V23074A2001A403 TE-Connectivity-Ltd

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 4

Technical content

12-2017, Rev. 1217 www.te.com © 2017 Tyco Electronics Corporation, a TE Connectivity Ltd. company. Datasheets and product specification ac- cording to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ sec- tion, application notes and all specifications are subject to change. Micro Relay A/VFMA Automotive Relays Plug-in Micro ISO Relays 1) The values apply to a resistive or inductive load with suitable spark suppression and at maximum 13.5VDC for 12VDC or 27VDC for 24VDC load voltages. 2) For a load current duration of maximum 3s for a make/break ratio of 1:10. 3) Current and time are compatible with circuit protection by a typical automotive fuse. Relay will make, carry and break the specified current. 4) See chapter Diagnostics of Relays in our Application Notes or consult the internet at http://relays.te.com/appnotes/ 5) Electrical endurance data is not valid for diode versions. Any diode or pn-junction parallel to the coil (internal or external) will significantly decrease the electrical lifetime, especially when used for inductive loads. 6) Not applicable for polarity reverse loads like power windows ■ High current version with limiting continuous current 30A at 85°C ■ Pin assignment according to ISO 7588 part 3 ■ Customized versions on request – 24VDC versions with special contact gap – Integrated components (e.g. diode) – Customized marking – Special covers (e.g. notches, release features) – For latching version refer to Micro Relay Latching – For low noise version refer to Micro Relay Low Noise – For high current version refer to part number table Typical applications Cross carline up to 30A for example: ABS control, blower fans, cooling fan, door control, door lock, fuel pump, heated front screen, immobilizer, interior lights, seat control, seatbelt pretensioner, sun roof, trunk lock, valves, window lifter, wiper control. Max. DC load breaking capacity Load limit curve 1: arc extinguishes during transit time (CO contact). Load limit curve 2: safe shutdown, no stationary arc (NO contact). Load limit curves measured with low inductive resistors verified for 1000 switching events. Contact Data Form A Standard Form C Form A HC Form C HC Contact arrangement 1 form A, 1 form A, 1 form C, 1 form C, 1 form A, 1 form C

1 NO 1 NO 1 CO 1 CO 1 NO 1 CO

Rated voltage 12VDC 24VDC 12VDC 24VDC6) 12VDC 12VDC Limiting continuous current, form A/form B NO/NC NO/NC 23°C 30A 30A 30/20A 30/20A 35A 35/25A 85°C 25A 25A 25/15A 25/15A 30A 30/20A 125°C 10A 10A 10/8A 10/8A 15A 15/10A Limiting making current1)2), A/B (NO/NC) 120A 120A 120/40A 120/20A 120A 120/40A Limiting breaking current 30A 20A 30/15A 20/10A 30A 30/20A Limiting short-time current, overload current, ISO 8820-33) 1.35 x 25A, 1800s 1.35 x 25A, 1800s 1.35 x 30A, 1800s 2.00 x 25A, 5s 2.00 x 25A, 5s 2.00 x 30A, 5s Jump start test 24VDC for 5min conducting nominal current at 23°C Contact material silver based Min. recommended contact load4) 1A at 5VDC Initial voltage drop NO contact at 10A, typ./max. 15/200mV NC contact at 10A, typ./max. 20/250mV Frequency of operation 6 ops./min (0.1Hz) Electrical endurance5) resistive load at 14VDC >1x105 ops. >1x105 ops. >1x105 ops. 25A 25A (NO) 30A resistive load at 28VDC >1x105 ops. >1x105 ops. 15A 15A (NO) >1x10 5 ops. 10A (NC) Mechanical endurance typ. 107 ops. F074_fcw1_bw FVFMA_fcw1c

12-2017, Rev. 1217 www.te.com © 2017 Tyco Electronics Corporation, a TE Connectivity Ltd. company. Datasheets and product specification ac- cording to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ sec- tion, application notes and all specifications are subject to change. Micro Relay A/VFMA (Continued) Automotive Relays Plug-in Micro ISO Relays Other Data EU RoHS/ELV compliance compliant Ambient temperature -40 to +125°C Climatic cycling with condensation, EN ISO 6988 6 cycles, storage 8/16h Temperature cycling, IEC 60068-2-14, Nb 10 cycles, -40/+85°C (5°C/min) Damp heat cyclic, IEC 60068-2-30, Db, Variant 1 6 cycles, upper air temp. 55°C Damp heat constant, IEC 60068-2-3 (78), Ca 56 days Category of environmental protection, IEC 61810 RT I – dustproof Degree of protection, IEC 60529 IP54 Corrosive gas IEC 60068-2-42 10±2cm3/m3 SO2, 10 days IEC 60068-2-43 1±0.3cm3/m3 H2S, 10 days Vibration resistance (functional) IEC 60068-2-6 (sine sweep) 10 to 500Hz min. 5g8) Shock resistance (functional) IEC 60068-2-27 (half sine) min. 20g 11ms8) Drop test, free fall, IEC 60068-2-32 1m onto concrete Terminal type plug-in, QC Cover retention axial force 150N pull force 150N push force 200N Terminal retention pull force 100N push force 100N resistance to bending 10N9) force applied to side 10N9) torque 0.3Nm Weight approx. 16 to 20g (0.5 to 0.7oz) Packaging unit Micro A 480 pcs. VFMA 600 pcs. 8) No change in the switching state >10µs. Valid for NC contacts, NO contact values significantly higher. 9) Values apply 2mm from the end of the terminal. When the force is removed, the terminal must not have moved by more than 0.3mm Accessories For details see datasheet Connectors for Micro ISO Relays Coil Data Coil voltage range 12/24VDC Coil versions, DC coil Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance7) power 7) VDC VDC VDC Ω±10% W 001 12 7.2 1.6 119 1.20 002 24 14.4 3.6 430 1.34 005 12 7.2 1.6 144 1.00 F 12 7.2 1.2 90 1.60 H 24 14.4 3.6 430 1.34 All figures are given for coil without pre-energization, at ambient temperature +23°C. 7) Without components in parallel. Insulation Data Initial dielectric strength between open contacts 500VACrms between contact and coil 500VACrms Load dump test ISO 7637-1 (12VDC), test pulse 5 Vs=+86.5VDC ISO 7637-2 (24VDC), test pulse 5 Vs=+200VDC NOD 1 form A, 1 NO with diode NOR 1 form A, 1 NO with resistor Terminal Assignment COD 1 form C, 1 CO with diode COR 1 form C, 1 CO with resistor 2 54 2 5 Does not take into account the temperature rise due to the contact current E = pre-energization. Does not take into account the temperature rise due to the contact current E = pre-energization TE074_OVR1 Coil operating range

