5-146285-1

5-146288-3 MACOM

Document overview

• Manufacturer or author: Provided By digicamel.com
• PDF pages: 2

Technical content

Catalog 1307819 Dimensions are in inches and Dimensions ar e shown for USA: 1-800-522-6752 South America: 55-11-2103- 6000 Revised 8-08 millimeters unless otherwise reference purp oses only. Canada: 1-905-470-4425 Hong Kong: 852-2735-162 8 specified. Values in brackets Specifications subject Mex ico: 01-800-733-8926 Japan: 81-44-844-8013 Breakaway and Retention Headers—Unshrouded AMPMODU Interconnection System Breakaway and Retention Headers—Unshrouded Product Facts I Design and inventory versatility—headers can be broken into any size needed I Variety of popular sizes available I Substantial time/labor savings can install all posts at one time I Vertical and right-angle versions available in single- and double-row configurations I Phosphor bronze posts I Choice of gold duplex or tin plated posts I Post lengths include .230 connector mating I Board retention feature available I Black, glass-filled thermoplastic housings; high temperature compatible I Recognized under the Component Program of Underwriters Laboratories Inc., File No. E28476 I Certified by Canadian Standards Association, File No. LR 7189 Performance Characteristics Electrical Insulation Resistance — 5,000 megohms minimum initial Dielectric Withstanding Voltage —

750 V rms at sea level

Operating Temperature — -65°C to +105°C (black thermoplastic housings) Current — 3 amperes maximum per contact (dependent upon mating receptacle) R R

Catalog 1307819 Dimensions are in inches and Dimensions ar e shown for USA: 1-800-522-6752 South America: 55-11-2103- 6000 Revised 8-08 millimeters unless otherwise reference purp oses only. Canada: 1-905-470-4425 Hong Kong: 852-2735-162 8 specified. Values in brackets Specifications subject Mex ico: 01-800-733-8926 Japan: 81-44-844-8013 Breakaway Headers—Unshrouded, Single-Row, .100 [2.54] Ce nterline AMPMODU Interconnection System Note: All part numbers are RoHS compliant. Breakaway and Retention Headers-Unshrouded *±.003 [±0.08] tolerances not to accumulate within one connector pattern. Headers with Solder Tails Material and Finish Housing — Black thermoplastic, 94V-0 rated, high temperature compatible Posts — Phosphor bronze, plated as follows: Plating A — Duplex plated .000030 [0.00076] gold on contact area, .000100- .000200 [0.00254-0.00508] tin on solder tail, with entire post underplated .000050 [0.00127] nickel Plating B — Duplex plated .000015 [0.00038] gold on contact area, .000100- .000200 [0.00254-0.00508] tin on solder tail, with entire post underplated .000050 [0.00127] nickel Plating C — .000100-.000200 [0.00254-0.00508] tin over .000050 [0.00127] nickel Performance Characteristics (Board Retention Tails) Insertion Force — 12 lb [53.4N] max. Retention Force — .25 lb [1.11N] min. Related Product Data Mateable Connectors — Refer to the Mating Post Selection Guide — page 90 Technical Documents — page 276 See mating connector for applicable product and application specifications. .025 [0.64] Square Straight Posts A B E Ref. (Contact Area) B .025 [0.64] Typ. .045 [1.14] Typ. .090±.002 [2.29±0.05] D C .090 [2.29] Style Pos. A B Post Plating/Part Nos. Post Plating/Part Nos. Post Pl ating/Part Nos. Plating A Plating B Plating C Plating A Plating B Platin g C Plating A Plating B Plating C With — 5-146285-1 5-146284-1 5-146282-1 5-146281-1 5-146280-1 5-146278-1 5-146277-1 5-146276-1 5-146274-1 Solder Tails 1 .084 [2.13] With Board 5-146297-3 5-146296-3 5-146294-3 5-146293-3 5-146292-3 5 -146290-3 5-146289-3 5-146288-3 5-146286-3 Retention Tails 3 .284 [7.21] .200 [5.08] Notes: 1. Headers without retention tails may be broken to the desired number of positions using Tool Kit No. 314818-1 (not shown) . 2. Headers are also available in sizes 2 thru 39 positions (with Solder Tails) and 4 thru 39 positions (with Board Retention Tails). When ordering, add the prefix and/or suffix (dash) numbers plus 5- -0 to the base part number that corresponds with the desired size. For example, the complete part number for an 8-position header with solder tails (C dimension be 7-146292-6. This part numbering system applies only to this page. Headers with a C dimension of .090 [2.29] have swaged tails for all sizes. .030±.002 [0.76±0.05] .035±.003 [0.89±0.08] Dia. Typ. (Plated) Recommended Hole Size Before Plating .045±.001 [1.14±0.02] Dia. Typ. Recommended PC Board Mounting Pattern (for .062 [1.57] thick PC board; .008 [.203] thick stencil) *±.003 [±0.08] tolerances not to accumulate within one connector pattern. A B E Ref. (Contact Area) B .025 [0.64] Typ. .045 [1.14] Typ. .150±.002 [3.81±0.05] D C (see note 3) .090 [2.29] .030±.002 [0.76±0.05] .040±.003 [1.02±0.08] Dia. Typ. (Plated) Recommended Hole Size Before Plating .045±.001 [1.14±0.02] Dia. Typ. Recommended PC Board Mounting Pattern (for .062 [1.57] thick PC board; .008 [.203] thick stencil) Headers with Board Retention Tails .100* [2.54] .100* [2.54]