5.0SMDJ60CA LITTELFUSE

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 5

Technical content

Features

Maximum Ratings and Thermal Characteristics A=25OC unless otherwise noted) Agency Approvals

  • Halogen-Free
  • RoHS compliant
  • For surf ace mounted applications to optimize board space
  • Lo w profile package
  • Built-in strain relief
  • Typical maximum temperat ure coefficient ΔVBR = 0.1% x VBR@25°C x ΔT
  • Glass passivated c hip junction
  • 500 0W peak pulse power capability at 10×1000μs waveform, repetition rate (duty cycles):0.01% Fast response time: t ypically less than 1 .0ps from 0V to BV min
  • Excellent clamping capabilit y
  • Lo w incremental surge resistance
  • Typical IR less than 5µA above 22V
  • High T emperature soldering guaranteed: 260°C/40 seconds at terminals Plastic package has Under writers Laboratory Flammability 94V-O
  • Matte Tin Lead–free Plated Parameter Symbol Value Unit Peak Pulse Power Dissipation at TA=25OC by 10x1000µs waveform (Fig.1)(Note 1), (Note 2) PPPM 5000 W Power Dissipation on infinite heat sink at T A=50OC PM(AV) 6.5 W Peak Forward Surge Current, 8.3ms Single Half Sine Wave (Note 3) I FSM 300 A Maximum Instantaneous Forward Voltage at 100A for Unidirectional only V F 5.0 V Operating Junction and Storage Temperature Range T J, TSTG -65 to 150 °C Typical Thermal Resistance Junction to Lead R uJL 15 °C/W Typical Thermal Resistance Junction to Ambient R uJA 75 °C/W Notes: 1 . Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2. 3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional device only,duty cycle=4 per minute maximum.

Description

5.0SMDJ Series RoHS Pb

Revision: November 15, 2011, 16:49 ©2011 Littelfuse, Inc. Specifications are subject to change without notice. T ransient Voltage Suppression Diodes Surface Mount – 5000W > 5.0SMDJ series 5.0SMDJ Series

Electrical Characteristics

(Uni) Part Number (Bi) Marking Reverse Stand off Voltage VR (Volts) Breakdown Voltage VBR (Volts) @ IT Test Current IT (mA) Maximum Clamping Voltage VC @ Ipp (V) Maximum Peak Pulse Current Ipp (A) Maximum Reverse Leakage IR @ VR (µA) Agency Approval UNI BI MIN MAX For Bidirectional type having VR of 20 volts and less,the IR limit is double.

Revision: November 15, 2011, 16:49 ©2011 Littelfuse, Inc. Specifications are subject to change without notice. T ransient Voltage Suppression Diodes Surface Mount – 5000W > 5.0SMDJ series 5.0SMDJ Series Physical Specifications Weight 0.007 ounce, 0.21 grams Case JEDEC DO214AB. Molded plastic body over glass passivated junction Polarity Color band denotes positive end (cathode) except Bidirectional. T erminal Matte Tin-plated leads, Solderable per JESD22-B102D Dimensions Dimensions Inches Millimeters Min Max Min Max A 0.114 0.126 2.900 3.200 B 0.260 0.280 6.600 7. 11 0 C 0.220 0.245 5.590 6.220 D 0.079 0.103 2.060 2.620 E 0.030 0.060 0.760 1 .520 F - 0.008 - 0.203 G 0.305 0.320 7 .750 8.130 H 0.006 0.012 0.152 0.305 I 0.129 - 3.300 - J 0.094 - 2.400 - K - 0.165 - 4.200 L 0.094 - 2.400 - Environmental Specifications T emperature Cycle JESD22-A104 Pressure Cooker JESD 22-A102 High T emp. Storage JESD22-A103 HTRB JESD22-A108 Thermal Shock JESD22-A106 Soldering Parameters Temperature (T) Time (t) Ts(min) Ts(max) TL TP ts Preheat tL tp Ramp-up Critical Zone TL to TP Ramp-down t 25˚C to Peak 25˚C Reflow Condition Lead–free assembly Pre Heat - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 180 secs Average ramp up rate (Liquidus Temp (TL) to peak 3°C/second max TS(max) to TL - Ramp-up Rate 3°C/second max Reflow - Temperature (TL) (Liquidus) 217°C - Time (min to max) (ts) 60 – 150 seconds Peak Temperature (TP) 260+0/-5 °C Time within 5°C of actual peak Temperature (t p) 20 – 40 seconds Ramp-down Rate 6°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max. Do not exceed 280°C DO-214AB (SMC J-Bend) Dimensions in inches and (millimeters) Cathode Band B F G H E C D A (all dimensions in mm) I LKJ Solder Pads

Revision: November 15, 2011, 16:49 ©2011 Littelfuse, Inc. Specifications are subject to change without notice. T ransient Voltage Suppression Diodes Surface Mount – 5000W > 5.0SMDJ series 5.0SMDJ Series Part Numbering System Packaging Options Part Marking System VOLTAGE BI-DIRECTIONAL 5% VOLTAGE TOLERANCE SERIES 5.0SMDJ XXX CA F XXXX Marking Code Littelfuse Logo Cathode BandXXXXX Trace Code Marking T ape and Reel Specification Part number Component Package Quantity Packaging Option Packaging Specification 5.0SMDJxxxXX DO-214AB 3000 Tape & Reel – 16mm/13” tape EIA STD RS-481 5.0SMDJxxxXX-T7 DO-214AB 500 Tape & Reel – 16mm/7” tape EIA STD RS-481 0.63 (16.0) 0.315 (8.0) 0.157 (4.0) 0.65 (16.4) 0.80 (20.2) Arbor Hole Dia. Optional 7” 7 .0 (187) 13” 13.0 (330) Dimensions are in inches (and millimeters). Direction of Feed 0.059 DIA(1.5) Cover tape Cathode