12-2017, Rev. 1217 www.te.com © 2017 Tyco Electronics Corporation, a TE Connectivity Ltd. company. Datasheets and product specification ac- cording to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ sec- tion, application notes and all specifications are subject to change. Micro Relay A/VFMA (Continued) Automotive Relays Plug-in Micro ISO Relays View of the terminals (bottom view) Dimensions Quick connect terminal similar to ISO 8092-1. Micro A: Terminals without holes VFMA: Terminals with holes

12-2017, Rev. 1217 www.te.com © 2017 Tyco Electronics Corporation, a TE Connectivity Ltd. company. Datasheets and product specification ac- cording to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ sec- tion, application notes and all specifications are subject to change. Micro Relay A/VFMA (Continued) Automotive Relays Plug-in Micro ISO Relays Product code structure Typical product code V23074 -A 1 001 -A4 02 Type V23074 Micro Relay A Version A Standard H High current Coil suppression

1 Resistor 2 Diode

001 12VDC 002 24VDC 005 12VDC for high current version Contact material -A4 Silver based -A5 Silver based for high current version Contact arrangement 02 1 form A, 1 NO 03 1 form C, 1 CO Product code structure Typical product code VFMA -1 1 F 4 1 -S01 Type VFMA VFMA Series Version

1 Standard

1 1 form A, 1 NO 5 1 form C, 1 CO Coil F 12VDC H 24VDC Contact material

4 Silver based 7 Silver based for high current version

1 Plug-in

suppr. Cir- cuit1) Cover Color Coil Arrange- ment Termi- nals Part number V23074-A1001-A402 VFMA-11F41-S01 Standard Resistor 680Ω NOR Black 12VDC 1 form A, 1 NO Plug-in, QC 4-1904124-2 VFMA-11F41-S01 V23074-A1001-A402 9-1393292-9 V23074-A1001-A403 VFMA-15F41-S01 COR 1 form C, 1 CO 4-1904124-3 VFMA-15F41-S01 V23074-A1001-A403 1393293-8 V23074-A2001-A402 V23074-A2201-X147 Diode NOD 1 form A, 1 NO 5-1393292-8 V23074-A2201-X147 V23074-A2001-A402 Blue 5-1904135-9 V23074-A2001-A403 V23074-A2101-X148 COD Black 1 form C, 1 CO 6-1419137-4 V23074-A2101-X148 V23074-A2001-A403 Red 6-1904135-0 V23074-H1005-A502 High current Resistor 1000Ω NOR Black 1 form A, 1 NO 4-1904124-4 V23074-A1002-A402 VFMA-11H41-S01 Standard Resistor 1800Ω 24VDC 8-1393292-9 VFMA-11H41-S01 V23074-A1002-A402 6-1415008-2 V23074-A1002-A403 COR 1 form C, 1 CO 3-1393292-8 V23074-A2002-A402 Diode NOD 1 form A, 1 NO 6-1393292-2 V23074-A2002-A403 COD 1 form C, 1 CO 6-1393292-3 1) See terminal assignment diagrams. Other types on request. This list represents the most common types and does not show all variants covered by this datasheet. Production in Asia (only) Product code Version Coil suppression Circuit1) Cover Color Coil Arrange- ment Termi- nals Part number V23074-A1001-A402 Standard Resistor 680Ω NOR Black 12VDC 1 form A, 1 NO Plug-in, QC 1393292-5 V23074-A1001-A403 COR 1 form C, 1 CO 8-1393292-4 V23074-A2001-A402 Diode NOD 1 form A, 1 NO 2-1904111-7 V23074-A2001-A403 COD 1 form C, 1 CO 9-1904105-7 V23074-H1005-A502 High current Resistor 1000Ω NOR 1 form A, 1 NO 2-1414971-4 1) See terminal assignment diagrams. Other types on request. This list represents the most common types and does not show all variants covered by this datasheet.