5.0SMDJ5.0A AOSMD
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 4
Technical content
www.aosmd.com Rev.2.2 July 2021 Page 1 of 4 DO-214AB (SMC J-Bend) Agency Agency File Number E521119 PRIMARY CHARACTERISTICS VRWM 5.0V to 170V VBR 6.4V to 209V PPPM 5000W TJ max 150°C Polarity Uni-directional & Bi-directional Package DO-214AB
FEATURES
For surface mounted applications in order to optimize board space Typical maximum temperature coefficient △VBR=0.1%xVBR@25°C x△T Low profile package Built-in strain relief Glass passivated junction Excellent clamping capability Repetition Rate (duty cycle):0.01% Fast response time: typically less than 1.0ps from
0 Volts to BV
Meet MSL1 Level, per J-STD-020, LF maximum peak of 260 ℃ Plastic package has Underwriters Laboratory Flammability 94V-0 Matte Tin Lead-free plated MECHANICAL DATA Case: JEDEC DO-214AB. Molded plastic Terminal: Solderable per MIL-STD-750, Method 2026 Polarity: Color band denoted positive end (cathode) except Bidirectional DEVICES FOR BIPOLAR APPLICATION For Bidirectional use Suffix CA for types 5.0SMDJ5.0CA thru types 5.0SMDJ85CA Electrical characteristics apply in both directions MAXIMUM RATINGS (25°C ambient temperature unless otherwise specified) Parameter Symbol Value Unit Peak Pulse Power Dissipation on 10/1000μs waveform (Note 1，2) PPPM 5000 Watts Peak Pulse Current of on 10/1000μs waveform (Note 1) IPPM See Next Table Amps Peak Forward Surge Current,8.3ms Single Half Sine-Wave(Note 2，3) IFSM 300 Amps Operating junction and Storage Temperature Range TJ TSTG -55 to +150 °C Typical Thermal Resistance Junction to Lead RƟJL 15 °C/W Typical Thermal Resistance Junction to Ambient RƟJA 75 °C/W Note (1) Non-repetitive current pulse above TA = 25 °C (2) Mounted on 8.0mm x 8.0mm Copper Pads to each terminal (3) 8.3ms single half sine-wave, or equivalent square wave, Duty cycle = 4 pulses per minutes maximum. 5.0SMDJ5.0 thru 5.0SMDJ170 SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
www.aosmd.com Rev.2.2 July 2021 Page 2 of 4 5.0SMDJ5.0 thru 5.0SMDJ170
ELECTRICAL CHARACTERISTICS
For bidirectional type having Vrwm of 10 volts and less, the IR limit is double PART NUMBER MARKING CODE TEST CURRENT IT (mA) BREAKDOWN VOLTAGE VBR(V) @IT REVERSE STAND- OFF VOLTAGE VRWM(V) MAXIMUM CLAMPING VOLTAGE @Ipp Vc(V) MAXIMUM PEAK PULSE CURRENT Ipp (A) MAXIMUM REVERSE LEAKAGE @ VRWM IR(μA) UNI- POLAR BI-POLAR UNI BI MIN MAX
www.aosmd.com Rev.2.2 July 2021 Page 3 of 4 5.0SMDJ5.0 thru 5.0SMDJ170 RATINGS AND CHARACTERISTICS CURVES (TA = 25℃ unless otherwise noted) Typical Junction Capacitance CJ, Junction Capacitance （pF） 100 1000 10000 100000 1 10 100 1000 Uni-directional @VR TJ = 25°C f = 1.0MHZ Vsig = 50mVp-p Bi-directional VR=0V Uni-directional VR=0V Bi-directional @VR VBR - Reverse Breakdown Voltage (V) IPPM - Peak Pulse Current, % IRSM Pulse Waveform t - Time(ms) 100 110 120 130 140 150 10/1000μsec.Waveform as defined by R.E.A. TJ = 25°C Pulse Width(td)is defined as the point where the peak current decays to 50% of IPPM td Peak Value IPPM Half Value- IPPM 0.1 100 1000 tr = 10μsec. Maximum Non-repetitive Forward Surge current uni-directional only 100 150 200 250 300 350 1 10 100 Number of Cycles at 60 HZ IFSM-Peak Forward Surge Current (A) 0.5 1.5 2.5 3.5 4.5 5.5 6.5 0 25 50 75 100 125 150 175 Steady State Power Dissipation (W) Steady State Power Derating Curve TL - Lead Temperature (°C) 10ms 0.1μs 1.0μs 10μs 100μs 1.0ms td - Pulse Width (sec.) Peak Pulse Power Rating Non-repetitive pulse waveform shown in Fig.3 TA = 25°C PPPM-Peak Pulse Power (kW) 12.5 37.5 62.5 87.5 100 0 25 50 75 100 125 150 175 200 Pulse Derating Curve Peak Pulse Power (PPP) or Current (IPPM) Derating in Percentage, % TA - Ambient Temperature (°C) Copper Pad Areas
www.aosmd.com Rev.2.2 July 2021 Page 4 of 4 5.0SMDJ5.0 thru 5.0SMDJ170
Ordering Information
Part Number Quantity Packing Option Component Package Packing Specification 5.0SMDJxxxA 3000 Tape & Reel - 16mm/13" tape DO-214AB EIA STD RS-481 AOS Green Products use reduced levels of Halogens, and are also RoHS compliant. Please visit www.aosmd.com/media/AOSGreenPolicy.pdf for additional information. Note: Green Product means Pb-free, RoHS and Halogens free compliant. Part Number Part Marking 5.0SMDJ XXX C A Narrow VBR VOLTAGE TOLERANCE BI-DIRECTIONAL VBR VOLTAGE SERIES Cathode Band Logo XXXXYW Marking Code Date Code LEGAL DISCLAIMER APPLICATIONS OR USES AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS ARE NOT AUTHORIZED. AOS DOES NOT ASSUME ANY LIABILITY ARISING OUT OF SUCH APPLICATIONS OR USES OF ITS PRODUCTS. AOS RESERVES THE RIGHT TO MAKE CHANGES TO PRODUCT SPECIFICATIONS WITHOUT NOTICE. IT IS THE RESPONSIBILITY OF THE CUSTOMER TO EVALUATE SUITABILITY OF THE PRODUCT FOR THEIR INTENDED APPLICATION. CUSTOMER SHALL COMPLY WITH APPLICABLE LEGAL REQUIREMENTS, INCLUDING ALL APPLICABLE EXPORT CONTROL RULES, REGULATIONS AND LIMITATIONS. AOS' products are provided subject to AOS' terms and conditions of sale which are set forth at: http://www.aosmd.com/terms_and_conditions_of_sale LIFE SUPPORT POLICY ALPHA AND OMEGA SEMICOND UCTOR PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.