DPDM-Q-10-5-S-PA FESTO
Document overview
- PDF pages: 1
Technical content
Page 1
Compact air cylinder DPDM-Q-10-5-S-PA
Part number: 4833119

Data sheet
| Feature | Value |
| Stroke | 5 mm |
| Piston diameter | 10 mm |
| Type code | DPDM |
| Cushioning | Elastic cushioning rings/pads at both ends |
| Mounting position | Any |
| Mode of operation | Pushing Single-acting |
| Design | Piston Piston rod Profile barrel |
| Position sensing | For proximity sensor |
| Symbol | 00991732 |
| Variants | Piston rod at one end |
| Protection against torsion/guide | Guide rod with yoke |
| Operating pressure | 2 bar ... 8 bar |
| Operating medium | Compressed air as per ISO 8573-1:2010 [7:4:4] |
| Information on operating and pilot media | Operation with oil lubrication possible (required for further use) |
| Corrosion resistance class (CRC) | 1 - Low corrosion stress |
| Ambient temperature | -10 °C ... 80 °C |
| Theoretical force at 6 bar | 38 N |
| Theoretical force at 6 bar, advancing | 38 N |
| Moving mass at 0 mm stroke | 13 g |
| Additional weight per 10 mm stroke | 7.5 g |
| Basic weight with 0 mm stroke | 37 g |
| Additional moving mass per 10 mm stroke | 1.3 g |
| Type of mounting | With internal thread With through-hole Optionally: |
| Pneumatic connection | M5 |
| Note on materials | RoHS-compliant |
| Cover material | Wrought aluminum alloy |
| Seals material | NBR TPE-U(PU) |
| Housing material | Wrought aluminum alloy, anodized |
| Piston rod material | High-alloy stainless steel |
7/30/20 - Subject to change - Festo AG & Co. KG
1/1