.0 150.0 150.0 160.0 160.0 170.0 170.0 180.0 180.0 190.0 190.0 200.0 220.0 250.0 300.0 350.0 400.0 440.0 66.70 66.70 71.10 71.10 77.80 77.80 83.30 83.30 86.70 86.70 88.80 88.80 94.40 94.40 100.00 100.00 111.00 111.00 122.00 122.00 133.00 133.00 144.00 144.00 155.00 155.00 167.00 167.00 178.00 178.00 189.00 189.00 201.00 201.00 211.00 211.00 224.00 246.00 279.00 335.00 391.00 447.00 492.00 81.50 73.70 86.90 78.60 95.10 86.00 102.00 92.10 106.00 95.80 108.80 97.60 115.00 104.00 122.00 111.00 136.00 123.00 149.00 135.00 163.00 147.00 176.00 159.00 190.40 171.00 204.00 185.00 218.00 197.00 231.00 209.00 244.80 220.00 258.40 232.00 247.00 272.00 309.00 371.00 432.00 494.00 543.00
Surface Mount Transient Voltage Suppressors (TVS) Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information. 5.0SMDJ Series Ratings and Characteristic Curves (TA=25°C unless otherwise noted) Figure 1 - Peak Pulse Power Rating Curve Figure 2 - Pulse Derating Curve Figure 3 - Pulse Waveform Figure 4 - Typical Junction Capacitance Figure 5 - Steady State Power Derating Curve Figure 6 - Maximum Non-Repetitive Surge Current td - Pulse Width (μs) PPPM - Peak Pulse Power (kW) 100 0.1 0.1 1 10 100 1000 10000 0 25 50 75 100 125 150 175 100 TA-Ambient temperature(°C) Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage % 150 100 IPPM - Peak Pulse Current, % IRSM tr=10µsec Peak Value IPPM Half Value IPPM (IPPM/2) tc 10/1000µsec. Waveform as defined by R.E.A 0 1.0 2.0 3.0 4.0 TJ=25°C Pulse Width(td) is defined as the point where the peak current decays to 50% of IPPM t - Time (ms) 100000 1.0 10.0 100.0 1000.0 1000 100 VBR-Reverse Breakdown Voltage (V) CJ – Junction Capacitance (pF) 10000 Tj=25°C f=1.0MHz Vsig=50mVp-p Bi-directional @zero bins Uni-directional @zero bins Uni-directional @VRWM Bi-directional @VRWM Number of Cycles at 60Hz IFSM-Peak Forward Surge Current (A) 1 10 100 250 200 150 100 300 TJ=TJ max. 8.3 ms Single Half Sine-Wave 5.0 0 25 50 75 100 125 150 175 200 4.0 3.0 2.0 1.0 0.0 TL - Lead Temperature(°C) PM(AV), Steady State Power Dissipation (W) 6.0 7.0 8.0
Surface Mount Transient Voltage Suppressors (TVS) Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information. 5.0SMDJ Series Physical Specifications Environmental Specifications Weight Case Polarlty Terminal 0.007 ounce, 0.21 gram JEDEC DO-214AB Molded Plasticover glass passivated junction Matte Tin-plated leads, Solderable per JESD22-B102D Color band denotes cathode except Bipolar JESD22-A104 JESD22-A102 JESD22-A103 JESD22-A108 JESD22-A106 Temperature Cycle Pressure Cooker High Temp. Storage HTRB Thermal Shock Soldering Parameters V VC VBR VR IR VFIT IPP Uni-directional VVC VBR VR VCVBRVR IR IR IT IT IPP IPP Bi-directional Lead–free assembly 150°C 200°C 60 -180 Seconds 3°C/Second max 3°C/Second max 217°C 60 -150 Seconds 260 +0/-5°C 20-40 Seconds 6°C/Second Max 8 minutes Max 280°C Reflow Condition Pre Heat -Temperature Min (Ts(min)) -Temperature Max (Ts(max)) - Time (min to max) (TS) Average ramp up rate ( Liquidus Temp TL) to peak TS(max) to TL - Ramp-up Rate Reflow - Temperature (TL) (Liquidus) - Time (min to max) (TS) Peak Temperature (TP) Do not exceed Time 25°C to peak Temperature (TP) Time within 5°C of actual peak Temperature (TP) Ramp-down Rate TimeTime to peak temperature ( T25℃ to peak) Preheat Ts(min) Ts(max) TL TL TP Temperature Ramp-up Ramp-down Critical Zone TL toTP TP Ts
Surface Mount Transient Voltage Suppressors (TVS) Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information. 5.0SMDJ Series DO-214AB (SMC) Cathode Band Dimensions Min Max MaxMin Inches Millimeters A B C D E F G H I J K L 0.114 0.260 0.220 0.079 0.030 0.305 0.006 0.129 0.094 0.094 0.126 0. 280 0.245 0.103 0.060 0.008 0.320 0.012 0.165 2.86 6.520 5.520 1.980 0.750 7.640 0.152 3.300 2.400 2.400 3.160 7.020 6.150 2.590 1.510 0.203 8.020 0.305 4.200 5 . 0 SMDJ C Axxx 5% VBR VOLTAGE TOLERANCE BI-DIRECTIONAL VRWM VOLTAGE SERIES I
Surface Mount Transient Voltage Suppressors (TVS) Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information. 5.0SMDJ Series Tape and Reel Specifications 0.061 (1.55) 0.512(13.0) Arbor Hole Diamete Dimensions are in inches (and millimeters) Direction of Feed 0.63 (16.0) Diameter Cover tape 0.315 (8.0) 0.157 (4.0) 0.53 (13.4Ď 13.0 (330.0) 0.78 (19.8)
Ordering Information
Package Quantity Packaging Option 5.0SMDJXXXXX DO-214AB 3,000 Packaging Specification Tape & Reel -16mm/13″tape EIA STD RS-481
Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information. Disclaimer ROHS UNSEMI RESERVES THE RIGHT TO MAKE CHANGE ON OUR PRODUTS , PRODUCTS SPECIFICATION AND DATA WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. UN SEMICONDUCTOR LIMITED its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “UNSEMI”)does not give any representations or warranties for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. In no event shall UNSEMI be liable for any indirect, incidental, punitive, special or consequential damages (including any and all implied warranties, warranties of fitness for particular purpose, non-infringement and merchantability.) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Statements regarding the suitability of products for certain types of applications are based on UNSEMI knowledge of typical requirements that are often placed on UNSEMI products in generic applications. Such statements are not binding, statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify UNSEMI's terms and conditions of purchase, including but not limited to the warranty expressed therein. Unless otherwise agreed in writing, UNSEMI product is not designed, authorized or warranted to be suitable for use in medical life-saving, or life-sustaining application , nor in applications where failure or malfunction of a UNSEMI product can reasonably be expected to result in personal injury, death or severe property or environmental damage. UNSEMI and its suppliers accept no liability for inclusion or use of UNSEMI products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk. All referenced brands, product names, service names and trademarks are the property of their respective owners.