4827505 FESTO
Document overview
- PDF pages: 2
Technical content
Page 1
Counter module CPX-E-1CI
Part number: 4827505
Data sheet
| Feature | Value |
| Dimensions W x L x H | 18.9 mm x 76.6 mm x 124.3 mm |
| Width dimension | 18.9 mm |
| Type code | CPX-E |
| No. of inputs | 4 |
| Diagnostics via LED | Encoder supply fault Faults per module Encoder error Encoder normal operation Encoder supply normal operation Status per channel |
| Diagnostics via bus | Measuring system error Sensor supply short circuit/overload Parameter error Wire break monitoring Zero-pulse monitoring Misalignment monitoring |
| Module parameters | Signal type/encoder type Signal analysis Line break monitoring Misalignment monitoring Zero-pulse monitoring Pulses/zero pulse Latch signal Latch event Latching response Upper counting limit Lower count limit Load value Debounce time for digital inputs Speed measurement integration time Internal revision ID |
| Channel parameters | Signal extension |
| Input debounce time | 0.02 ms 0.1 ms 3 ms |
| Fuse protection (short circuit) | Internal electronic fuse per module |
| Intrinsic current consumption at nominal operating voltage for electronics/sensors | Typically 15 mA |
| Max. residual current of inputs per module | 1.8 A |
| Nominal operating voltage DC for electronics/sensors | 24 V |
| Power failure buffering | 10 ms |
| Electrical isolation between channel and internal bus | no |
| Electrical isolation between channels | no |
6/9/21 - Subject to change - Festo AG & Co. KG
1/2
Page 2
| Feature | Value |
| Switching level | Signal 0: <= 5 V Signal 1: >= 11 V |
| Permissible voltage fluctuations for electronics/sensors | ± 25 % |
| Power supply, function | Encoder supply |
| Power supply, type of connection | Terminal strip |
| Power supply, connection technology | Spring-loaded terminal |
| Power supply, number of pins/wires | 6 |
| Power supply, connection pattern | 00995844 |
| Power supply, conductor diameter | 0.2 mm² ... 1.5 mm² |
| Power supply, information on conductor diameter | 0.2 - 2.5 mm² for flexible conductors without cable end sleeves |
| Certification | RCM compliance mark c UL us - Listed (OL) |
| KC characters | KC EMC |
| CE marking (see declaration of conformity) | As per EU EMC directive |
| Certificate issuing authority | UL E239998 |
| Vibration resistance | Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6 |
| Shock resistance | Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27 |
| Corrosion resistance class (CRC) | 0 - No corrosion stress |
| Storage temperature | -20 °C ... 70 °C |
| Relative air humidity | 95 % Non-condensing |
| Degree of protection | IP20 |
| Ambient temperature | -5 °C ... 50 °C |
| Note on ambient temperature | -5 - 60 °C for vertical installation |
| Product weight | 88 g |
| Max. address capacity outputs | 2 byte |
| Max. address capacity inputs | 12 byte |
| Input characteristics | As per IEC 61131-2, type 3 |
| Input switching logic | PNP (positive switching) 2-wire sensors as per IEC 61131-2 3-wire sensors as per IEC 61131-2 |
| Electrical connection input, function | Digital input |
| Electrical connection input, connection type | 2x terminal strip |
| Electrical input connection, connection technology | Spring-loaded terminal |
| Electrical connection, input, number of pins/wires | 6 |
| Electrical connection for input, connection pattern | 00995843 |
| Electrical connection for input, conductor cross section | 0.2 mm² ... 1.5 mm² |
| Electrical connection for input, information on conductor cross section | 0.2 - 2.5 mm² for flexible conductors without cable end sleeves |
| Electrical connection input 2, function | Counter input |
| Electrical connection input 2, connection type | Terminal strip |
| Electrical input 2 connection, connection technology | Spring-loaded terminal |
| Electrical connection, input 2, number of pins/wires | 6 |
| Electrical connection for input 2, connection pattern | 00995848 |
| Electrical connection for input 2, conductor cross section | 0.2 mm² ... 1.5 mm² |
| Electrical connection for input 2, information on conductor cross section | 0.2 - 2.5 mm² for flexible conductors without cable end sleeves |
| Type of mounting | With H-rail |
| Note on materials | Contains paint-wetting impairment substances RoHS-compliant |
| Housing material | PA |
6/9/21 - Subject to change - Festo AG & Co. KG
2/2